1. “Implementation of a RC5 block cipher algorithm and implementing an attack on it” Cryptography Team Presentation 1

2. About RC5 ◦ Fast symmetric block cipher ◦ Same key for encryption and decryption ◦ Plaintext and ciphertext are fixed-length bit sequences (blocks)

3. Parameters of RC5 ◦ RC5 – w/r/b  E.g. RC5 – 32/16/10 ◦ w = 32 bits ◦ r = 16 rounds ◦ b = 10-byte (80-bit) secret key variable ◦ t = 2 (r + 1) = 2 (16 + 1) = 34 rounds

4. Important parameters in details “w”(bits) – variable word size  Allowable choice for “w” in RC5– 16,32 and 64  Suggested 32  “Two” word input (plaintext) block size – 64-bit plaintext  “Two” word output (ciphertext) block size – 64-bit ciphertext  Design accepts all w > 0  Variable word size can exploit longer word length of processors like 64 – bit processors.

5. Important parameters in details “r” – variable number of rounds  Tradeoff between high speed and high security.  Allowed values 0-255  Suggested – 12  Higher the number of rounds provides increased level of security.  “S” – Expanded key table – derived from user’s secret key.  “t” – The size of table “S” (depends on “r”) ◦ t = 2 ( r + 1 ) words.

6. Important parameters in details “b” – variable length secret cryptographic key ◦ The number of bytes in the secret key K. ◦ 16 bytes suggested with allowed values from 0 – 255 “K” – The b-byte secret key : K[0], K[1],..., K[b-1].

7. Discussion on parameters RC5 cannot be secure for all possible values ◦ r = 0  No rounds of security will provide no encryption ◦ r = 1  One round will provide very less security  As a matter of fact, it can be easily broken ◦ b = 0  No key, no security ◦ Maximum allowable parameter values will be overkill. ◦ Nominal Choice Proposed  RC5 – 32/12/16

8. Notation and RC5 Primitive Ops Three Primitive operations(and their inverses) ◦ Two’s complement addition of words, modulo 2 w  ‘+’  Inverse op, subtraction, ‘-’ ◦ Bit-wise exclusive OR of words, denoted by ⊕ ◦ A left-rotation of words  x <<< y, cyclic rotation of word x left by y bits  One word of the intermediate results is cyclically rotated by an amount determined bits of another intermediate results.  The inverse operation is right-rotation, x>>>y

9. Note We see that rotations are ‘rotations by variable amount’ that is plaintext dependent We know that on modern microprocessors, a variable rotation takes constant-time ◦ Time is independent of the rotation amount y No other non-linear operations in RC5 Strength,therefore, relies on data-dependent rotations

10. RC5 Algorithm Three parts:- ◦ Key Expansion ◦ Encryption Algorithm ◦ Decryption Algorithm

11. RC5 Algorithm – Key Expansion Requirements of key expansion ◦ Filling the expanded key table array S[0…t – 1] with random binary words  “t” – Size of table “S” => 2 ( r+1 ) ◦ S table is not an “S-box” like DES.  Entries in S sequentially, one at a time. ◦ Random binary words are derived from the K.

12. RC5 Algorithm – Key Expansion Starting with two magic constants ◦ Two word-sized binary constants ◦ P w = Odd((e - 2) 2 w ) ◦ Q w = Odd((φ – 1) 2 w )  e = 2.718281828459… (base of natural logarithms)  Φ = 1.618033988749… (golden ratio), ◦ Where, Odd(x) is the odd integer nearest to x ◦ For w = 16 and 32 in hexadecimal form  P16 = b7e1  Q16 = 9e37  P32 = b7e15163  Q32 = 9e3779b9

13. RC5 Algorithm – Key Expansion Converting the Secret Key from Bytes to Words ◦ c = ceiling(b/u) words ◦ Pseudo code for conversion:- Image Source: http://people.csail.mit.edu/rivest/Rivest-rc5rev.pdfhttp://people.csail.mit.edu/rivest/Rivest-rc5rev.pdf

14. RC5 Algorithm – Key Expansion Initializing the S Array ◦ Initialization to a particular fixed(key- independent) Image Source: http://people.csail.mit.edu/rivest/Rivest-rc5rev.pdfhttp://people.csail.mit.edu/rivest/Rivest-rc5rev.pdf

15. RC5 Algorithm – Key Expansion Mixing in the Secret Key ◦ Pseudo code:- Image Source: http://people.csail.mit.edu/rivest/Rivest-rc5rev.pdfhttp://people.csail.mit.edu/rivest/Rivest-rc5rev.pdf

16. RC5 Algorithm Encryption Algorithm ◦ Two w-bit words are denoted as A and B A = A + S[0]; B = B + S[1]; for i = 1 to r do A = (( A ⊕ B ) <<< B ) + S[ 2 * i ]; B = (( B ⊕ A) <<< A ) + S[ 2 * i + 1]; The output is in the registers A and B. Work is done on both A and B, unlike DES where only half input is updated. Image Source: http://en.wikipedia.org/wiki/File:RC5_InfoBox_Diagram.svghttp://en.wikipedia.org/wiki/File:RC5_InfoBox_Diagram.svg

17. RC5 Algorithm Decryption Algorithm ◦ (easily derived from encryption) ◦ Two w-bit words are denoted as A and B for i = r downto 1 do B = (( B – S[ 2 * i + 1 ]) >>> A) ⊕ A; A = (( A – S[ 2 * i ] >>> B) ⊕ B; B = B - S[1]; A = A - S[0]; The output is in the registers A and B.

18. Important Notes Data dependent rotations – amount of rotation is not pre-determined. The behavior of each round is different as the rotation amount is different. ◦ Each round ends by adding expanded key from S It was experimentally [1] determined that after eight rounds in RC5-32, each message bit affected some rotation amount. [1]: Rivest, R. L. (1994). "The RC5 Encryption Algorithm" (pdf). Proceedings of the Second International Workshop on Fast Software Encryption (FSE) 1994e. pp. 86–96.

19. Next Presentation Differential Attack will be performed. ◦ Difficult because bits are rotated to “random” positions in each round. Analysis of the requirements of the attack. Analysis of the results of the attack.

20. References Rivest, R. L. (1994). "The RC5 Encryption Algorithm" (pdf). Proceedings of the Second International Workshop on Fast Software Encryption (FSE) 1994e. pp. 86–96. http://people.csail.mit.edu/rivest/Rivest-rc5rev.pdf http://people.csail.mit.edu/rivest/Rivest-rc5rev.pdf RC5 Encryption Diagram ◦ http://en.wikipedia.org/wiki/File:RC5_InfoBox_Diagram.svg http://en.wikipedia.org/wiki/File:RC5_InfoBox_Diagram.svg ◦ http://en.wikipedia.org/wiki/RC5 http://en.wikipedia.org/wiki/RC5