1. 1 DISCOVERING DESIGNING SUPPORTING BUILDING MY BRAND DESIGNING WITH MY BRAND 2020 TRAINING

2. 2 DESIGNING MY BRAND THOMASVILLE’S PREDESIGNED SOLUTIONS

3. 3 DESIGNING MY BRAND PreDesigned Moulding Stacks 3 2 Step 1: In Drag and Drop, Click Through: Mouldings, Top Mouldings (or Bottom Mouldings for light rail), Stacked Mouldings, Select the desired Stack. Step 2: Highlight the chosen Stack. 1 4 Step 3: Drag the stack and drop it on a Wall Cabinet. Step 4: Select which wall cabinet you want to place the stack on from the menu provided.

4. 4 DESIGNING MY BRAND PreDesigned Moulding Stacks: Installation Instructions 2 Step 1: In Drag and Drop, Click Through: Mouldings, Top Mouldings, Stacked Mouldings, Select the desired Stack. Step 2: Highlight the chosen Stack. Step 3: Right Click on the desired Stack. Step 4: Select SPECS from the menu provided. Step 5: When the screen appears with the instructions, press PRINT at the top to print. 1 4 5

5. 5 DESIGNING MY BRAND Placing PreDesigned Hearth Hood Kits Placing Hearth Kits from Drag and Drop: Step 1: Double Click on Walls. Step 2: Double Click on Range Hoods. Step 3: Double Click on Hearth Hood Kits (choose height option). Step 4: Double Click on Hearth Kit (choose desired width). Step 5: Drag and Drop the Hearth Kit into the design. Step 6: The Ask Attachment screen will pop up and allow you to choose any desired attachments, when complete, click Place. 4 1+1+ 6

6. 6 DESIGNING MY BRAND PreDesigned Islands 1 3 2 4 5 Step 1: In Drag and Drop select BASE.. Step 2: Select OPEN and SPECIALTY. Step 3: Select ISLANDS. Step 4: Click on island choice. Step 5: Drag desired island to floor plan.

7. 7 DESIGNING MY BRAND Attaching PreDesigned Split Turnings 1 2 8 Step 1: Right Click on desired cabinet. Step 2: Select ATTRIBUTES. Step 3: Open the ATTACHMENTS tab. Step 4: Click on ADD. Step 5: Select EXTERNAL ITEMS. Step 6: Select Split Turning Kits. Step 7: Select desired style/finish. Step 8: Click on PLACE. 3 4 5 6 7

8. 8 DESIGNING MY BRAND PreDesigned Shelf/Mantle Kits 1 32 4 6 Step 1: Select Office/Furniture/Entertainment. Step 2: Select Additional Items. Step 3: Select Mantles and Shelf Kits with Corbels. Step 4: Select desired style and size. Step 5: Drag onto wall/floor plan. Step 6: Create desired width by dragging from left to right. 5 A B C To View Spec Information: Step A: Right click on kit in drag and drop. Step B: Select SPECS. Step C: Specs will pop up on screen.

9. 9 DESIGNING MY BRAND NAVIGATING THE THOMASVILLE CATALOG

10. 10 DESIGNING MY BRAND Attaching Decorative Inserts 1 3 2 Step 1: Highlight the wall cabinet that you wish to add a decorative (Art glass, Textured glass, or panel insert) insert to. Step 2: Type the nomenclature of the chosen insert into the quick search box. Step 3: Double click on the appropriate size range to fit your chosen cabinet and it will attach itself to the highlighted cabinet. Step 4: To view, simply create a rendering of your design and your insert graphics will appear. 4

11. 11 DESIGNING MY BRAND Attaching Matching Interior 1 3 2 Step 1: Type OS into the QuickSearch box. Step 2: Highlight the OS option in the Drag and Drop menu. Step 3: Drag it onto the wall cabinet. -or- Step 4: Highlight the wall cabinet you want to add matching interior to, and double click the first OS option. 4

12. 12 DESIGNING MY BRAND Drag and Drop Menu: Attaching Modifications 1 3 2 4 Step 1: Type the Modification Code into the Quick Search Box (located below Drag and Drop). Step 2: Highlight the correct modification. Step 3: Drag the modification over the desired cabinet and release the mouse. Step 4: Right Click on the cabinet to make sure the modification took. Step 5: Type in any modification code in the Quick Search Box to add to cabinets on your floor plan. REMEMBER: You must familiarize yourself with all nomenclature to use the Quick Search features and your speed will be greatly increased!

