2. 1 Probably The Most Advanced Presence Sensors In The World. Ultra Fine MotionFine MotionHigh Frequency H.F.CorridorSmoke / FireCO2 Automatic Time delay Adjustment Automatic and Manual Lux Setting feature Field bus & Networking enabled via a potential free contact Square Detection Zone Mechanical reach Adjustment Infrared Remote Control Available Sensitive to a Very Small Motion KNX and DALI Compatible SALIENT FEATURES

3. 2 Have you Faced This Situation Before …….

4. 3 Switching light Switching light & HVAC (heating/ventilation/air-conditioning) Controlling light Modern bus systems (DALI, KNX) Wireless system DIM COM2 COM1AP COM1 Suitable connection options for different situations 3 Occupancy & Presence Sensors For Lighting Control Professionals.

5. 4 Modular system Sensor modules IR Quattro HD IR Quattro HF 360 Dual HF Interfaces DIM COM2 COM1AP COM1 IR Quattro HD COM1

6. 5 What is the difference between a presence detector and a motion detector? The main difference between presence detectors and motion detectors lies in their Detection properties Areas of use Possible settings and connections

7. 6 Motion detectors Motion detectors detect walking movements within the set detection zone. Basic principle: Preset light value below threshold + movement registered = Light ON No movement registered + set stay-ON time expired= Light OFF Ideal areas of use: outdoor areas and rooms with a high level of movement

8. 7 Presence detectors Presence detectors respond to the slightest movements using extremely high-resolution, precision sensor technology. Basic principle: Presence + light level is below a certain threshold= Light ON No presence detected + set stay-ON time expired= Light OFF or Adequate ambient brightness (despite presence)= Light OFF Ideal areas of use: indoor areas, especially for seated activities (offices in which people work at desks, classrooms etc.) and other special areas, such as sports halls, changing rooms, corridors or storage areas.

9. 8 Motion DetectorsPresence Detectors DetectionWalking movementsEven the slightest movement, also seated activities ApplicationIndoors and outdoors Indoors: garages, corridors, storerooms Outdoors: driveways, entrances, car parks, carports, fronts of buildings Motion detectors provide convenience, safety and security Indoors Offices, classrooms, conference rooms etc. High rooms: warehouses, sports halls etc. Additional control of heating, ventilation, air-conditioning or constant lighting control Presence detectors provide max. energy efficiency and convenience Connection capability Light Switched relay output Additional loads Light Heating, ventilation, air-conditioning (HVAC) 1-10 V dimming interface DALI, KNX Light 'ON' criterion Movement after ambient light has fallen below thresholdLight channel: movement/presence when ambient light is below a set threshold HVAC channel: movement/presence Light 'OFF' criterion/light measurement Load/artificial light remains ON as long as movement is detected, light measurement remains deactivated during this time. Period light stays 'ON' for starts after last detected movement, load/artificial light then switches off Light 'OFF' if ambient light is sufficient despite detection of presence/movement Light measurement remains activated HVAC channel and light OFF, when stay-ON time has expired after the last movement OtherMore setting capabilities for matching sensor to control task Considerably more precise detection Different options depending on the type of room

10. 9 Presence must be detected precisely and reliably even when people move only minimally during their seated activities.

11. 10 Extremely high-resolution sensor systems detect the slightest movements. Presence range at a mounting height of 2.8 m Steinel Presence Control PRO IR QUATTRO HDGood presence detector with 3 pyro sensors 4800 switching zones 1300 switching zones

12. 11 Presence detectors must cover the entire room without overlapping and without gaps.

13. 12 Zones can be clearly planned Detection without overlapping and without gaps Detection reliably planned for every point in the room No detection in passageways Presence zone is the last to be limited Advantages of a mechanically scalable square detection zone Ideal for Open Plan Office Areas The world is round but rooms aren‘t

14. 13 Time setting for light Pulse mode Actuation of a staircase lighting time switch 2 seconds ON, 8 seconds OFF IQ mode Self-learning stay-ON time Optimally adapted to the room and use Intelligent functions and settings for adapting to individual needs Switch-on delay for HVAC with Potential Free Output Room surveillance HVAC switching contact is only switched when the room is actually being used Actuator is not tripped by someone briefly looking into the room

15. 14 Special function: basic brightness and constant-lighting control Basic brightness 10% dimming when brightness drops below threshold and movement is not detected For 30 seconds – 30 minutes after expiry of the last detected movement Or when brightness value remains permanently below threshold Constant lighting control Constant level of brightness within a room Artificial light is added proportionally to the measured daylight Amount of added artificial light depends on the incident daylight Manual override via push-button, switch or remote control Manual intervention must be possible during presentations, video shows External button/switch connected via separate "S" terminal Additional ON – ON/OFF function with manual override ON only allows the light to be switched ON manually, but not OFF ON/OFF allows the light to be switched ON and OFF manually

16. 15 Semi-automatic and all-automatic Semi-automatic (the light is switched off by the sensor) Manual ON, automatic OFF Via external button or switch Manual OFF possible at any time All-automatic (the light is controlled entirely by the sensor) Automatic ON, automatic OFF Manual ON and OFF override possible at any time Normal mode/Test mode Normal mode Presence detector operates with the values set on the potentiometers, DIP switches and the remote control Test mode Test correct operation, as well as setting and pacing out the detection zone ON for 8 seconds when presence is detected Test mode can also be activated via flashing blue LED without switched load when presence is detected

17. 9/20/2015 Pammvi Group Of Companies C-501, Remi Bizcourt, 9, Shah Ind Estate, V.D Road, Andheri (w), Mum - 53. Board: 022-26731904 / 26731052 Ext # 35 Email: info@pammvi.cominfo@pammvi.com Presence Sensor Web: http://www.occupancysensor-motionsensorlights.comhttp://www.occupancysensor-motionsensorlights.com Sensor Website - http://www.pir-motion-sensor.com/http://www.pir-motion-sensor.com/