1. Stresses, Faults, Folds, and Earthquakes

2. Types of Stresses on Layers of Rocks:

3. Types of Folds Anticline- an upward fold in the rock Syncline- a downward fold in the rock
Syncline “sinks”
Syncline
Anticline folds up like a capital “A”
Anticline

4. Syncline
Anticline

5. 4 Types of Faults Fault- A break in the Earth’s surface where movement occurs.

6. Hanging Wall and Footwall
Hanging Wall (HW)- The piece of rock that is wider at the top, where your head would be located in the elevator.
Footwall (FW)- The piece of rock that is wider at the bottom, where your feet would be located in the elevator.
***You can “walk” up the footwall

7. Normal and Strike-Slip Faults
Normal Fault- Tension pulls rock apart and the HW moves down and the FW moves upward.
Strike-Slip Fault- Shearing pushes and pulls two rocks layers past each other without any upward or downward motion.
NORMAL FAULTS
STRIKE-SLIP FAULTS

8. Reverse and Thrust Faults
Reverse Fault- Compression forces the HW upward and the FW downward.
Thrust Fault- compression creates a reverse fault in which the HW slides at a very low angle over the FW.
COMPRESSION FAULTS

9. Strike-slip Fault
Stress= Shearing

10. Reverse Fault
Stress = Compression

11. Normal Fault
Stress = Tension

12. PRACTICE IDENTIFYING FAULTS

13. Reverse, Normal, or Strike-Slip Fault?
Normal Fault
Tension
Hanging Wall Sinks Down

14. Reverse, Normal, or Strike-Slip Fault?
Strike-Slip Fault Shearing Horizontal Movement of Layers

15. Reverse, Normal, or Strike-Slip Fault?
Reverse Compression Hanging wall is pushed up

16. JAPAN QUAKE’S FAULT LINE
The earthquake occurred along this convergent plate boundary where subduction happens (convergent boundary).
What type of stress/fault is occuring here?
Elastic Rebound
Tsunami Formation

17. Earthquakes

18. EARTHQUAKES

19. Focus and Epicenter
Fault- A break in the earth’s crust where movement occurs.
Focus- the origin of an earthquake underground.
Epicenter- the point on the earth’s surface directly above the focus of an earthquake.

20. Earthquake Waves
Primary Wave- waves that move through Earth by causing particles in rocks to move back and forth in the same direction. (compressionial waves)
Primary wave move twice a fast as secondary.
Primary waves can travel through liquid or plastic materials as well as solids- but the speed changes as it travels through solids.
Secondary Waves- wave that move through the earth by causing particles in rocks to move a right angles to the direction of the wave. ( up and down motion)
Secondary waves can travel through plastic or solid materials but NOT liquid.
COMPARE P WAVES AND S WAVES

21. Interior of the Earth and Seismic Waves
P Waves can travel through both solids and liquids
S waves can travel through solids but not liquids.
Based on the speed, direction and angles of the waves, we can determine the consistency of the interior of the Earth!
Shadow zone- areas on Earth (opposite to origin of quake) where no P or S waves are felt.
Shadow Zones

22. Surface Earthquake Waves
Surface waves usually follow the P and S wave, traveling along the land surface like water waves. There are several types of surface waves; the two most important are Raleigh waves (R) and Love waves (L) , named for the scientists who first identified them.
A. Raleigh Waves-The R waves move continuously forward, although the individual particles move vertically in an elliptical path
Love Waves- The L waves also travel forward, but the individual particles move back and forth horizontally.

23. How do we measure earthquakes?
**The original (less used today) scales**
Richter Scale
Mercalli Scale
-Created by Charles Richter in 1934.
-This scale measures earthquakes based on the largest seismic wave recorded during a quake.
-The scale is from Every whole number up on the scale represents an increase in energy of ten times more.
-The original scale used to measure quakes. Created in 1902 by Giuseppe Mercalli.
-Considered less accurate, because it uses eyewitness observations of damage to estimate the intensity of the quake.
MERCALLI SCALE

24. Moment Magnitude Scale
**This is the most used scale today**
-Introduced in 1979 in order to be more accurate than the Richter and Mercalli Scales, because its based on physical features of the quake instead of recordings using instruments.
-Measures earthquake strength based on the amount of energy released. This amount is calculated by analyzing the physics of the earthquake.
-The moment magnitude scale is preferred over the Richter scale by seismologists because it is more accurate.
-In simple terms, this scale multiplies the area of the fault surface and the distance the Earth moves along the fault to calculate the magnitude.
Earthquake
Richter Scale
Moment Magnitude
New Madrid, MO, 1812
8.7
8.1
San Francisco, CA 1906
8.3
7.7
Prince William, AK 1964
8.4
9.2
Northridge, CA,1994
6.4
6.7

25. Famous Earthquakes 1) Anchorage, Alaska - March 27, 1964
-This is the most powerful U.S. earthquake in recorded history.
-It registered as a 9.2 on the Richter scale.
-The rumbling lasted nearly 5 minutes.
-Ground fissures, collapsing buildings, and an ensuing tsunami killed over 130 people.
2) San Francisco, California – 1906
-Significant earthquake in that it was one of the first instances where scientists were able to record information on seismic waves.
-Caused approximately $400,000,000 of damage (at the time)
-Several eye-witness accounts refer to the movement of the roads to be similar to the undulation of waves in the ocean.
-Fires raged on for days, and S.F. had to be rebuilt.

26. Famous Earthquakes 3) Indian Ocean – December 26, 2004
-9.2/9.3 magnitude earthquake, making it one of the most powerful ever recorded on Earth.
-The infamous tsunami that ensued killed over 200,000 people.
-Released an amount of energy 1502 times more powerful than the Hiroshima atomic bomb.
4) Chile – May 22, 1960
-The most powerful earthquake ever officially recorded at a magnitude of 9.5.
-The damage is estimated to be at over 3 billion dollars, and nearly 6,000 killed.
-Once the red slab that is “stuck” finally gives way, this is when the earthquake occurs. The recoil of the plate causes the energy to be released.

27. Tsunami
A series of waves that occurs when the ocean is disturbed by earthquakes, underwater explosions or impacts.
12/26/04- Southeast Asia experienced a large scale earthquake along the Ring of Fire that created a series of tsunamis that killed 225,000 people and displaced over 1.2 million people! The tsunami slammed into the coasts of several nations within two hours after the quake.
tsunami animation