13. 13 DESIGNING MY BRAND Modification Codes IMPORTANT: VERIFY MODIFICATION AVAILIBILITY IN THE SPEC BOOK! Here is a list of Quick Codes for Modifications: NOTE: 2020 WILL LIST SOME MODS MULTIPLE TIMES; LOOK FOR A LETTER AT THE END (“B” –BASE; “W” –WALL; “T’-TALL) TO DETERMINE THE APPLICABLE CABINET GROUP

14. 14 DESIGNING MY BRAND Viewing Spec Information 1 3 2 Step 1: Type nomenclature of cabinet in question into the QuickSearch box. Step 2: Right click on the chosen cabinet. Step 3: Select SPECS Step 4: A Spec page with the information on that cabinet will pop up on the screen. 4

15. 15 DESIGNING MY BRAND Placing Horizontal Tall End Panels 1 3 2 4 Step 1: Select Office/Furniture/Entertainment. Step 2: Select Horiz. Tall End Panels. Step 3: Select desired size and material. Step 4: Place into design as a counter top, shelving, etc. Step 5: Create desired width by dragging from left to right. 5

16. 16 DESIGNING MY BRAND Placing Horizontal Box Column Fillers 1 3 2 5 Step 1: Select Office/Furniture/Entertainment. Step 2: Select Furniture Shelf. Step 3: Select Horiz. Box Column Fillers. Step 4: Select desired size and profile. Step 5: Place into design. Step 6: Create desired width by dragging from left to right. 6 4

17. 17 DESIGNING MY BRAND Thomasville Parts Catalog Step 1: Open TV Catalog. Step 2: Select Replacement Parts. Step 3: Find desired cabinet. Step 4: Select the part you need by clicking and dragging it into your design. Step 5: Attach any necessary mods. A.Type mod. in QuickSearch B.Select correct mod. C.Drag mod. onto part NOTE: Everything you wish to insert from the parts catalog must be added into the floorplan or NON-Planned Graphics Items tab. 1 4 5 3 A B C

18. 18 DESIGNING MY BRAND Viewing Door/Drawer Front Size Charts Step 1: Open TV Catalog. Step 2: Select Replacement Parts. Step 3: Type.B30 in QuickSearch box. Step 4: Right click on R.DOOR (right door). or Step 4: Right click on TOP.DF ( drawer front). Step 5: Select SPECS. Step 6: Door or drawer front size chart will pop up on screen. 1 4 5 3 2 6

19. 19 DESIGNING MY BRAND Placing Panels: Back of an Island 1 3 2 4 5 Step 1: Double Click through Base, Panels, Back Panels (Wood), Cross Grain Veneer Back Panel (BP9634.5CRSGR for standard height; 9648 for raised bars OR V-Groove (BP4834.5VG for standard height; 4896 for raised bars). RECOMMENDED FOR USE WITH GLAZE FINISHES. Step 2: Drag the selected panel over the desired wall and release the mouse. Step 3: Left click again on the LEFT SIDE of the placement zone (left as you stand facing it) and release. Step 4: Drag the cursor along the length of the wall to size the panel. Step 5: Left click again to finish. (Dragging right to left will leave the panel too short).

20. 20 DESIGNING MY BRAND Placing Decorative Doors: Back of an Island 1 3 2 Step 1: Double Click through Base, Panels, Door Only for Back Panel. Step 2: Highlight the correct doors size. Step 3: Drag and Drop the door onto the back panel. ALWAYS PLACE DOORS FROM LEFT TO RIGHT. Step 4: Use this method to place additional doors if necessary.

