1. Disk Formatting

2. Disk Formatting
Two formatting procedures required before you can write user data to a disk
Physical or low-level formatting
Logical or high-level formatting

3. 1. Low-Level Formatting – Manufacturer
Steps for storing data
1. Low-Level Formatting – Manufacturer
Low-level formatting is the process of outlining the positions of the tracks and sectors on the hard disk, and writing the control structures that define where the tracks and sectors are. This is often called a "true" formatting operation, because it really creates the physical format that defines where the data is stored on the disk.

4. Low-Level Formatting This is the basic setup of the disk layout
Dividing the disks tracks into a specific amount of sectors
Creating header & trailer information
Lays basic ground work of the formatting

5. High-Level Formatting
High-level formatting is the process of writing the file system structures on the disk that let the disk be used for storing programs and data.
OS writes the structures necessary for managing files & data on the disk

6. Partitioning
Creating a partition on a hard drive enables it to support separate file systems, each in its own partition
Each file system can then use its own method to allocate file space in logical units called clusters or allocation units

7. Common file systems used by OS
FAT 16 (File Allocation table 16-bit)
FAT 32 (File Allocation Table 32-bit)
NTFS (NT File System)

8. Data structures Enable OS to: Manage the space on the disk
Keep track of files
Manage defective areas so they don’t cause problems

9. High-level formatting
Creating of the “table of contents”
Low-level formatting is the physical formatting of the drive

10. File systems
In this section, it is important to differentiate between the FAT file system and the file allocation table (FAT).
FAT is the name of the file system used by DOS operating systems (DOS and Windows 95, as well as Windows NT and OS/2 which support it).
Operating system Associated file system DOS FAT16Windows XPNTFS Windows 98 FAT32Windows 95FAT16 - FAT32 (for version OSR2)Windows NTNTFSOS/2HPFSLinuxLinux Ext2, Linux Ext3

11. Master Boot Record or MBR
The boot sector (called the Master Boot Record or MBR) is the first sector of a hard drive (cylinder 0, head 0, sector 1), it contains the main partition table and the code, called the boot loader, which, when loaded into memory, will allow the system to boot up.

12. The Expanding Windows Family
Windows 2000 series
Windows 9x
Windows XP

13. Microsoft Windows 98 Introduced in 1998
The first version of Windows to take advantage of Plug and Play technology ( H/W meeting the plug and play requirements is automatically detected and configured by the O.S after installation)
Introduced a new generation of support tools (maintenance wizard that allows users to schedule automatic execution of disk defragmentation and other routine)
Closely integrated the browser for the Internet with the operating system (OS)

14. Microsoft Windows Millennium Edition (Me)
Introduced in the third quarter of 2000
Designed for home and general office use
It continuous the trend in windows development toward improved ease of use, ease of maintenance, and support for the newest PC H/W.
Closely linked to the Internet
Includes several new features and improvements ,
Hardware requirements geared to the typical home PC
Can be installed by the average end user.

15. Microsoft Windows NT
OS designed for power users ( using computers for scientific and technical applications)
Has a completely different OS than Windows 9x ( faster performance, advanced security, ability to operate with a number of different processor families).
Available in Workstation and several Server editions
Microsoft Windows NT 3.1 released in 1993 and Microsoft Windows NT 3.51 in 1995
Microsoft Windows NT 4.0 released in 1996; incorporated an interface very similar to that of Windows 95

16. Microsoft Windows 2000 successor to Windows NT
Windows 2000 combines the best of windows 98 and windows NT.
It offers and extends the multiprocessor support , advanced security and administration tools, NTFS file system.
Family of four products:
Windows 2000 Professional
Windows 2000 Server
Windows 2000 Advanced Server
Windows 2000 Datacenter Server

17. Windows 2000 Professional:
- the desktop version of the this O.S - designed for the single user. - It Supports dual CPU. - NTFS5 support.
NTFS5
Windows 2000 server: - replacing windows NT server. - it extends SMP (symmetric multiprocessing) to 4 CPU’s per machine. - It adds support for active directory service. (check the website) - It offers file, print and web services in networks.

18. Windows 2000 Datacenter server:
- The most advanced networking platform offered by Microsoft. - designed for large data warehouse, advanced scientific and engineering applications .

