Presentation is loading. Please wait.

Presentation is loading. Please wait.

Hazardous materials awareness Chapters 4 and 5 Protective equipment Command, safety and scene control.

Similar presentations


Presentation on theme: "Hazardous materials awareness Chapters 4 and 5 Protective equipment Command, safety and scene control."— Presentation transcript:

1 Hazardous materials awareness Chapters 4 and 5 Protective equipment Command, safety and scene control

2 Protective equipment

3 Personnel need to be protected from the hazards of the hazardous materials release. Structural firefighting turnouts provide very little chemical protection. First responders should be aware of chemical protective clothing and understand its limitations.

4 Types of protective equipment Level A suits give high protection against vapors, gas, mist, and particles for the wearer and the SCBA Level B suits provide splash protection, and is used with an SCBA Level C is a level B suit with a different form of respiratory protection, like respirators.

5 Types of protective equipment Level D protective equipment provides no respiratory protection, and very little skin protection. Work clothes, uniforms, and structural turnouts are all considered to be level D protection. Turnouts are not resistant to corrosives, not airtight, and will not protect against vapors. They may even soak up a hazardous substance.

6 High temperature protective clothing

7 Protective breathing equipment

8 Command, safety and scene control

9 Local emergency response plans A local plan must address the following areas; –Hazmat facilities and methods of transportation –Methods of handling hazmat incidents –Methods to warn people at risk –Equipment and information resources

10 Local emergency response plans (cont.) –Evacuation plans –Training of first responders –Schedule for excercising the plan First responders should be familiar with the plan, and know where to find it. Copies should be made for all first responders.

11 Emergency information management There are two types of communication associated with hazmat emergencies –External communications are the initial dispatch and initial information –Internal communications consist of additional information that responders gather after they have arrived on scene.

12 External communication data Location of incident Identity of material involved Approximate quantity of material Weather conditions at site Persons and areas threatened Events leading to incident Any control actions taken Type of assistance needed Responsible party and contact data

13 Internal communication data Upon finding that a hazmat incident is in progress, first responders should ask for additional hazmat response Additional radio channels will need to be assigned Whenever possible, on scene units need to talk directly to technical specialists All information must also be shared with the incident commander.

14 Mission of incident operations for the awareness level Recognize the incident and implement sops Call for appropriate help to mitigate the incident Secure the area and deny entry Survey the incident from a distance and identify the material Determine appropriate actions as per the dot erg guide

15 Incident management The incident command system should be used to manage the incident, and should include the following features; –Common terminology –Modular organization –Integrated communications –Unified command structure

16 Hazard assessment Based on an assessment of the situation, the ic needs to develop an action plan based on three strategic goals; Life safety Enviormental protection Property conservation

17 Modes of operation General classification of actions to be taken; –Non-intervention –Offensive –Defensive

18 Non-intervention When to use; –When hazards at site are too great –Beyond capability of responders –Explosions are imminent –Container damage threatens a massive release Involves the following; –Withdrawing to a safe distance –Report scene conditions and control scene –Call for necessary evacuations and call for additional resources

19 Defensive When to use; –When hazard type calls for defensive actions –When first responders are trained and equipped for defensive hazmat operations Tasks needed; –All of the same tasks as non-interventioon along with; –Control material spread by diverting to a safe location –Construct dikes and dams –Control ignition sources

20 Offensive This is where responders take aggressive and direct action with containers and equipment to stop the release, stabilize and mitigate the incident Will result in contact with the material and will require appropriate protective equipment This is beyond the scope of first responders and is carried out by hazmat technicians

21 Determining levels of hazardous materials incidents Level I incidents are the least serious, and within the capabilities of the fire department. Gasoline spill from a vehicle Level ii incidents are larger and may overwhelm the local juristiction by size or material involved drum of corrosives or overturned tanker Level iii incidents are on a disaster scale and will involve help from many agencies, including the state and/or federal goverment

22 Eliminating ignition sources Internal combustion engines Electric motors, switches and controls Lighting equipment Fuel powered equipment Open or pilot flames Electrostatic or frictional sparks Heated metal surfaces Fusees, flares,and lanterns Radios, hand lights,pagers and pass alarms

23 Establishing the initial isolation distance Any material in the yellow or blue pages of the dot erg guide that are highlighted are in the green pages of isolation distances. These distances do not apply if the material is on fire or has been leaking for more than 30 minutes Green pages also give protective action distances for small and large spills

24 Controlling access to the initial isolation zone Station a responder at approaches and deny entry Activate local alarm devices Reroute traffic away from scene Put up physical barriers tape, rope, barricades Transmit warnings over pa systems Use media to give warnings

25 Evacuees Need to be told nature of emergency, route to proceed, and location of assembly area Evacuees may need to be decontaminated, and triage may need to be performed. Record identification of those evacuated

26 Triage/treatment area Evacuees are brought here for assessment and stabilization Responders should use caution with victims when moving them from decon to triage in case they have not been throughly decontaminated Victims are then handed over to ems personnel who have been trained in hazmat response


Download ppt "Hazardous materials awareness Chapters 4 and 5 Protective equipment Command, safety and scene control."

Similar presentations


Ads by Google