1. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Classification and Survey

2. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Objectives After completing this chapter, you should be able to: Describe the current USDA soil classification system Explain how soil surveys are prepared and used List soil capability classes

3. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Classification Soil survey Depends on a system of grouping soils of like properties Soil classification Helps us to understand, remember, and communicate knowledge about soils USDA Uses a systematic approach to organize the soils of the United States

4. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. The Soil Taxonomy The system of the Soil Taxonomy is based, rather, on properties of the soil as it can be observed in the field or laboratory. It resembles the way plants and animals are grouped according to a system known as a taxonomy—a hierarchical grouping of objects at several levels to show how they relate, where the lowest level is the most specific and the highest level the broadest grouping

5. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil order (12) Broadest category Further divided into suborders Suborders (66) Divided into great groups, subgroups, and families Families (>8000) Divided into soil series

6. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Series(>19,000) Narrowest range of features Lowest official category in soil taxonomy Most commonly recognized and useful soil designation Each of these units is distinct from other units and is the same as the polypedon Each series is given the name of the town, county, or other location near where the series was first identified. Some are further subdivided into phases A phase is a variation of a series based on some factor that affects soil management, such as slope, degree of erosion, or stoniness. For example, an Ontario loam, 3 percent to 6 percent slope phase. Soil series with their phases become mapping units for the most detailed soil surveys.

7. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Orders Alfisols: deciduous forests of temperate, moist climates Andisols: recent geologic volcanic materials Aridisols: arid climates of cool to hot deserts Entisols: lack well-developed horizons Gelisols: very cold soils of the tundra

8. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Orders (cont’d.) Histosols: decaying organic matter in wetlands Inceptisols: young, but more developed than Entisols Mollisols: rich, dark soils of grasslands Oxisols: highly weathered soils of the tropics

9. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Orders (cont’d.) Spodosols: coniferous forests in cool, moist regions Ultisols: highly weathered soils in warm, humid climates Vertisols: parent materials very high in clays that shrink and swell with drying and wetting cycles

10. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part.

11. Activity -Assignment Describe the 12 soil orders mentioning, where applicable, their: 1.Physical properties, 2.Use, 3.Typical profile, 4.Where they are found in the US 5.What percent of the US soil they form. 6.The element used in the suborder name Reference: Soil Science textbook, Page 50 -54

12. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. frigid, mixed Typic Udipsamment Read the section on Soil Taxonomy on page 48-49 and then identify the parts of the above soil name that represents the: 1.Order 2.Suborder 3.Great Group 4.Subgroup 5.Family

13. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. frigid, mixed Typic Udipsamment Order Entisol Suborder Psamment Greatgroup Udipsamment Subgroup Mixed Typic Udipsamment FamilyFrigid, mixed Typic Udipsamment

14. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Sandy, mixed Mesic Torriothentic Haplustolls Identify the parts of the above soil name that represents the: 1.Order 2.Suborder 3.Great Group 4.Subgroup 5.Family

15. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Sandy, mixed Mesic Torriothentic Haplustoll Order Mollisol Suborder ustoll Greatgroup Haplustoll Subgroup mixed Mesic Torriothentic Haplustoll Family Sandy, mixed Mesic Torriothentic Haplustoll

16. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Survey Classifies, locates, and describes soils as they appear in the field Tells what soils are in a given location, the properties of the soils, and how they can be used Field mapping Typically begins with preliminary study of older soil surveys, if they exist, and documents such as aerial photographs Aerial photographs make good base maps because they show landscape features, including ponds, woods, and sand pits. Features visible on the aerial photograph may also indicate the boundaries of various soils. For detailed mapping, a soil scientist traditionally walks the land to survey it Frequently the surveyor stops to probe the soil Maps show the boundaries of the mapping units, with each unit identified by codes that vary from state to state

17. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. A section of map 28 of the soil survey of Anoka County, Minnesota. Notice areas of Zimmerman soil mentioned in the text, keyed here as Zm. This map, like many others, is now available on the Internet.

18. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil mapping symbols that give information about slope, erosion and landscape features

19. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Survey (cont’d.) Mapping units Used in soil surveys, depending on how large an area the map or survey covers For small areas, mapping units are detailed phases of soil series. For larger-scale maps, the units may be higher levels of the soil taxonomy, like families or great groups. Soil orders are the mapping units used on some of the national soil map while suborders are the mapping units on some state maps. For most county maps, phases of soil series are the basic mapping unit. Where soils are mixed up enough to be difficult to separate on the scale of the map, mapping units may be soil associations or other mapping unit combinations. A soil association consists of one or more major soils and one or more minor soils,

20. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Technology and soil mapping Global Positioning system -GPSs, Geographic information system -GISs, and Remote sensing -is the acquisition of information about an object or phenomenon without making physical contact with the object GPS relies on 24 satellites in orbit about the earth, positioned such that any point on the earth’s surface receives a signal from at least four satellites. Using the signal, a GPS unit determines its distance from each satellite; with readings from four satellites, it can determine its precise position on the earth’s surface. GISs are powerful computer software programs that organize and integrate data from a variety of sources

21. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Survey (cont’d.) Soil survey reports A soil survey report has four major parts: a set of soil maps, map legends that explain the map symbols, descriptions of the soils, and use and management reports for each soil. These parts provide information on Taxonomy, descriptions, and properties (e.g. including texture, bulk density, permeability, available water, pH, salinity) Suitability for development e.g.  urban landscape uses such as turf, ornamentals, and gardening  water-management projects such as reservoirs, drainage, and irrigation  recreational development such as playgrounds and campgrounds Ratings of suitability for engineering projects such as landfills, buildings, and roads Potential for Forests or cropping Potential as a habitat for wildlife

22. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Survey report uses Soil maps are the heart of good land-use planning Civil engineers planning a new road will study maps to find routes with good soils for roadbeds New growers or growers planning to expand find soil maps useful for choosing new land. Growers can use soil maps in many ways, such as creating a conservation plan. The information in soil surveys helps in planning irrigation, soil erosion control or other projects

23. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Land Capability Classes The USDA’s Land capability class system, rates soils according to their suitability for agriculture, and also for pasture, rangeland, timber, recreation, and other uses. Classes Class I Class II Class III Class IV Class V Class VI Class VII Class VIII

24. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Land Capability Subclasses All classes except Class I have one or more limitations Land capability subclasses indicate factors that limit soil use by means of a single-letter code added to the class number Class UseIIIIIIIVVVIVIIVIII Row cropsXX/ Hay, small grains XXX/ PastureXXXXXX RangeXXXXXX/ WoodlandXXXXXX/ Recreation, wildlife XXXXXXXX

25. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Activity Describe the 8 land capability class mentioning the suitability and limitations Reference: Soil Science textbook, Page 61 -63

26. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Land Capability Subclassess Land capability subclasses indicate factors that limit soil use by means of a single-letter code added to the class number. The letter codes are as follows: e—Runoff and erosion. w—Wetness. s—Root zone or tillage problems. c—Climatic hazard.

27. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Soil Limitation Classes Soils can also be classified by their limitations for any use Landscaping, or tree nurseries, or residential streets USDA offers formal criteria for a number of uses Information needed to categorize a soil can be found in tables in county soil survey reports

28. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Land users can readily transfer the results of soil ratings for an area onto a soil map to graphically reveal lands suitable or unsuitable for various purposes. These are land-use or interpretive maps. On the soil map, mapping units are colored in, often with green (go) for areas with slight limitations, yellow (caution) for those with moderate problems, and red (stop) for unfavorable soils. GIS software is particularly adept at creating such maps. Land-use or interpretive maps

29. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. Lands of the United States and Elsewhere Nonfederal land in the US excluding Alaska

30. © 2013 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. 19 percent of the total land of the United States is arable, compared to about 11 percent of the world. By comparison, other selected countries include Saudi Arabia at 1 percent arable, Canada 5 percent, Mexico 13 percent, and Ukraine, 56 percent.