1. Created By: Kevin Pace For Virginia Beach City Schools

2. Welcome to SRC Robotics Module 1. This module has been developed to take the student through the step by step process for building and testing the circuit boards needed to run your robot at the SRC event!

3. There will be 4 modules in the set which are to be used to support the instruction of robot development for the SRC event. Module 1: Circuit Board Construction and Testing. Step by step instructions for building and testing the Transmitter and Receiver Propeller control boards. Module 2: Learning how to Program with the SPIN language! Step by step instructions for connecting the robot control boards you have built to a breadboard to experiment with Propeller programming. Module 3: Incorporating Science, Technology, Engineering and Math into your robot development. Ideas and activities to help you build your best robot ever! Module 4: Tips and techniques for applying problem solving and critical thinking into your robot design. From programming solutions to mechanical modeling tips..

4. Each module will be broken down into parts and each part will begin with a TITLE slide in YELLOW TEXT that will help you discover what is in the next section. These parts of each module will be numbered and lettered with the following system; RM1A – Robotics module 1 Part A. RM1B – Robotics module 1 Part B. As we go through the Modules…. RM2C – Robotics module 2 Part C. Or RM3E – Robotics module 3 Part E. (You get the idea!) This will help you and help your instructor as you refer to the slideshow and are looking for help!