21. 21 DESIGNING MY BRAND Placing Decorative Doors: Sides of Cabinets 1 3 2 Step 1: Double Click through Base, Panels, Decorative Door End Panel Kits (includes ¼” skins, decorative doors and mounting screws). For Wall: Wall, Panels, Decorative Door End Panel Kits For Tall: Tall, Panels, Decorative Door End Panel Kits Step 2: Highlight the door that fits the placement (right/left side of the cabinet) and size required. Step 3: Drag and Drop the Decorative Door Kits onto the side of the cabinet. TED WED BED

22. 22 DESIGNING MY BRAND Placing Authentic Ends 3 2 Step 2: Select Attributes from the menu. Step 3: Click on the ATTACHEMENTS tab. Step 4: Click on ADD. Step 5: Click on Construction Modifications. Step 6: Click on Authentic Ends. Step 7: Select right or left side. Step 8: Click on APPLY. 14 5 6 7 8 Step 1: Right Click on the cabinet that you wish to upgrade to AE.

23. 23 DESIGNING MY BRAND Placing Appliance Panels 3 2 Step 1: Remove all appliances that are going to be receiving decorative panels. Step 2: Refrigerators: Click through: Tall, Panels, Refrigerator Door Panels, Selected Option, located correct size and configuration. Dishwashers: Click through: Base, Panels, Dishwasher Door Panels, Selected Option Step 3: Drag and Drop the APP Panel into the spot where the appliance should be. Step 4: If necessary, right click on the APP Panel and go into the attributes to modify the size so it will fit into the allotted space. NOTE: THIS TIP IS FOR RENDERING PURPOSES ONLY. DELETE THESE ITEMS BEFORE CLOSING SALE. 1 4 5 Step 5: Create the rendering to show the customer the Custom Appliance Panels. REMEMBER: These will not price out correctly and are only for rendering purposes. Step 6: DELETE unnecessary panels. Step 7: Order all Appliance Panels as ACCESSORIES.

24. 24 DESIGNING MY BRAND Ordering & Pricing Appliance Panels 3 2 Step 1: Fill out the correct APP form in the Thomasville Specifications Guide. Step 2: Open Accessories and Extra Costs. Step 3: Click through: Accessories, Appliance Panels, Selected appliance type and Option#. Step 4: Drag and Drop the APP Panel into the Accessories and Extra Costs worksheet. Step 5: In the Quantity Box, type in the number of Square Feet calculated on the APP Form. Step 6: Set Door Styles and Pricing. NOTE: THIS TIP IS FOR PRICING PURPOSES ONLY AND WILL NOT SHOW UP GRAPHICALLY. 4 5

25. 25 DESIGNING MY BRAND Printing Appliance Panels Forms 1 3 2 Step 1: In Drag and Drop, select TALL. Step 2: Select PANELS. Step 3: Select REFIRGERATOR DOOR PANELS. Step 4: Select desired OPTION # (1-4). Step 5: Right Click on appropriate configuration or model. Step 6: Select SPECS. Step 7: Select PRINT. 4 5 6 7

26. 26 DESIGNING MY BRAND Using Horizontal Fillers with Decorative Overlays: As a Valance 3 2 Step 1: Open up an Elevation View of the wall where the Horizontal Filler will be placed. Step 2: Click Through: Walls, Valance, Horizontal Fillers. Step 3: From Drag and Drop, drag the filler to the first cabinet that it will attach to (ALWAYS WORK LEFT TO RIGHT). Step 4: Left Click to Place the filler against the cabinet. Step 5: In Ask Attachment pop up menu, select desired overlay, and click PLACE. Step 6: Size the filler width by dragging it to the second cabinet that it will stretch towards. Step 7: Left Click to Place the filler. 4 6 1 5

