1. Coating schemes for different areas Waterproofing of Terrace Application Procedure: General: STEP 4 Clean, dust free surface, ready for application of polymer based elastomeric coatings STEP 5 Application of 1 st layer of Meta-Proof-709 thermo plastic elastomeric polymer based waterproofing coat STEP 6 Filling of all small pits & cracks by Meta-Proof-716 mortar with the help of float and also leveled the same STEP 1 Surface condition before commissioning of the work STEP 2 Rectification of all major cracks & leveling of uneven surface with the help of water based polymer & cement STEP 3 Finishing of the surface after rectification

2. Coating schemes for different areas Waterproofing of Terrace Application Procedure: General : STEP 7 Removal of if any moisture on the implicated surface with the help of hot air STEP 8 Cutting the glass fiber sheet as per required dimension where the sheet shall be laid & roll it STEP 9 Application of 2 nd layer of Meta-Proof-709 thermo plastic elastomeric polymer based waterproofing coat below the glass fiber sheet STEP 10 Spreading of 3 rd layer OF glass fiber sheet over the 2 nd layer of Meta-Proof-709 STEP 11 Application of 4 th layer of Meta-Proof-709 thermo plastic elastomeric polymer based waterproofing coat over the glass fiber sheet STEP 12 Application of 5 th layer of Meta-Proof-716 mortar with the help of float

3. Coating schemes for different areas Waterproofing of Terrace Application Procedure: General: STEP 13 Surface after application of 5 th layer of Meta-Proof-716 mortar with the help of float STEP 14 Application of 6 th layer of Meta-Proof- 716 mortar with the help of float STEP 15 Application of 7 th layer of Meta-Proof-709 thermo plastic elastomeric polymer based waterproofing coat over the Meta-Proof-716 mortar by spraying the silica sand of grade M80 or M100 over the surface of sixth coat in wet condition in case of sandwich application over the coatings

4. Coating schemes for different areas Waterproofing of Terrace Application Procedure: General: STEP 15 Kotta / Shahabadi tiles laid over the surface of 7 th coat or Application of 8 th layer of Meta-Proof- 709 Top thermo plastic elastomeric polymer based ultra violet (U. V.) resistant coat over the 7 th layer