Presentation is loading. Please wait.

Presentation is loading. Please wait.

Physical Properties of Matter

Similar presentations


Presentation on theme: "Physical Properties of Matter"— Presentation transcript:

1 Physical Properties of Matter
Chapter 8 Physical Properties of Matter

2 Vocabulary Physical Properties Chemical Properties Density Crystalline
Amorphous Stress Tensile Strength Elasticity Brittleness Thermal Expansion

3 Objectives Distinguish between physical and chemical properties
Calculate the density of a substance. Calculate stress. Give examples of brittleness, elasticity, tensile strength, and thermal expansion.

4 8.1: Properties of Solids Matter has physical and chemical properties.
Different types of matter have different characteristics. Characteristics that you can see through direct observation are physical properties. Physical properties include: Color Texture Density Brittleness State

5 A physical change is any change in the size, shape, or phase of matter in which the identity of a substance does not change. Physical changes are reversible Ex. When water is frozen it changes from a liquid to a solid – this does not change water into a new substance. Properties that cannot be observed when one substance changes into a different substance are called chemical properties. Any change that transforms one substance into a different substance is called a chemical change.

6 Density is a physical property of matter
Density is the ratio of mass to volume. Density is a property of solids liquids and gases.

7 For a material that is the same throughout, the density is the same and does not depend on the amount of material you have. Solids have a wide range of densities. The density of water is 1,000 kg/m3, and many common liquids have densities between 500 and 1,500 kg/m3 The density of air and other gases is much lower. Gases have low density because the molecules in gas are far from each other.

8 The arrangement of atoms and molecules in solids
Why density varies Atoms have different masses. How closely atoms or molecules are packed together varies. The arrangement of atoms and molecules in solids The atoms or molecules in a solid are arranged in two ways: If the particles are arranged in an orderly, repeating pattern, the solid is called crystalline. If the particles are arranged in a random way, the solid is called amorphous.

9 Crystalline solids Most solids on Earth are crystalline.
The shape of a crystal comes from the cubic arrangement of sodium and chlorine atoms. Metal is also a crystalline that is made from tiny crystals fused together in a jumble of different orientations.

10 Amorphous solids Amorphous comes from the Greek for “without shape”
Unlike crystals they do not have repetitive patterns in the arrangement of molecules or atoms. Often softer and more elastic Ex. Plastic and glass

11 Solids vary in their strength
When you apply a force to an object, the object may change its size, shape or both. The concept of physical “strength” means the ability of a solid object to maintain its shape when force is applied. Strength depends on two questions: How much does the object bend or deform when force is applied? How much force can the object take before it breaks?

12 The strength of an object can be broken down into design and materials.
Design means size and shape. The strength of solid materials is described best in terms of stress, not force. Stress is the ratio of the force acting through the material divided by the cross – section area through which the force is carried. The metric unit for stress is the pascal (Pa) One pascal is equal to one newton of force per square meter of area.

13 Tensile strength is a measure of how much stress in pulling, or tension, a material can withstand before breaking.

14 Elasticity, brittleness and bending
Elasticity describes a solids ability to be stretched and then return to its original strength. Materials that do not return to their original shape are inelastic. Brittleness is defined as the ability of a solid to crack or break when forces are applied. Bending results when an object stretches in tension on one side and squeezes together in compression on the other side.

15 Thermal expansion As the temperature increases, the kinetic energy in vibration of the atoms and molecules also increases. The increased vibration makes each particles take up a little more space, resulting in thermal expansion. The coefficient of thermal expansion describes how much a material expands for each degree change in temperature.

16 The thermal expansion coefficient works in both ways.
If the temperature decreases, objects contract. Very large stresses can develop if objects are prevented from expanding or contraction with temperature.

17 8.1 Section Review 1. Name one example of a physical change and one example of a chemical change. 2. Aluminum has a density of 2,700 kg/m3. What is the mass if a cube of aluminum that measures 2.5 cm (.025m) on each side? A man weighing 800 N is hanging from a 2mm diameter titanium wire with a cross – section of 3 x m2. Will the wire break?

18 Name one example of material for each set of properties:
High elasticity and high tensile strength. Amorphous and brittle. Crystalline and brittle. Crystalline and elastic.

19 Vocabulary Fluid Buoyancy Archimedes’ Prinicple Pressure
Bernoulli’s Principle Viscosity

20 Objectives Explain why liquids are generally less dense than solids.
Explain why solid water is less dense than liquid water. Describe the conditions necessary for an object to float. Explain what pressure is. Describe how energy conservation applies to fluids. Explain the meaning of viscosity.

21 8.2: Fluids A fluid is described as any matter that flows when force is applied. Liquids and gases are both forms of fluids. Size and shape do not change a material’s density. The density of a liquid is the ratio of mass to volume, just like the density of a solid. Atoms in liquid form tend to take up more space. Atoms in a liquid are less rigidly organized.

22 The arrangement of atoms in liquid form take up more space than the arrangement of atoms in solid form. The density of silver is lower in its liquid state. The density of most solids decreases slightly as temperature increases because solids expand when heated. Water is less dense in solid form As water freezes, molecules separate from each other because of the honeycomb structure. Volume increases, mass stays the same.

23 Buoyancy Buoyancy is a measure of the upward force a fluid exerts on an object that is immersed. Archimedes’ principle states that the buoyancy force is equal to the weight of a fluid displaced by an object. An object floats if the buoyant force is greater than its weight. If the buoyant force is less the object will sink. Neutral buoyancy occurs when the buoyant force is equal to the weight of an object.

24 Buoyancy forces are created by differences in density.
An object with a density greater than 1,000 kg/m3 sinks because the weight of water displaced is less than the weight of the object. An object with a density less than 1,000 kg/m3 floats because the weight of the water displaced is more than the weight of the object.

25

26 Pressure A force applied to a fluid creates pressure instead of stress. Pressure is a ration of force per unit area. The idea of pressure helps explain how fluids move and how they act on surfaces. The metric unit of pressure is the pascal (Pa). The English unit of pressure is pounds per square inch (psi). One psi means one pound of force per square inch of area (lb/in2)

27 Gravity creates pressure because fluids have weight.
The pressure increases the deeper you go beneath the surface of the ocean because the weight of the water above you increases with depth.

28 Pressure, energy and force
On the atomic level, pressure comes from collisions between atoms and molecules. Molecules move around and bounce off one another. Pressure exerts force on any surface touching a fluid. The force is the pressure multiplied by the area of contact. Differences in pressure create potential energy in fluids.

29 Energy Conservation and Bernoulli’s Principle
Bernoulli’s principle states that if friction is neglected, the total energy stays constant for any particular sample of fluid. Streamlines are imaginary lines drawn to show the flow of fluid. Bernoulli’s principle says the three variables of height, pressure and speed are related by energy conservation.

30 Height is associated with potential energy
Speed is associated with kinetic energy. Pressure is associated with pressure energy. If one variable increases along the streamline, at least one of the other two must decrease. If the KE is 0 (fluid at rest) then Bernoulli’s principle gives us the relation between pressure and depth. A bit of fluid that is low (deep) has higher pressure than one that is high (near the surface) Ex. Airfoil shape

31 Viscosity Viscosity is the property of fluids that causes friction.
Viscosity is an important property of motor oils. Viscosity is determined by the shape and size of the particles in a liquid. As a liquid gets warmer is viscosity decreases.


Download ppt "Physical Properties of Matter"

Similar presentations


Ads by Google