19. System Requirements Compared

20. System Configuration Considerations
The amount of random access memory (RAM) and processing power needed depend on the system usage.
A graphics adapter and RAM improves the display performance.
You need sufficient hard disk drive space for the OS, applications, and upgrades.

21. Plan the Installation
Windows 98 and Windows 2000 have automated setup programs.
You should follow a checklist during setup for optimal results.
Installation is complete when the system is tune (song), all hardware is working, and applications are ready to use.

22. Installation Planning Overview
Decide on the boot methods.
Confirm hardware requirements and compatibility.
Choose between an upgrade or a clean install.
Back up data and key files.
Remove or disable conflicts and verify existing settings.
Prepare the hard disk drive and file system.
Partition the hard disk drive with fdisk.

23. Decide on the Boot Methods
More than one OS can be installed on the same computer.
Dual boot installations require you to complete all setup steps for each OS.
Ensure that one installation doesn’t damage the other, that file systems are compatible, and that all hardware devices and software required by each O.S are properly accessible.
You should draw up a compatibility list and note special requirements.
Installation of Windows over existing Linux corrupt the Linux Boot Loader

24. Windows 2000 Dual Boot Considerations
Each OS must reside on a different partition.
Applications must be installed on each OS.
When setting up either an MS-DOS or Windows 95 and Windows 2000 Professional dual boot system, Windows 2000 Professional must be installed last.
If you are using a dual boot machine in a windows NT domain or windows 2000 Active directory network, each OS must have its own machine name in a domain environment.

25. Windows 98 Dual Boot Considerations
Drive C must be a FAT16 partition and include enough free space for the Windows 98 installation.
The two OSs must reside in different partitions or on different hard disks.
Dual boot systems combining Windows 98 and Windows NT are not recommended because the two O.Ss do not use the same registry settings or device drivers .
Dual booting Windows 98 and Windows 95 is not possible because both O.S use the same boot file and the second installation will overwrite the first.
Windows 98 cannot access files on NT file system (NTFS) partitions, and Windows NT cannot access files on FAT32 drives.

26. Confirm Hardware Requirements and Compatibility
Ensure that system components meet or exceed system requirements.
Choose hardware from the hardware compatibility list for Windows 2000.
(2000)
(XP)
Choose hardware that is certified to work with Windows 98 and Windows Me.

27. Update Firmware or Components
Check the system basic input/output system (BIOS) and update it if necessary before installation.
BIOS updates can reduce problems and increase performance.

28. Choose Between an Upgrade or a Clean Install
A clean install is done on a new or newly formatted hard disk.
An upgrade adds new components and updates existing ones.
The /CHECKUPGRADEONLY option performs a dry run install and reports any possible conflicts. (window 2000)

29. Record Information and Back Up Data and Key Files
Create a written record of system configuration and network settings.
Back up all configuration files and custom Registry entries.
When performing an upgrade from Windows 95, use Device Manager or Windows NT Diagnostics to print a report of all device and system configurations.
How to print the system settings in Window XP?
Back up all data files, batch files, and user profile files.

30. Remove or Disable Conflicts and Verify Existing Settings
Antivirus programs, third-party memory managers, terminate-and-stay-resident programs (TSRs), and legacy 16-bit drivers could interfere with the setup program.
You should ensure that third-party disk partitioning software can be used with the version of Microsoft Windows you are installing.
When upgrading an OS with CONFIG.SYS and AUTOEXEC.BAT, you should remove any unwanted 16-bit or legacy entries.
Upgrades work best when you upgrade in the same product series.

31. Prepare the Hard Disk Drive and File System
If the primary drive is already partitioned using the desired file system, you can proceed to the OS setup.
If you will use FAT16 or FAT32 and need to create or change partitions, you must use the fdisk utility to prepare the drive.
Fdisk can delete all data on the disk, so back up data first.
No third-party disk management utilities should have been used to partition the drive.

32. Partition the Hard Disk Drive with Fdisk
Windows 98, Windows 95, and all versions of MS-DOS provide fdisk.
You should use the same fdisk version as the OS you are installing.
FDISK is the command you use to run the fdisk utility.
To enable FAT32, you must answer Yes to enabling large drive support.
Fdisk options include creating and deleting a partition, setting the active partition, displaying partition information, and choosing a drive.