27. 27 DESIGNING MY BRAND Using Horizontal Fillers: As Moulding 3 2 Step 1: Open up an Elevation View of the design. Step 2: Click Through: Mouldings, Top Mouldings, Find the filler that you need (ex. TF696FH). Step 3: From Drag and Drop, drag the filler to the top of your wall cabinets. Step 4: Stack additional mouldings on top of filler if desired. 1

28. 28 DESIGNING MY BRAND Placing 135 o Fillers 3 2 Step 1: In the Drag & Drop Menu, Click Through: Base Corner, 135 o Fillers. Step 2: Select the appropriate 2XF330 (Use the first 2XF330 if there are no adjacent cabinets, use the second 2XF330 if the adjacent cabinets are already in place). 1 Step 3: From Drag and Drop, drag the filler to the 135 o angle.

29. 29 DESIGNING MY BRAND 20/20 Tips, Tricks & Helpful Hints

30. 30 DESIGNING MY BRAND Switching Suppliers 4 3 Automatically Switch Items: Step 1: Open the current design that you wish to price in another vendor. Step 2: Click on EDIT and select SWITCH ITEMS. Step 3: Select the catalog that the design was built with. Step 4: Select the catalog that you wish to switch to. Step 5: Click the AUTOMATIC button. Step 6: Click OK in the box that warns you not all items were able to switch. 2 5 6 NOTE: Always remember to delete catalog settings (doorstyle, finish, etc), appliances & mouldings prior to switching catalogs.

31. 31 DESIGNING MY BRAND Switching Suppliers 4 1 Manually Switch Items: Step 1: Highlight an item from the “Currently Used” column. Step 2: Find the equal item on the “Available Catalog” column. Step 3: Click the MANUAL button. Step 4: Repeat steps 1-3 until all items have been switched over to the new supplier. Step 5: Click the APPLY and OK buttons. Step 6: Select Catalog Options: Door, Wood, Finish, Upgrades… 2 6 3 5

32. 32 DESIGNING MY BRAND Drag and Drop Menu: Placing Cabinets 1 3 2 Step 1: Highlight the cabinet to the left of the one you are about to place. Step 2: Locate the next cabinet in the Drag and Drop menu. Step 3: DOUBLE CLICK on the new cabinet to place it to the right of the highlighted cabinet. Step 4: Place additional cabinets as detailed in step 4. REMEMBER: 2020 naturally wants to place items in the floor plan from left to right. Items are placed to the right of any highlighted cabinet as long there is sufficient space remaining and you are not turning a corner. If it doesn’t work it usually means you’re double clicking on a category, not a cabinet. 4

33. 33 DESIGNING MY BRAND Drag and Drop Menu: Replace Feature 1 3 2 4 5 Step 1: Highlight the cabinet you wish to replace by left clicking on it-it will be surrounded by a blue dotted line when highlighted. Step 2: Go to the Drag and Drop menu and locate the cabinet you wish to replace the old one with. Step 3: RIGHT click on the new cabinet nomenclature in Drag and Drop. Step 4: Select Replace from the menu options. Step 5: The new cabinet will take the place of the old one in your design. REMEMBER: Replace will NOT work if there is insufficient space to the right of the existing cabinet for its replacement and will NOT turn corners. If you need to replace multiple cabinets at one time, select the first one, then hold down CONTROL and select the others. Then follow steps 3-5.

34. 34 DESIGNING MY BRAND Showing the Sink Base Code Step 1: Right click the open Grid Area. Step 2: Select Display Settings. Step 3: Highlight Attachments (Sinks…). Step 4: Change the Fill to Transparent. Step 5: Apply the Change & choose OK.

