1. Saint Petersburg Chamber of Commerce and Industry Saint Petersburg - the key economic partner in the Baltic Sea region Innovation policy and international cooperation between Holland and Russia 8 March 2011 Twente Region, the Netherlands

2. Saint Petersburg innovation policy Saint Petersburg – international level innovation center Saint Petersburg social and economic development till 2025 (Saint Petersburg government regulation No. 884 dated 20.07.2007) - the largest international business center - the largest commercial and transport center - innovation and administration center Saint Petersburg Chamber of Commerce and Industry

3. Saint Petersburg innovation policy Forming competitive clusters is the priority of Saint Petersburg innovation policy Saint Petersburg has a variety of branched and potential inter-branch clusters, which are competitive at the international level, including informational technologies, optical electronic, instrumental engineering, automobile industry, shipbuilding, transport, material science, etc. Saint Petersburg Chamber of Commerce and Industry

4. Saint Petersburg Government STRATEGIC PROJECTS OF SAINT PETERSBURG INNOVATION CLUSTER NETWORK STRATEGIC PROJECTS OF SAINT PETERSBURG INNOVATION CLUSTER NETWORK Saint Petersburg Chamber of Commerce and Industry

5. INTERNATIONAL INNOVATION AND TECHNOLOGY CENTER As part of the visit to Bavaria of the Governor of Saint Petersburg Valentina I. Matvienko, an agreement on establishing an International Innovation and Technology Center was signed. The initiators of this agreement are: IMC/HM International Project Management Institute of regional innovation systems Russian-German Polymer Institute. The key investors of the project are: Technischer Überwachungsverein Bayern Süd (TÜV Süd) (World Certification Leader) World Trade Center (WTC) Siemens Daimler AG Erlangen AG – Germany Industrial Parks Network CATELLA Investment Group The partners of the project are: Bavaria Government Deutsches Ost Forum (German-East Forum) Technische Universität München (Munich Technical University)

6. INTERNATIONAL INNOVATION PROJECTS ENGINEERING POLYMER CENTER In November, 2007 the Engineering Polymer Center was opened - it is a joint project of OJSC Russian Railways, SPbSU, LLC IP, SKZ GmbH (Wurzburg, Germany). Goals of the Project: gathering, analysis and systematization of information concerning development and implementation of modern constructive polymer materials in world practice; holding science-practical conferences on the facilities of constructional polymer materials and new technologies of recycling them; development of innovative technologies for creating and recycling construction polymers, creation of new pilot batches and their implementation. Russian-German Institute of Polymers conducts R&Ds for the Russian Railways in co- operation with Saint Petersburg State University and the leading Universities of the city.

7. THE CENTER FOR DYNAMIC TESTS The testing site – joint project of Lengiprotrans and Mekhanobr-Technika The center's main activities are: research of the upper constructions of railway roads, highways, runaways, taking into account the load, velocities, climate factors and other conditions. Practical and theoretical research of different types of constructions and their elements for the upper roads constructions: motor and railroads, airports, undergrounds, taking into account the influence of loads, velocities, climate factors and other conditions. Theoretical research in the area of different types of materials and construction elements of the upper road construction implementation, including elastomeric materials (roadbed base plates, under-sleeper shock absorbers, rail brace sleepers) and also geotextiles and geogrids. On-site and dynamic testing of different constructions of the upper road constructions and components, checking and approving project solutions. Such a stand is located Munich Technical University Laboratory, Germany

8. At present, requested dynamic tests are ordered in foreign countries, and the presence of a Russian center will allow to make import substitution of these services and provide unique possibilities for foreign companies (test for extreme temperatures from +60° to - 60°). The center for dynamic tests will allow to test the working capacity of transport constructions, knots and materials in conditions of acting operational loadings and environmental conditions inherent to various regions of Russia and other countries. The “Testing stand” project was presented at the 9 th Russian-German Forum “St. Petersburg Dialog”, 14-16 July, 2009, Munich, Germany. THE CENTER FOR DYNAMIC TESTS - TESTING SITE

9. MOSCOW – SAINT PETERSBURG HIGH-SPEED SERVICE OJSC Lengiprotrans is the general designer of the project for the investment feasibility to establishing the Moscow – Saint Petersburg high-speed service

10. SAINT PETERSBURG – HELSINKI HIGH-SPEED SERVICE OJSC Lengiprotrans is the general designer of the project of organizing the high-speed service Saint Petersburg - border - Helsinki with a freight service

11. THE OVERGROUND EXPRESS TRAIN OJSC Lengiprotrans is the general designer of the project “Construction of a new type of urban passenger transport, the Overground express train” in St. Petersburg

12. CREATION OF THE CONSTRUCTION MATERIALS NANOCENTER Ioffe Physical- Technical Institute National Academy of Sciences of Belarus Komsomolskaya Pravda scientific production association for recycling plastic RUSNANO

