1. Welcome 欢迎 Using the PCC 使用 PCC Dipl.-Ing. Manfred Schleicher

2. 2Using the PCC/ Manfred Schleicher (2012-01-03)2 PCC enables to transfer recorded data from JUMO paperless recorders JUMO controllers with registration function PCC 可用来从久茂无纸记录仪，久茂带记录功能的控制器传递记录数据 … and provides this data in an archive data file 并在一个存档文件提供这数据 This presentation exemplifies how to set the data transfer for a paperless recorder LOGOSCREEN nt via ETHERNET 此演示示例如何对一台无纸记录仪提供以太网设置数据传输

3. 3Using the PCC/ Manfred Schleicher (2012-01-03)3 PCC connection paperless recorders PCC 所连无纸记录仪 LOGOSCREEN 500 cf LOGOSCREEN nt LOGOSCREEN cf / es

4. 4Using the PCC/ Manfred Schleicher (2012-01-03)4 PCC connection controllersPCC 所连控制器 IMAGO F3000 IMAGO 500

5. 5Using the PCC/ Manfred Schleicher (2012-01-03)5 Transfer possibilities 传输的可能 There are four possibilities to transfer data 有 4 种可能来传递数据 ETHERNET 以太网 RS interface 串口 MODEM connection 调制解调器连接 PC interface and USB interface (LOGOSCREEN nt) 电脑接口和 USB 接口（ LSnt ）

6. 6Using the PCC/ Manfred Schleicher (2012-01-03)6 LS nt via ETHERNET 通过以太网的数据传输 In defined time intervals the PCC accesses the device 在定义的时间段 PCC 进入设备 The software analyses which data are recorded in the device and which are stored in the archive 软件分析记录在仪器哪些在存档文件中 Data which are not in the archive are transferred to the archive and stored 哪些数据不 IP address10.10.90.41 Sub net mask:255.255.0.0 Gateway: 10.10.0.1 LOGOSCREEN nt

7. 7Using the PCC/ Manfred Schleicher (2012-01-03)7 Data to be read 要读取的数据 Read data are marked in the paperless recorder The memory capacity is defined as free memory The free memory is displayed at the front of the device With factory setting the displayed free memory refers to the readout via CF card When working with PCC the shown free memory should refer to the interface. The following setting has to be executed:

8. 8Using the PCC/ Manfred Schleicher (2012-01-03)8 Device lis 设备清单 t Devices from which data are transferred have to be entered in the device list

9. 9Using the PCC/ Manfred Schleicher (2012-01-03)9 Define LOGOSCREEN nt 定义 nt Create a new device, define LOGOSCREEN nt Define communication Setup or ring memory via TCP/IP

10. 10Using the PCC/ Manfred Schleicher (2012-01-03)10 The IP address of the recorder has to be entered. IP-addressIP- 地址

11. 11Using the PCC/ Manfred Schleicher (2012-01-03)11 Select the archive (s) in which the date have to be stored In our example the data are stored in two different archives (one on the hard disc in the PC and one on a server) Archive

12. 12Using the PCC/ Manfred Schleicher (2012-01-03)12 Time settings Time intervals for data transfer

13. 13Using the PCC/ Manfred Schleicher (2012-01-03)13 The device list Define LOGOSCREEN nt In the menu “time settings” you can define a time synchronization In our example at 6:00 a.m. the device time of the paperless recorder is synchronized with the time of the PC to which the paperless recorder is connected. (The assumption is that the time of the paperless recorder has a time deviation less than 30 sec to the time of the PC.)

14. 14Using the PCC/ Manfred Schleicher (2012-01-03)14 Automatic mode Start automatic transfer After start of the automatic mode the data of the devices are automatically collected every 2 hours The status of the transfer is displayed

15. 15Using the PCC/ Manfred Schleicher (2012-01-03)15 Archive The archives are available an can be opened with the PCA3000 software

16. 16Using the PCC/ Manfred Schleicher (2012-01-03)16 Automatic in background With the function “automatic in background” the software is only shown as a little symbol. But it is active. After restart of the PC, the PCC starts automatically and works in the background With double click on the software is shown again

17. Thank you for your attention.