Presentation is loading. Please wait.

Presentation is loading. Please wait.

ALIGNMENT OF 3D ARTICULATE SHAPES. Articulated registration Input: Two or more 3d point clouds (possibly with connectivity information) of an articulated.

Similar presentations


Presentation on theme: "ALIGNMENT OF 3D ARTICULATE SHAPES. Articulated registration Input: Two or more 3d point clouds (possibly with connectivity information) of an articulated."— Presentation transcript:

1 ALIGNMENT OF 3D ARTICULATE SHAPES

2 Articulated registration Input: Two or more 3d point clouds (possibly with connectivity information) of an articulated object, possibly under different poses. Goal: Appropriately align all these point clouds together

3 Papers Automatic Registration for Articulated Shapes Global Registration of Dynamic Range Scans for Articulated Model Reconstruction KinectAvatar: Fully Automatic Body Capture Using a Single Kinect

4 Automatic Registration for Articulated Shapes Pipeline

5 Feature Pre-compute per-vertex coordinate frames and feature descriptors (spin image) Coordinate Frames (local coordinate system)

6 Spin Image

7

8 “Spin” – Radial Symmetry

9 Spin Image for articulated shape Localized to small neighborhoods

10 Feature Matching: match spin images mu is the median of the upper half of the measurements, ml is the median of the lower half of the measurements, fs = mu − ml

11 Motions sampling for each correspondence candidate ( p,u ) Where R and t are from the computed coordinate frames

12 Motion clustering Mode finding on Lie Groups: mean shift Mean shift [1,2] Kernel Density Estimation Move along the gradient of the kernel function [1] Y. Cheng, “Mean shift, mode seeking, and clustering,” IEEE TPAMI., vol. 17, no. 8, pp. 790 –799, aug 1995. [2] D. Comaniciu and P. Meer, “Mean shift: a robust approach toward feature space analysis,” IEEE TPAMI,vol. 24, no. 5, pp. 603 –619, may 2002

13 Mean shift on Lie Groups O. Tuzel, R. Subbarao, and P. Meer, “Simultaneous multiple 3d motion estimation via mode finding on lie groups,” in Int. Conf. on Comput. Vision, vol. 1, oct. 2005, pp. 18 – 25 Vol. 1. 6

14 Candidate Motions

15 Assign candidate motions to all points Treat each candidate motion as a label Cast into a labeling problem, solved by graph cut: argmin{ dataCost + smoothnessConstraint } Data cost:

16 Assign candidate motions to all points Treat each candidate motion as a label Cast into a labeling problem, solved by graph cut: argmin{ dataCost + smoothnessConstraint } Smoothness constraint: preserve edge length

17 Assign candidate motions to all points Treat each candidate motion as a label Cast into a labeling problem, solved by graph cut: argmin{ dataCost + smoothnessConstraint } Symmetric smoothness constraint

18 Assign candidate motions to all points Treat each candidate motion as a label Cast into a labeling problem, solved by graph cut: argmin{ dataCost + smoothnessConstraint } Why symmetric? The non-symmetric solution prefers to preserve the edge lengths

19 Results See the paper Note: provides segmentation simultaneously

20 Global Registration of Dynamic Range Scans for Articulated Model Reconstruction Goal

21 Basic Idea Given a set of range scans Perform Pairwise Registration as initialization Maintain a DSG (Dynamic Sample Graph, the final output) Initially being the first frame (reference frame) For each coming frame F, perform global registration: Iterate: Estimate transformations for each part of DSG to align with all frames up to F Update segmentation of the DSG with the transformations Update DSG with the new frame F

22 Algorithm

23 Previous paper

24 Algorithm For all frames, “uniformly” sample the input point set as candidates [1] [1] MITCHELL, D. P. 1991. Spectrally optimal sampling for distribution ray tracing. ACM SIGGRAPH.

25 Algorithm Requires registration of DSG with the new frame

26 Register DSG with new frame For each rigid part, uniformly blend all transformations of the points in this part.

27 Algorithm The number of points for this part is less than 5 or 10% of the part.

28 Algorithm

29 Global Registration Iterate: Estimate transformations for each part of DSG to align with all frames up so far Update segmentation of the DSG with the transformations Update DSG with the new frame F

30 Global registration Part one: optimize transformations ICP-like Scheme: iterative Special part

31 Fitting cost

32 Joint Costs

33 Joints Estimation On reference frame only For all edges in DSG with end points crossing two rigid parts (with transformations Ta and Tb): Average all end points to get initial estimation Refine initial estimation by least square fitting:

34 Global registration Part two: optimize weights Similar to first paper: cast as labeling problem and use graph cut for optimization Discard small regions Global registration done

35 Algorithm

36 Update DSG Each time, start from an empty DSG For each frame F Include points from the candidates set of F if Not overlapped based on distance and normal Has a valid weight via interpolation Weight interpolation (assign each point to a rigid part) Why: To add new points from the new frame To reflect the update in transformations and label during global registration How: Compute distance to previous DSG, used as scores Use the part form highest score, if it is significant compared to other scores

37 Algorithm MANSON, J., PETROVA, G., AND SCHAEFER, S. 2008. Streaming surface reconstruction using wavelets. Comput. Graph. Forum (Proceedings of SGP) 27, 5, 1411–1420.

38 Results See Paper


Download ppt "ALIGNMENT OF 3D ARTICULATE SHAPES. Articulated registration Input: Two or more 3d point clouds (possibly with connectivity information) of an articulated."

Similar presentations


Ads by Google