1. E-readout workplan & organization Successfully passed FDR – Draft report: ATL-IP-MR-0003ATL-IP-MR-0003 Mechanical baseline is defined Focus now more on electronics/system issues – This meeting (Thursday 6pm) is the primary forum Organization – Need to be efficient as a team – Clarify who is who & who does what … – Should improve communication/information sharing

2. Organization & meetings nSQP Production meetings (M.Capeans) Mondays 9-9:30 Technical team (M.Capeans) Project Engineer: D.Giugni Engineers, designers: S.Mikal, E.Richards M-technicians: V.Durasanti, P.Charra, B.Brunel, P.Nordahl Mondays 9:30 – 10:30 Assembly Team (D.Giugni) Assembly experts: V.Akhnazarov, M.Twasesky + 1 Assembly team: 6 technicians, 6 solderers (t.b.c.) QA (D.Dobos) Production Acceptance Testing: X.Pons Production DB: D.Muenstermann Readout Chain & System tests: J.Dopke, M. Keil nSQP New Components meetings (F.Dittus, D.Dobos) Thursdays 18-20 Development team LVDS chip: M. Barbero Optoboard: K.K.Gan, Shane, M.Ziolkowski Optobox: R.Boyd, S.Welch E-board development: M.Kocian, D.Nelson, M.Oriunno Harness probing cards developers: O.Rhone, O.Dorholt Production Team e-board, ER PPO cable board, ER PP1 connector board, optoboard: R.Boyd, J.Dopke, X.Pons Optobox (motherboard, endboard): R.Boyd, S.Welch Optocomponentes: S.Gibson, J.Dopke, A.La Rosa VCSEL, DORIC Management meetings Thursdays 8:30-9:30 M.Capeans, F.Dittus, D.Dobos, D.Giugni, B. Di Girolamo (invited) Work in progress …!

4. nSQP electronic boards 1PP1 tapes 2PP0 Panels 3PP0 Flex 4E-Board (active board) 5ER PP0 Cable Board 6ER PP1 Connector Board 7OptoBoard (active board) 8OptoBox Motherboard 9OptoBox End-Board We have 9 different types of electronic boards – 2 of which with active components Can we produce prototypes of all boards at CERN ? We need a contact person at CERN for each board type – For coordination & follow-up with TE-MPE-EM – To assure complete and consistent documentation Design specifications QC specifications (inspection & test procedures, acceptance criteria) – To help organizing the full production …

5. nSQP electronic boards 1PP1 tapes 2PP0 Panels 3PP0 Flex 4E-Board (active board) 5ER PP0 Cable Board 6ER PP1 Connector Board 7OptoBoard (active board) 8OptoBox Motherboard 9OptoBox End-Board We have 9 different types of electronic boards – 2 of which with active components Can we produce prototypes of all boards at CERN ? We need a contact person at CERN for each board type – For coordination & follow-up with TE-MPE-EM – To assure complete and consistent documentation Design specifications QC specifications (inspection & test procedures, acceptance criteria) – To help organizing the full production …