1. How to print photographic quality images from your Kyocera Mita color printer

2. Step 1: The Print Screen As printer drivers sometimes differ, please make sure you make the following selections in “Properties” from the File > Print window: 1)Print to thick paper (even if you are using glossy paper that is not thick) 2)Set print quality to picture image or photo

3. Step 2: Preparing the Printer Once you have selected the proper settings in the print driver, open the Multi Purpose Tray and place the desired paper into it.

4. Step 3: Interaction with Printer After you have printed the document from your computer, the color printer panel will beep and blink Please check the LCD for errors. If no errors are present, press Go LCD Go button

5. Step 4: Media Selection Page 1 If the photo peals from the page or there exist white spots in your print, you are not using the proper paper or missed a selection in Steps 3 or 4. You can use a wide variety of papers. ?

6. Step 4: Media Selection Page 2 Papers that were tested at Tigerville Elementary and worked well are: 1)HP 32# bond glossy photo imaging paper coated 2 side (Item#Q6545A) 2)Kromekote high gloss laser paper, 8pt/48# bond, coated 1 side 3)Futura Laser Gloss, 40# bond/100# text, coated 2 side 4) Mohawk Color Copy Gloss, 60# cover/66# bond)

7. Rules of Thumb for other papers In general, the better the paper, the more it will cost. The brighter or whiter the paper, the better the print will look. Make sure any paper that you use is specified for LASER PRINTERS. Paper can be purchased over the internet for very good prices.