1. Long Range Wireless LAN Platform
Wireless ISP Networking Scenario
Ver. e; Aug 2006

2. 2.5 or 2.4 GHz or 5.8GHz Bridge unit as backhaul for upper level transmission
2.4GHz AP & WEC/CPE (PCMCIA, PCI, USB, Centrino) for blanketing the local area
Bridge as back-bone for connecting
areas/nodes every 15~25Km
2.5 or 2.4/5.8GHz
Bridge
2.5 or 2.4/5.8GHz
Bridge
2.5 or 2.4/5.8GHz
Bridge
AP on Node
(Cell)
AP on Node
(Cell)
2.4GHz
CPE for
Company
AP on Node is connected by CAT5 cable to 5.8GHz Bridge
2.4GHz to blanket a certain area, building, companies and personal user
CPE in
house
AP on Node
(Cell)

3. Network Operating Scenario
Satellite
Broadband
Provider To
WAN
+ 20Km
20Km
Bridge as backbone
To next node H U B
HUB
Satellite
Receiver
Router OR
A-1000
wired
WAN
AP on Node
(Cell)
ISP
Main
Building
Blanket the
Local clients
CPE in
house

4. Scenario on each AP Tower
AID-2401/WEC
WL-24005G/WEC
WL-2410GM/WEC
Communicating to Wi-Fi clients:
WL-2410GM/WEC
AID2401 in
house
2.4GHz
Communicating to Master (Bridge) on ISP main building
2.4/5.8GHz/Bridge and 2.4GHz/AP is connected by CAT5 cable
2.4 /5.8GHz
Bridge

5. 3 tips for node-to-node connection : TIP 1AP H U B AP
10Km
25Km AP
Bridge
Slave 1
10Km
~25Km
10Km
~25Km
LAN
Server H U B
Internet
ISP
Bridge
Slave 2
Bridge/
Master1
Bridge/
Master2 PC PC
H U B
H U B
H U B PC AP AP AP AP AP AP PC PC PC
This scenario is utilizing Point-to-MultiPoint
concept; with the scenario of Master to
Master, the wireless coverage can be doubled
while the LAN network can be wirelessly
extended by times.

6. 3 tips for node-to-node connection : TIP 2
10Km
~25Km
10Km
~25Km
H U B
Bridge/
Master1
Bridge/
Master2
Bridge
Slave 2
Bridge
Slave 1
Bridge AP
H U B
Wired Connection in the mid-way point,
It is best recommended, The great advantage is “No Speed Reduced”
Bridge AP

7. 3 tips for node-to-node connection : TIP 3
10~25Km
10~25Km
Bridge
Slave 1
Bridge
Master
Bridge
Slave 2
The distance from Slave 1 via Master to Slave 2 is totaled
at 20~40Km. All are going through radio transmission.
The antenna to be used in this scenario must
be ‘omni’ type. CellAmericas supplies the professional high-gain
omni-antenna for point-to-multipoint network.

8. Component for ISP outdoor long range Bridge as Back-bone - 1
WL PG-5822, 22-dbi parabolic antenna
Under Bridge Mode : as the data ‘backbone’ for connecting node to node.
Via the CAT5 cable, it is connected to the node Access Point (AP), WL-2410/AP
And then the WL-2410/AP will blanket the clients (WEC/CPE) in this node/area.

9. Component for ISP outdoor long range Bridge as Back-bone - 2
WL PG-2524, 24-dbi parabolic antenna
Under Bridge Mode : as the data ‘backbone’ for connecting node to node.
Via the CAT5 cable, it is connected to the node Access Point (AP), WL-2410/AP
And then the WL-2410/AP will blanket the clients (WEC/CPE) in this node/area.

10. Component for ISP outdoor long range Access Point
WL-2410GM/AP
1 Watt, Outdoor unit
with Omni-antenna, 15-dbi

11. Component for ISP outdoor long range WEC/CPE 1
WL-2410GM/CPE
1 Watt, Outdoor unit
with Grid-antenna, 24-dbi

12. Component for ISP outdoor long range WEC/CPE 2
WL-24005G/CPE
100 mW, Outdoor unit
with 15-dbi flat-panel antenna

13. Component for ISP indoor long range WEC/CPE 3
AID-2401SUPER G/CPE
200 mW, Indoor unit
with external 13-dbi Yagi antenna

14. Component for ISP indoor long range WEC/CPE 4
AID-2401 SUPER G/WEC unit 200mW
With rubber omni, 3-dbi
antenna for Mobile application (can do roaming among AP’s)
Existing mold as OPTION

15. Component 5
G4100 Network Administrator for client authentication and management.
1200 subscriber account 500 users on-line simultaneously DHCP server Authentication User Management Traffic Report Current Status Monitoring Firewall Route re-Direction and Extension Service Expansion Bandwidth management Billing……

16. CellAmericas Enterprises, Inc
WiFi
Innovation
Thank you !
CellAmericas Enterprises, Inc
Tel :
Fax :
David Gould, President