35. 35 DESIGNING MY BRAND Placing Base Board Moulding: On a Wall 1 3 2 Step 1: Double Click through Moulding, Other Moulding, Wall Moulding, BBM8. Step 2: Drag the BBM8 over the desired wall and release the mouse. Step 3: Right Click on the BBM8 and select Up/Down from the menu options. Step 4: Lower the moulding to 0” off the ground for Base Boards or x” off the ground for wall moulding. Step 5: Right Click on the BBM8 and select Edit Shape from the menu options and remove any unnecessary BBM8 (it will often line the wall behind cabinets). 4 5

36. 36 DESIGNING MY BRAND Placing Vaulted Ceilings 1 32 5 Step 1: Open up the ROOM catalog in the Drag and Drop Menu. Step 2: Click through: Decorative Items, Wall/Ceiling, and select a wall (most common is TC.Wall/Ceiling). Step 3: Left click and drag the TC.Wall/Ceiling to the placement zone of the wall with the angled ceiling. Step 4: Left click near the wall to set the TC.Wall/Ceiling. Step 5: Use your mouse to slightly extend the width of the TC.Wall/Ceiling (see below) and left click to place. Step 6: Right Click on the TC.Wall/Ceiling and select Drag from the menu options. Step 7: Drag the wall as far left to the end of the wall as possible. 7 6

37. 37 DESIGNING MY BRAND Placing Vaulted Ceilings 8 9 11 12 Step 8: Right Click on the TC.Wall/Ceiling and select Resize Width from the menu options. Step 9: Drag the wall as far right to the end of the wall as possible. Step 10: Right Click on the TC.Wall/Ceiling and select Attributes from the menu options. Step 11: In the Dimensions tab change Depth (2) to the width of the room plus the thickness of the wall so the TC.Wall/Ceiling covers the entire room. Step 12: In the Dimensions tab change Width (2) to reflect the highest point in the ceiling: When looking at the wall, if your low end is to the right: set the Width (2) measurement to 0”. If the low end of the wall is on the left side make the dimension in Width (2) the same as the TC-Wall/Ceiling). Step 13: Click Apply – OK. 10

38. 38 DESIGNING MY BRAND Placing Vaulted Ceilings 1 32 5 Step 1: Open up the ROOM catalog in the Drag and Drop Menu. Step 2: Click through: Decorative Items, Wall/Ceiling, and select a wall (most common is TC.Wall/Ceiling). Step 3: Left click and drag the TC.Wall/Ceiling to the placement zone of the wall with the angled ceiling. Step 4: Left click near the wall to set the TC.Wall/Ceiling. Step 5: Use your mouse to slightly extend the width of the TC.Wall/Ceiling (see below) and left click to place. Step 6: Right Click on the TC.Wall/Ceiling and select Drag from the menu options. Step 7: Drag the wall as far left to the end of the wall as possible. 7 6

39. 39 DESIGNING MY BRAND Placing Vaulted Ceilings 8 9 11 12 Step 8: Right Click on the TC.Wall/Ceiling and select Resize Width from the menu options. Step 9: Drag the wall as far right to the end of the wall as possible. Step 10: Right Click on the TC.Wall/Ceiling and select Attributes from the menu options. Step 11: In the Dimensions tab change Depth (2) to the width of the room plus the thickness of the wall so the TC.Wall/Ceiling covers the entire room. Step 12: In the Dimensions tab change Width (2) to reflect the highest point in the ceiling: When looking at the wall, if your low end is to the right: set the Width (2) measurement to 0”. If the low end of the wall is on the left side make the dimension in Width (2) the same as the TC-Wall/Ceiling). Step 13: Click Apply – OK. 10

40. 40 DESIGNING MY BRAND Creating Collinear Walls 1 3 2 7 4 Step 1: Draw in Wall 1and set the length (ALWAYS use the Edit box to type in dimensions). Step 2: Draw in Wall 2 and set the length. Step 3: Draw in Wall 3, set the length and set the angle at 180. Step 4: Draw in Wall 4, set the length and set the angle at 180. Step 5: Continue drawing remaining walls. Step 6: Hit ECS when all walls are in place to set the walls. Step 7: Right click on a wall and select Properties from the menu. Step 8: Highlight the wall that is to be a different height than the surrounding walls. Step 9: Set that wall at desired height. Step 10: Click APPLY and OK. 9 8

