1. A Damper for every Duct! Young Regulator Product Line Think Young!

2. BOWDEN CABLE CONTROLLED REMOTE BALANCING DAMPERS Because the world above the ceiling is not a friendly place!

3. Balancing Dampers "Volume dampers should not be placed closer than 5 ft. from an air outlet for good design." It goes on to state "Balancing dampers... should not be placed directly upstream of air devices or open ended ducts in acoustically critical spaces. They should be located 5 to 10 duct diameters from the termination device. The sound approach conditions caused by improperly located control dampers...can easily increase sound levels by 10 to 20 dB. The further a damper is installed from the air outlet, the lower the resultant sound level..." ASHRAE Applications Handbook, Chapter 46, Section 8, Sound and Vibration Control Copied from the ASHRAE website

4. 270 Bowden Controller Rack and Pinion Controller – Rotation (A) turned into a linear push/pull (B) – Lengths to 50 ft – Cut to length in the field – Hardware for Dampers by Others (B kits) Front View Side View

5. Bowden Concealed Ceiling Terminations 270-275 270-301 270-EZ 270-896 Above DropDie Cast Cover with threaded “C” Bracket with Ceiling Ceiling Cup Ceiling Bracket Ceiling Plug

6. Bowden wall Mounted Controls Wall Mount 4x4 box Rotate the knob to adjust the quantity of Airflow

7. Bowden Controls 270-301Where it all Started Rack and Pinion with a Ceiling cup Controlling a standard 5020CC or 820 Rectangular 5020CC 301 Ceiling Cup 030-12 Adjustment Wrench

8. Bowden Controls “B” Kits Hardware for Dampers by others – Specify shaft Diameter Order with Ceiling Controller – Ex. 270-275B

9. System Layout Support the BCW every 10’ Balancing Station for your convenience Bring multiple

10. Think Young!