1. Modeling Process - Shoe mold - 08 OCT 2004 Inustechnology,Inc.

2. 1. Scandata 2. Defeaturing about detail shape 3. Create Basic Solid from Bounding Box

3. 4.Create loft surface - create curve by “fit boundary curve” - project curve to Ref.Plane on bottom - project curve to Ref.Plane on Top 5.Cut by surface

4. 6.Create loft surface on top - create curve by ”interpolate”on top surface - project curve to Ref.Plane on front - project curve to Ref.Plane on rear 7.Create loft surface on middle - create curve by ”interpolate”on middle surface - project curve to Ref.Plane on front - project curve to Ref.Plane on rear 8.Separate solid by surface - duplicate this solid - cut one solid by surface - reverse the normal of surface - cut another one by surface

5. 9.Cut by surface - create untrimmed surface by polygon fitting - extend the surface - apply “cut by surface” 10.Cut by surface - create untrimmed surface by polygon fitting - extend the surface - apply “cut by surface” 11.Cut by surface - create curve by “interpolate”on side - project curve to Ref.Plane on bottom - project curve to Ref.Plane on Top

6. 12.Cut by surface - Select face - add feature region - create surface by picking the feature region - cut by surface 13.Union solids

7. 14.Create small bump - create interpolate curve - project the curve on surface - create circle at the end of the curve - apply sweep surfacing (piping) - close both end of the surface like pipe - create solid - union this solid with previous one 15. Final Result