1. Waste Gas; Types and Treatments

2. Outline Overview Air pollutants Waste gas treatmens Biofilters

3. Definition Air pollution may be defined as: -the presence in the air (outdoor atmosphere) of one or more contaminants or combinations there of in such quantities and of such durations - as may be or tend to be injurious to human, animal or plant life, or property, -unreasonably interferes with the comfortable enjoyment of life or property or conduct of business.

4. The Composition of Atmosphere

6. Air Pollution Index Value

8. Outline Overview Air pollutants Waste gas treatmens Biofilters

11. Outline Overview Air pollutants Waste gas treatments Biofilters

12. -may reduce quality - Increase cost Waste gas treatments Waste Gas Treatments Source control: a.Raw product substitution b.Reduction c.Recycle Secondary control: Treatment after it has been produced Choice of tech dictated by: -Economic -Ecological const.

13. Types of waste gas treatments a.Condensation b.Incineration c.Adsorption d.Absorption e.Membrane systems f.Biological Treatments

14. 1. Condensations Applicable for waste contaminant that are: -> concentrated and have a high boiling point -> have recycle or recovery value -> recovery is impossible for mixed pollutant stream Mechanism: -> waste gas are treated by simultaneous cooling and compressing

15. 2. Incineration Widely used, suitable for moderate flow rate waste Mechanism: -> thermal incineration involves combustion at tempt of 700- 1400 0 C -> catalytic incineration (used platinum, palladium, rubidium) at 300-700 0 C Drawbacks: -> high cost esp for low conc. Waste -> need a large amount of fuel -> produce another pollutant (Nox, dioxins)

16. 3. Adsorption Most efficient for: -> low concentration vapour -> low vapour pressure -> high molecular weight waste gas Common methods: -> fixed or fluidized bed of material such as activated carbon or zeolite Function of effectiveness: -> air flow rate -> total VOC loading

17. 3. Adsorption Limitations: -> misjudgment of bed saturation often encountered, bed maybe renewed before it is necessaru -> the saturated bed materials are often treated as hazardous material -> increasing operational cost for its treatment -> generaly it is treated by: a. Desorption with steam or hot air b. Disposal c. incineration

18. 4. Absorption Process: -> removes contaminant with a scrubbing solutions (water mostly used) -> gas enters a large contactor -> gas are transferred to a liquid phase -> silicon oil maybe used for hydrophobic pollutant -> after gas are transfered to liqiud, additional treatment need to be apllied. Drawbacks: -> need additional treatment for liquid phase (incineration. Additional wwtp)

19. Vertical Venturi Scrubber

20. Packed Bed Scrubber

21. 5. Membrane Systems The subsequent process of condensation Process: -> gas stream are compressed to 310-1400 kPa -> the pressure diferential drives the membrane separation process -> the membrane pores remain filled with water -> the organic vapour transfered through the membrane -> the process than requires treatment of liquid permeate for final VOC disposal

22. 6. Biological treatments Utilize microbial metabolic reactions Effective and economical for low concentrations of contaminant in large quantities of air. The contaminant maybe used as energy or carbon source for microbial growth Most succesfull for low molecular weight and highly soluble organic compound with simple bond structure (H2S or Ammonia)

23. 6. Biological treatments The appropiate industries: - Animal husbandary (slaugterhouse) - Composting - Crematorium - Food Processing - Fragnance - Furniture - Landfill gas extraction - Pulp and paper - Petroleum industries

24. 6. Biological treatments Biofilter Fixed Microorganism Stationary water phase Biotrickl -ing Fixed Microorganism Flowing water phase Bioscrub -ber Suspended Microorganism Flowing water phase

25. Operational Concerning Factors Characteristics of supporting medium (porosity, degree of compaction, water retention capability, ability to host microbial populations) Microbial inoculum Medium pH Temperature Medium moisture Nutrient content

26. Operational Cost include: 1) nutrients and water expenses 2) electricity for the blower and the recycle pump and miscellaneous electrical equipment 3) maintenance 4) costs associated with controlling the growth of biomass 5) capital costs

27. Applicability of various air pollution control

28. Case Studies -98% H2S RE -50-70% (toluene, benzene, xylene)

29. Case Studies -85-99% H2S RE

30. Case Studies ->90 % H2S RE ->90 % RE aromatic compounds ->95% RE ketones

31. Thank You