1. NetVu Console
Product Training
V2.0 US

2. NetVu Console
Remote NetVu Connected CCTV Console with traditional joystick control.
Key Benefits
Add remote control and additional viewing to an existing standalone CCTV system with no need to retrain operators
No need for a PC for remote viewing and control
Main Features
Joystick telemetry control over the network
Controls up to 99 cameras from up to 20 NetVu Connected DVR or Servers
Works with a composite or VGA monitor (future)
(future) Simultaneous view of up to 16 cameras from any mix of sites. Currently you can only select the first camera to start the 16 way view.

3. NetVu Console Features
IP to analogue conversion allows use of composite and VGA monitors
Simple network connection via Ethernet
NetVu Connected Technology allows integration with other NetVu Connected products
Transparent Telemetry control through an associated DVR
3-axis joystick allows an operator to easily control the pan, tilt and zoom functionality with one simple movement
Common set-up interface locally or over the network
Easy configuration on local monitor using mouse control

4. NetVu Console Features
Playback from NetVu Connected DVRs
Event Search from NetVu Connected DVRs
Control via IR Remote
Audio Listen and Challenge (future)
Softkeys provide simple user and programming interface
Supported protocols via associated DVR include; Dennard, JVC, Bosch, BBV, Mark Mercer, Panasonic, American Dynamics, GE, Pelco, Samsung

5. Simplified Setup
On Screen Menus are the same as Webpages

6. Operating
NetVu Console

7. NetVu Console Keyboard
Live/Play
System Select
Help
Panic
Event
Goto
Playback
Control
Numeric
Keypad
Exit
(menus)
Menu
Menu
Cursor
Navigation

8. NetVu Console Softkeys
Navigation is via a color coded soft 5 key system.
The colored menu buttons provides an intuitive approach to operator and installer use.
The colored keys on the remote control correspond to the menu options displayed on screen.

9. Softkeys

10. Softkey Menus For PTZ cameras only Full Quad Multi Map Next Next
>>
>
<< ||
Play
Goto
Event
Setup
Next
For PTZ cameras only
Preset
ePTZ
Aux
Prog
Next

11. Installing the
NetVu Console

12. NetVu Console Connections
VGA - SVGA 15 Way D Female monitor connection
MON Ω BNC composite monitor
KBD RJ12 Connector for NetVu Console Keyboard
NET - RJ45 10/100BaseT Ethernet connection
IR mm Jack Socket for IR Remote Extender
AUD IN - RCA (phono) socket AUDIO OUT - RCA (phono) socket
SERIAL - 9 way (male) for Serial Mouse
POWER - 12V DC 10 W Mains powered, separate power supply
LEDs PWR ON – Green STATUS - Green

13. NetVu Console Connections
IR Extender Port to allow use of Standard (SD type) IR Remote Control
VGA Connector (future)
Serial Port for Mouse (Optionally used in configuring NetVu Console and Debug)

14. Configuring the
NetVu Console

15. Setting the IP Address of the NetVu Console
By default the unit is configured for DHCP where the unit is automatically allocated an IP address from the network DHCP server.
As this IP address can change without notification (i.e. if there was a power failure), it is recommended that the NetVu Console is allocated a fixed IP address to remove the possibility of address change.
If a permanent IP address is not assigned to the unit, it will attempt to contact the DHCP server every time it starts up. If for any reason, a DHCP server cannot allocate an IP address to the unit, the encoder will use a default IP address.

16. Webpage Configuration
The NetVu Console can be configured via a set of intuitive webpages or via GUI menus on the Monitor.
To access the web pages:
1. Launch a web browser such as Internet Explorer or Mozilla Firefox
2. Type the IP address of the unit into the address bar.
3. The Network page will be displayed.

17. NetVu Console Webpages
The configuration pages are
accessible using the links
on the left hand side of the
page.
NOTE: Any changes made
on the web pages are not (yet)
automatically saved when
the page is closed. Remember
to press the Save button when
making any changes.
Use the ‘Cancel’ button to revert
To the previous settings and
Then navigate away.

18. General System Settings
This page shows the general
information about the unit.
The serial port should be set for
Mouse connection as this is
useful to configure the product
When using the on-screen menus.
The default image format can be
set to JPEG or MPEG4 and image
resolution is selectable as High,
Medium or Low as normal.
Can the settings be changed just like NVO from the keyboard or remote?

19. Network Configuration
IP Address, Subnet, Gateway
are the settings that have
Already been configured using
the Serial Port configuration.
DHCP addresses will be shown
if the unit was installed on a
DHCP network.
The unit should be restarted
implement the changes.

20. Configuring Servers
To set which servers can be connected to go to the Servers page as shown.
Enter the IP addresses of the NetVu Connected servers.
Upto 20 systems can be defined each with up to 99 cameras, across multiple servers

21. Configuration GUI Menus
The NetVu Console can be easily programmed using configuration menus on the monitor.
To enter the menus:-
Either :-
Press Next until Setup appears and then press it. Or
Press the Menu button on the keyboard.
The Network page will then appear.

22. IP Address, Subnet, Gateway
settings can be programmed using the mouse.
Use the links to the left of the page to configure the General, Audio and Servers settings as per the webpages.
Press Exit to return to normal operation.

23. Simulator Webpage

24. SD video is currently not showing up through network video.
If connection to dvr is not available, the screen will not change

25. Future plans VGA output Audio Relays Alarms
Copy images using a external flash drive

26. ePTZ – used to do a Digital Zoom on a PTZ camera.
Goto Timeline
Events show the last 20 events for the DVR.