1. Environment

2. Strengthen cooperation with DENSO Group and partners Eco Management Development of environmentally friendly technologies and products Eco Products Enhancement of external relationships and information disclosure Eco Friendly Reduction of environmental impact in global production Eco Factory DENSO EcoVision 2015

3. Environmentally Friendly Products Preserving Clean Air Monolithic Carrier Air Flow Meter Fuel Injector Spark Plug Stop/Start Starter High Pressure Fuel Injector Oil Control Valve Variable Displacement Compressor Promoting Recycling HVAC Unit Starter Alternator Power Window Motor Reducing Hazardous Substances Instrument Cluster Air Conditioning Panel Cooling Fan Motors Windshield Wiper System Power Seat Motor Radiator Tank

4. Five Key Evaluations before Mass Production Enhance fuel efficiency Reduce volume of refrigerants used, and develop substitutes Improve recyclables rate Reduce environmentally hazardous substances Remove pollutants from exhaust gases []

5. Preserving Clean Air Monolithic Carrier The monolithic carrier acts to reduce or oxidize harmful emissions such as hydrocarbons, carbon monoxide, and nitrogen oxides. Air Flow Meter This air flow meter measures the flow rate of air into the intake manifold, resulting in the correct air-fuel ratio for efficient combustion. North American Manufactured Eco-Products

6. Preserving Clean Air High-Pressure Fuel Injector The high-pressure fuel injector, developed for gasoline direct-injected engines, allows for more precise controlling of combustion and emissions, which translates to improved fuel economy. Spark Plug Tough metal alloys applied to the tip of the plug ensure proper ignition even during idling, with less fuel consumption and less noise. North American Manufactured Eco-Products

7. Preserving Clean Air Stop/Start Starter Stop/start systems cut the engine when the vehicle is at a stop or in other idle traffic situations, helping improve fuel efficiency by approximately three to five percent and to reduce CO 2 emissions.

8. North American Manufactured Eco-Products Preserving Clean Air Oil Control Valve The oil control valve controls the direction of the oil flow and activates the variable camshaft timing valve, providing more fuel savings and power. Variable Displacement Compressor The variable displacement compressor can alter refrigerant displacement to control air conditioner cooling capability, making it highly fuel-efficient.

9. Injector This fuel injector’s atomizing capability dispenses fuel in precise quantities and allows for better mixing with air, increasing fuel efficiency. Preserving Clean Air North American Manufactured Eco-Products Starter The die cast process reuses 90 percent of internal scrap aluminum. Promoting Recycling

10. North American Manufactured Eco-Products Promoting Recycling HVAC Unit The plastic case on this HVAC (heating, ventilation and air conditioning) unit is molded with 20 percent in- house recycled material. A titanium-based process provides corrosion resistance for the evaporator rather than hexavalent chromium, an environmentally hazardous substance. Lead solder was eliminated from processing operations by a raw material switch from copper to aluminum.

11. North American Manufactured Eco-Products Promoting Recycling Alternator A redesigned segment conductor produces a smaller, lighter alternator with higher efficiency and lower noise. Power Window Motor The power window motor is engineered to be the most compact, and is available in multiple output torque levels and three versions of control: standard, sensor and smart.

12. Reducing Hazardous Substances North American Manufactured Eco-Products Reducing Hazardous Substances Instrument Cluster & Air Conditioning Panel The instrument cluster and air conditioning panel are manufactured without the anti- corrosive hexavalent chromium, an environmentally hazardous substance that can leak into the underground water table if a product containing the metal is not disposed properly.

13. North American Manufactured Eco-Products Reducing Hazardous Substances Cooling Fan Motors The fan motor is manufactured with lead- free electrical brushes. Power Seat Motor The power seat motor is engineered to optimize material usage while maintaining performance and size advantages for today’s innovative, lightweight seat system.

14. North American Manufactured Eco-Products Reducing Hazardous Substances Windshield Wiper System The wiper motor is manufactured with lead-free electrical brushes. Radiator Tank (plant-derived resin) The plant-derived resin radiator tank, which is made from castor oil, is green all the way around. Compared to conventional products, it releases less CO 2 emissions into the environment during its life cycle because it is partially made from material extracted from plants, which absorb CO 2 through the photosynthesis process. It also helps conserve oil, a fossil fuel which is being depleted.

15. CO 2 Emission Target – DENSO North America 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 0.0 FY 2004FY 2005FY 2006FY 2007FY 2008FY 2009FY 2010 T-CO 2 /M USD 83.4 89.2 92.8 79.8 68.9 65.3 FY 2011FY 2012FY 2013FY 2014 53 48 47 47.5 51.7 Reduce CO 2 Emissions

16. Reduce Water Consumption Target – DENSO North America 400.00 350.00 300.00 250.00 200.00 150.00 100.00 50.00 0.0 FY 2004FY 2005FY 2006FY 2007FY 2008FY 2009 M3/M USD 304.7 263.27 199.8 202.15 221.1 Reduce Water Consumption FY 2000FY 2001FY 2002FY 2003 246.5 160.9 206.0 190.0 185.0 FY 2010 160.9 FY 2011 160.9 FY 2012 160.9 FY 2013 160.9 FY 2014 160.9

17. Reduce Landfill Waste Target – DENSO North America Reduce Landfill Waste 6,000,000 5,000,000 4,000,000 3,000,000 2,000,000 1,000,000 0.0 FY 2004FY 2005FY 2006FY 2007FY 2008FY 2009FY 2010 M3/M USD 5,554,439 3,943,084 2,272.893 1,115,807 1,380,726 FY 1999FY 2000FY 2001FY 2002FY 2003 4,838,626 2,159,469 1,375,302 967.336 452,290 FY 2011 452,290 FY 2012 452,290 FY 2013 452,290 FY 2014 452,290 4,886,536

18. Reduce Toxic Chemical ReleasesTarget – DENSO North America 45 40 35 30 25 20 15 10 5 0 FY 2004FY 2005FY 2006FY 2007FY 2008FY 2009 kgs/M USD Reduce Toxic Chemical Releases FY 2000FY 2001FY 2002FY 2003 Color Key Transferred To POTW Landfill Air