1. Group ID:May11-23 Client: Dr. Stephen Gilbert Advisor:Dr. Daji Qiao Members: Kyoung-ho Lim, Michael Gledhill, Michael Patterson, Ryan David, Travis Munn

2. Develop a system that can capture a video with 360 o coverage and wirelessly transmit that video to a remote base station in real-time. 2/24

3. There does not exist a solution which satisfies all of the following requirements: Simultaneous 360 o video capture Wireless transmission Real-time video feeds Inconspicuous design Portable design 3/24 http://www.0-360.com/ http://www.immersivemedia.com/products/capture.html

4. Project Plan Design Document Physical Prototype of system Documents describing testing of various components and reasoning behind design decisions Results of testing the final prototype 4/24

5. Possible Uses: Endless Any environment in which a head piece of some kind is used Intended Use: Military Application Used for training exercises and combat scenarios Intended Use: Commercial Real Estate Used for virtual tours of property development 5/24

6. Technology Assumptions Commercial Cameras Commercial Transmitters Network Protocol Hardware and Software Our Assumptions have remained constant throughout our research and design process. 6/24

7. Inconspicuous and light Video Quality Computing Power is minimal Larger Bandwidth needs Network Range 7/24

8. Integration Battery Failure Wireless Signal Quality Camera View Coverage 8/24

9. 9/24

10. The Pack ADC USB 802.11 n 10/24

11. Capability of video capturing with camera The cameras must be able to capture 360˚ horizontal coverage. Capability to transmit video signals System must be able to wirelessly transmit all video feeds over a range up to 50-100 meters. Video streaming must be as close to real-time as possible. Capability to receive and display video footage System must include a base station with software to display the collected video feeds. Mobility of power supply Battery must last 4-8 hours under standard operational load. Battery must be small and light enough to carry and wear. 11/24

12. PartSourcePurposeCost Qty. PC823XP Wide Angle Camera SuperCircuits www.supercircuits.com Video capture$79.994 Camera battery SuperCircuits www.supercircuits.com Powers the cameras $89.991 SVG3 USB Video Capture Device SuperCircuits www.supercircuits.com Analog to digital signal conversion $49.994 BeagleBoard XMDigi-Key www.digikey.com Processing, facilitate networking between devices $179.001 BeagleJuice Liquidware www.liquidware.com Powers the BeagleBoard $88.731 TEW-664UB Dual-band 802.11n wireless transmitter TrendNet Transmit video streams $41.241 TEW-639GR 300Mbps Wireless N Router TrendNet Receive video stream $89.991 < 12/24

13. The PC823XP Camera Array 90-100 degrees of coverage each Four total Analog output Low power consumption (3.6 watts) 12v Li-Ion Battery Pack Over 12 hours of battery life 13/24

14. SVG3 USB Video Capture Array Converts analog signal to digital Outputs 30 frames per second Output format is uncompressed AVI Four total, one for each camera 14/24

15. BeagleBoard XM Small form factor 1 GHz Cortex processor 512 MB RAM 4 USB 2.0 interfaces Low power consumption BeagleJuice Battery Pack Over 6 hours of battery life 15/24

16. Software Dependent on operating system Linux Ubuntu V4L (Video for linux) Many different options Windows CE Still exploring options 16/24

17. Wireless 802.11 n Dual Band Optimal Bandwidth of 300 Mbps Meets the required range of 50-100 meters USB 2.0 interface Wireless 802.11 n Dual Band Router 17/24

18. For purposes of testing hardware components, we will start with a simple VLC client. If time permits, we may build a simple client interface. However, this is not required as part of our project, and an advanced interface will likely be designed by a graduate student at a later date. 18/24

19. ItemTotal Cost PC823XP Wide Angle Camera$319.08 Camera Battery$89.99 SVG3 USB Video Capture$199.96 BeagleBoard-XM$179.00 BeagleJuice$88.73 TEW-664UB Dual-band 802.11n wireless transmitter $41.24 TEW-639GR 300Mbps Wireless N Gigabit Router$89.99 Total$1007.99 19/24

20. Individual Camera FOV Torture test of batteries Wireless range Video delay/synchronization Integrated Compatibility Data throughput Usability 20/24

21. Budget Total initial budget: $2500 Current cost estimate: ~$1000 $1500 under budget if all goes according to plan Time Individual weekly commitment is estimated to be an average 10 hours per week. Total man hours are estimated at 1500 (300 hours per group member) 21/24

22. Schedule We have been consistently on, or slightly ahead of schedule. Week23-Aug30-Aug6-Sep13-Sep20-Sep27-Sep4-Oct11-Oct18-Oct25-Oct1-Nov8-Nov15-Nov22-Nov29-Nov6-Dec13-Dec Project Plan *** Establish *** Research *** Design *** Hardware *** Initial Parts List *** Hardware *** Parts Evaluation *** Final Parts List *** Order Hardware *** Shaded area depicts original estimate schedule while *** area depicts actual schedule. 22/24

23. Research Hardware - complete Software – infancy state Hardware Decided on parts list Majority of hardware ordered Software Research state 23/24

24. Everyone Documentation, Research, Testing Kyoung-ho Lim (Research Head) Power options, ADC, Cameras Michael Gledhill (Manager) Mobile Computing, Software (Compression), Wireless Transmission Michael Patterson (Scribe) Mobile Computing, Display Options Ryan David (Webmaster) Wireless Transmission, Power options Travis Munn (Communications) Mobile Computing, Client Communications 24/24

25. Questions?