41. 41 DESIGNING MY BRAND Setting Cabinets at a 45 0 Angle 3 5 Step 1: From the Drag and Drop Menu, drag the desired cabinet into the corner space. Step 2: Release the cabinet when you see the double horseshoe magnet. Step 3: In the Edit box, type in 0 for the OUT dimension. Step 4: Hit ENTER on your keyboard. Step 5: Continue placing adjacent cabinets. 1

42. 42 DESIGNING MY BRAND Editing C-Tops Around Wall Jogs 3 2 4 Step 1: Open Design, Countertops and Trims Menu. Step 2: Place a checkmark by Countertops, select the Square Foot Top and click on DESIGN. Step 3: Right Click on the countertop and select EDIT SHAPE from the menu. Step 4: Right click on the countertop to the right of the wall jog. Step 5: Select EXTRUDE from the menu. Step 6: Drag the extrusion the length and the width that will allow the countertop to surround the chase and not intersect it. 5 6

43. 43 DESIGNING MY BRAND Editing C-Tops Around Wall Jogs 7 9 8 10 11 Step 7: While in EDIT SHAPE mode, right click on the point between each base cabinet adjacent to the corner cabinet and delete the points. Step 8: Add a point to the countertop in center of the B36 in the corner (THIS IS USED AS A REFERENCE POINT). Step 9: Drag the new point into the corner of the walls. Step 10: Delete the points adjacent to the corner point. Step 11: Click on the green checkmark to save the changes.

44. 44 DESIGNING MY BRAND Editing C-Tops Around Wall Jogs

45. 45 DESIGNING MY BRAND Placing, Saving and Using Notes Adding Notes 1.Select Notes from the Task Bar at the top of the screen. 2.Left click on Add Notes. A text box will appear with your cursor as you drag it over the grid. 3.Position the text box on the floor plan. Left click. 4.Type the note in the Add/Edit Note text box. 5.Touch the Tab key and the Tag Number is activated. The Tag Number references the note. 6.Click on OK. The note appears on the floor plan. Saving Notes 1.Follow steps 1-4 from above 2.Click on Save. 3.Name your file and click on Save. The note saves to My Documents KIT folder and has a.txt suffix. 4.Click OK on the Add/Edit Note screen. Editing Notes The note can be edited by right clicking on the actual note on the floor plan. Add Tag: Allows an additional tag to place if a tag number has already been assigned. Move: Allows the note to be placed vertically or on an angle. Rotate: Allows the note to be placed vertically or on an angle. Delete Notes & Tag(s): Will delete off the floor plan only. Edit: Takes you to the Add/Edit Notes screen so the note can be modified. Retrieving Saved Notes 1.Select Notes from the task bar and click on Add Note. 2.Place the text box on the floor plan. 3.Click on Open to access the saved notes. 4.Double click the note you need and click on Open. 5.Click OK in the Add/Edit note box. This will place the note on the floor plan. Drawing Reference Lines 1.Click Notes on the menu bar and choose a Add Line. 2.On the floor plan, left click near the note and move the mouse to the respective item. 3.Left click twice to set. Note: Tag numbers allow designers to provide specific information. Adding lines allows designers to identify specific parts, unique options, etc.

46. 46 DESIGNING MY BRAND Design Applications

47. 47 DESIGNING MY BRAND Creating Island Files Create multiple islands in a common Island File. It will assist with Time Management. Use islands found in Literature, Displays, and old Customer Files. Copy and Paste Islands Between Files: Step 1: Choose the Select Region Icon. Step 2: Draw a Box around the desired Island. Step 3: Right click the Island and choose copy. Step 4: Open the file in which the island will be placed. Step 5: Choose Edit and Paste. Step 6: Move your cursor to the desired location and left click to drop the island. 1 2 3 5 6

48. 48 DESIGNING MY BRAND Questions? Thomasville 20/20 Helpline 1-866-622-4457