13. The Ioffe Physical Technical Institute is one of the largest science centers in Russia. It conducts both fundamental and applied research in the major areas of modern physics and production engineering. The institute was established in 1918 by Abram Fedorovich Ioffe who then headed it for several decades. IOFFE PHYSICAL TECHNICAL INSTITUTE The institute is a structural division of the Russian Academy of Sciences and is a part of the organization united in the Department of Physical Sciences of the Russian Academy of Sciences. Since 1987, the Ioffe Physical-Technical Institute has been led by Zhores Ivanovich Alferov, the vice-president of the Russian Academy of Sciences, deputy of the State Duma and the Nobel prize winner

14. The purpose: Development, implementation and manufacturing devices of modern opto- and nanoelectronics in the field of solar and hydrogen power engineering, power electronics, laser instrument engineering, diagnostic and medical equipment for modern medicine. Creation of a high-duty centre of designing and manufacturing of collective access for instrument-engineering branch in Russia Tasks: Manufacturing of modern microcircuits of all classes with flash-memory as background serial products for the world market; Manufacturing of solar cells for independent power supply systems; manufacturing of photoreception CCDs and bolometric matrixes; Manufacturing of semiconductor lasers; Manufacturing of light- and photo diodes; Development and manufacturing of process equipment for electronic and medical instrument engineering; Development and manufacturing of microsystems of individual human diagnostics IOFFE PHYSICAL TECHNICAL INSTITUTE Physics-Technological Nanoelectronic Center

15. Tasks: Development and manufacturing of “systems on a crystal” for the instrument engineering factories of St. Petersburg and Russia; Development and manufacturing of semiconductor devices for power electronics; Manufacturing of electronic systems for the motor-plants based in St. Petersburg; Creation of conditions for rapid decrease in expenses for development and manufacturing of electronic systems and devices; Providing for the factories of St. Petersburg of modern means of development and libraries in the mode of collective access; Development and implementation of automated systems of designing of different levels and purposes; Development and manufacturing of base electronic systems for aircraft, Russian Railways, RAO ES, ship builders. IOFFE PHYSICAL TECHNICAL INSTITUTE Physics-Technological Nanoelectronic Center

16. FOURTH GENERATION DEVICE FOR MANUFACTURING FULLERENES AND NANOCOMPOSITES FOR MANUFACTURING FULLERENES AND NANOCOMPOSITES Ioffe Physical Technical Institute National Academy of Sciences of Belarus Komsomolskaya Pravda scientific production association for recycling plastic RUSNANO Innovation project “Creation of the Nanocenter of polymer composite materials and coatings for development of the “green” (resource- and energy-saving) technologies for Vodokanals and housing and communal services using the transfer of technologies from the transport industry” won in the competition for the grant of the Government of St. Petersburg as the best innovation project-2010 in the frameworks of the Cluster

17. The centre of collective use in the field of manufacturing nanocarbonic materials and fullerenes: The complex of equipment (including the license to use the equipment) for manufacturing nanomaterials; Nanomaterials production technology (including design and operational documentation); Technological possibilities for recycling the materials into products; The Laboratory complex for materials and product quality control. Strategic task of the Center: Commercialization of scientific research and attraction of strategic customers. At the moment, an agreement with the Ministry of Economics of Finland on manufacturing fullerene- containing nanocarbonic materials with a polymeric matrix and fullerene-containing modificators is being prepared and also corresponding requests sent to the ROSNANO The project was presented at the forum “Effective Cooperation in Europe”, June 7-9, 2010, Brussels, Belgium and the “Rusnano Development Workshop”, November 8-12, 2010, Boston, the USA National Academy of Sciences of Belarus Komsomolskaya Pravda scientific production association for recycling plastic RUSNANO Ioffe Physical Technical Institute

18. CONSTRUCTION OF THE PROTOTYPING CENTER AND INTERNATIONAL COOPERATION NETWORK FOR CREATION OF LIGHT-EMITTING DIODE PRODUCTS AND DEVICES ON THE BASIS OF AN INTEGRATED TECHNOLOGICAL PLATFORM The key participants: SPbSU ITMO Optoelectronics cluster Mechanical engineering and metal-working cluster Saint Petersburg State University of Informational Technologies, Mechanics and Optics

19. One of the primary goals formation of the university as a national innovative hub, aimed at effective commercialization of results of scientific research and development in the field of IОТ with participation of Russian and foreign participants of innovation activity One of the primary goals – formation of the university as a national innovative hub, aimed at effective commercialization of results of scientific research and development in the field of IОТ with participation of Russian and foreign participants of innovation activity SPBSU ITMO INNOVATION DEVELOPMENT The Program Document – The Program of SPbSU ITMO development for 2009- 2018. The format – national research university ITMO. The Mission – creation of competitive advantages of Russia in the sphere of informational and optical technologies in conditions of speeding up scientific and technical development and globalization of the world economy

20. CONDITIONS OF THE COOPERATION NETWORK FORMATION The availability of the following is necessary: Rules of conduct for cooperation members. Business-processes for specialist cooperation during cooperative project implementation. A unified informational environment providing access to the electronic documents of the project and cooperation network resource databases. Technical and the software distribution of work of the specialists of a cooperation network on the basis of various Internet resources. Modern software and industrial equipment, allowing to produce competitive products. Qualified specialists in different technical areas, whose competence should correspond to modern industrial standards. The project was presented in the frameworks of the Youth International Economic Forum, June 16-17, 2010, St Petersburg, Russia

