1. SoundCard Packet Radio Amateur Radio Club ITB YB1ZX

2. References zhttp://home.pages.de/~flexnet/ zhttp://www.afthd.tu- darmstadt.de/~flexnet/index.html zftp://ftp.afthd.tu- darmstadt.de/pub/flexnet/3.3g/

3. What is Flexnet? zPC based packet radio zUse SoundCard as modem! zRun on Windows95 / 98. zWritten by Gunter Jost, DK7WJ from Flexnet Gruppe Darmstadt, Germany. zHttp://home.pages.de/~flexnet/

5. Devices drive by Flexnet zBaycom Modem 1200bps AFSK zBaycom Modem 9600bps FSK zTNC2 with 6PACK EPROM zSCC Modem Card zSoundCard modem (PSA Chipset, SB / ESS). zEtc..

6. Preparation

7. Minimum Hardware Req’d zPC 486 DX2 znon-PnP SoundCard compatible with SoundBlaster & WSS. zRadio Transceiver (VHF / UHF). zPTT Circuit

8. Minimum Software Req’d zWindows95 zPC/Flexnet with SoundCard modem driver.

9. Where to get it? zhttp://www.afthd.tu- darmstadt.de/~flexnet/index.html zftp://ftp.afthd.tu- darmstadt.de/pub/flexnet/3.3g/

10. Instalation

11. System

12. Profile

13. SC

16. config.sys

17. During Bootup U’ll see..

18. PTT Circuits

19. Via COM Port

20. Via Printer Port

21. Via Game Port

23. Instalation Test

24. During Win95 Startup..

25. FlexNet Tools zTrace zParameter zAX.25 routes zAX.25 tree view zIP routes

27. FlexNet Parameter

28. FlexNet AX.25 Routes

29. FlexNet AX.25 Route Tree

30. Diagnostics

31. zShell to DOS zrun SMDIAG.EXE from FlexNet directory

34. Check Link Layer..

35. Check AX.25 Connection zBCT.EXE z[Esc] (C)onnect

38. TCP/IP Setup..

39. TCP/IP Setup zControl Panel -> Network -> Add -> Adapter -> Have Disk zClick “Browse” -> FlexNet Directory zFlexNet IP -> AX.25 zClick “OK” zControl Panel -> Network -> Add -> Protocol -> Microsoft -> TCP/IP

40. Net Setup

41. Add Adapter

42. Browse FlexNet disk/folder

43. IP Setup

44. Gate Setup

45. DNS

46. IP Route

47. Check InterNet Route

48. zC:\WINDOWS>ping

51. Ready to go..

52. Internet Application zMicrosoft Mail zEudora zPegasus Mail zall Internet application teoritically can be used … but it is slow through radio..

53. Thank you