21. Innovation project “Creation of the Prototyping Center of items from composite materials and coatings application” won in the competition for the grant of the Government of St. Petersburg as the best innovation project-2010 for the Prototyping Center of St. Petersburg creation Personnel education: SPbSU ITMO, SPbSUEF

22. THE CENTER OF LEADING PRODUCTION ENGINEERING Council of experts Tasks: -Revision and approval of the most promising technologies from the experts’ point of view Tasks: -Creation of a school of designers on the basis of developed technologies; -Project problem solving; -Creation of qualification improvement courses; -Creation of department of leading production engineering Tasks: - Proposals for the Council for promising technologies which are included in the work of the Center's executive bodies; - Participation in the Advisory council; - Transmitting the results of the Center's work to the market; - The organization of commodity markets The center of leading production engineering Executive board Tasks: - Development of production technology; - Development of retraining methods; - Creation of skilled-experimental manufacturing

23. THE NETWORK OF INNOVATION- TECHNOLOGY CLUSTERS INTERNATIONAL CENTER FOR CENTER FOR INNOVATION AND TECHNOLOGY TECHNOLOGY OJSC LENGIPROTRANS SPA KP Ioffe Physical Technical Institute Svetlana - Optoelectronics SPbSU ITMO OJSC RZD Institute of Polymers SPbSU INNOVATION INFRASTRUCTURE DESIGN CENTERS SPECIALIZED LABORATORIES COLLECTIVE ACCESS CENTERS CENTERS NEWPROJECTS NEW PROJECTS PROJECTS NEW NEW OBJECTS OBJECTS NEW NEW CLEAR ROOMS NEW OBJECTS OBJECTS NEW PROJECTS PROJECTS NEW

24. V St. Petersburg Partneriat St. Petersburg Industrial Fair Russian-Finnish Industrial Congress March 15-17, St. Petersburg I Day, 15 March 2011 II Day, 16 March 2011 III Day, 17 March 2011 Opening of the Protocyping Center of St. Petersburg 14.00 – 17.30 IV Annual Conference “Nanotechnology and nanomaterials” 14.00 – 17.30 Round table “Cluster principal for personnel education for the Russian industrial complex” 15.30-19.00 Meetin of the Engineering Club “Transfert of the innovation technologies in industrial sphere” 12.00 – 16.00 Work of the platform of business contacts “Cluster policy of St. Petersburg – international cooperation- from competition to integration” 12.00 – 13.00 Official opening of the V St. Petersburg Pratneriat 16.00 – 18.00 Meeting of the Stolypin Club 16.00 – 18.00 Meeting of the St. Petersburg Chamber of Commerce and Industry 11.00 – 13.00 Round table “Cluster policy and modernization projects in industry of St. Petersburg” 13.00-13.15 Presentation “Creation of the Center for prototyping of items from composite materials and coatings application”

25. Is presented within: Delegation of Saint-Petersburg official visit in the South America headed by the Governor of Saint-Petersburg V.I. Matvienko, April, 2010; Delegation of Saint-Petersburg official visit in the South America headed by the Governor of Saint-Petersburg V.I. Matvienko, April, 2010; Delegation of Saint-Petersburg official visit in Ukraine (“St.Petersburg days in Harkov”) headed by Vice-governor of Saint-Petersburg R.E. Philimonov, April, 2010; Delegation of Saint-Petersburg official visit in Ukraine (“St.Petersburg days in Harkov”) headed by Vice-governor of Saint-Petersburg R.E. Philimonov, April, 2010; International forum “Effective cooperation in Europe” in Brussels (Belgium), June, 2010; International forum “Effective cooperation in Europe” in Brussels (Belgium), June, 2010; Round table on effective cooperation in the Baltic Sea region in Turku (Finaland), September, 2010; Round table on effective cooperation in the Baltic Sea region in Turku (Finaland), September, 2010; Estonia – Latvia – Russia Cross Border Cooperation Programme Within European Neighbourhood and Partnership Instrument 2007-2013 in Daugavpils (Latvia), October, 2010; Estonia – Latvia – Russia Cross Border Cooperation Programme Within European Neighbourhood and Partnership Instrument 2007-2013 in Daugavpils (Latvia), October, 2010; Program of SC “RUSNANO” “Attraction of additional financing of venture capital investments” in the USA, November, 2010. Program of SC “RUSNANO” “Attraction of additional financing of venture capital investments” in the USA, November, 2010. PROJECT FOR PROTOTYPING CENTERS AND INDUSTRIAL DESIGNING CENTERS CREATION AND INTERNATIONAL COOPERATION WEB CREATION

26. THANK YOU Sergey Tsybukov Vice Chairman, SPb CCI Board Tel. 8 (812) 542-15-21 Fax: +7 (812) 542-71-48 E-mail: tsybukov@kp-plant.rutsybukov@kp-plant.ru www.kp-plant.ru