33. Using Fdisk—Step-By-Step
Display partition information to verify that you are on the proper drive.
Delete any non–DOS partition.
Delete extraneous logical drives in the extended MS-DOS partition.
Delete the extended partition.
Delete the primary DOS partition.
Mark a partition as the primary partition and set it as active.
Reboot the system, and then format the partition.

34. Introduction to Windows XP Professional
Prerequisites for installing Windows XP Professional.
Installing Windows XP Professional.

35. Prerequisites for Installing Windows XP Professional
Check hardware requirements.
Check hardware compatibility.
Check hardware configuration.
Test workstation hardware.

36. Check Hardware Requirements
The minimum requirements for installing Windows XP Professional include:
An Intel Pentium/Celeron family or AMD K6/Athalon/Duron family 233 MHz processor.
64 MB of RAM.
At least one hard disk where the systemroot (usually C:\WINNT) can be located on a partition.
At least 1.5 GB of hard disk space.

37. Check Hardware Requirements
The recommended requirements for installing Windows XP Professional include:
A PC with a 300 MHz (single or dual) processor.
128 MB of RAM.

38. Check Hardware Compatibility
The Windows XP Professional installation CD, running on an upgradeable Windows version, includes options to check for system compatibility.
It is essential that the service packs for Windows NT 4.0 Workstation or Windows 2000 Professional are installed, if XP is upgraded from either of these operating systems.
Service pack is an update to the operating system made available by a Microsoft

39. Check Hardware Compatibility
Windows XP compatibility verification option

40. Check Hardware Compatibility
Windows XP automatic compatibility verification option

41. Check Hardware Compatibility
Compatibility check using Web site:
The Microsoft Web site provides users with a Hardware Compatibility List (HCL) for the system.
It is essential to check all the hardware in the system prior to installing Windows XP Professional.

42. Check Hardware Configuration
Microsoft recommends a CD-ROM or DVD drive for installations.
A super VGA display adapter that supports an 800x600 resolution, and the most recent version of the workstation operating system software is also required.

43. Check Hardware Configuration
Microsoft also recommends a mouse or any other pointing device.
A high-density 3-½ inch floppy drive is required if floppy disks are used for installation.

44. Test Workstation Hardware
The DOS FDISK command is used to rebuild the hard disk drive prior to the installation.
The hard disk can be re-built while installing Windows XP from the CD.

45. Installing Windows XP Professional
Windows XP can be installed over a network using either a shared network drive or a set of bootable floppy disks.
Windows XP Professional Setup

46. Installing Windows XP Professional
List of existing partitions and unpartitioned space on the computer

47. Installing Windows XP Professional
Formatting the new partition

48. Installing Windows XP Professional
Windows XP requires the following inputs:
The user’s name and the organization’s name.
The 25-character product key code.
The computer name and the password for the workstation administrator account.

49. Installing Windows XP Professional
Networking Settings

50. Installing Windows XP Professional
Windows XP requires the following inputs (continued):
The workgroup or the domain name.
The user name and password of the user who is authorized to join the computer to the domain.

51. Installing Windows XP Professional
Windows XP Professional desktop

52. NTFS5
NTFS 5 is more robust and the one you want to deploy whenever planning for Active Directory. Strongly consider using only NTFS partitions on production server machines! NTFS 5 brings new benefits to Windows Server systems, including: disk quotas, file system encryption, dynamic volumes and remote storage capabilities.

53. NTFS Features
Disk quotas are used to restrict the amount of space that network and system users are allowed to save to disk.
file system encryption, which allows systems administrators to encrypt data in case it is stolen or intercepted by an unauthorized user.
Dynamic volumes are also specific to NTFS 5. Dynamic volumes are used to add protection for your Windows Server 2003 system.
Remote storage features supported by NTFS 5 to automatically off-load rarely used data to tape or other devices , but the files remain available to users because they haven't been removed from the machine -- it's seamless. As you can see, NTFS 5 brings a greater level of flexibility, security, data protection, increased scalability, and increased uptime.
GO BACK

54. Chapter Summary
The Windows family of OSs includes a variety of products tailored for different environments.
Windows 2000 is the most robust version of Windows.
Proper planning and system preparation are critical.
Windows 2000 installation requires more careful planning than does Windows 98.
The Windows 98 and Windows 2000 installation processes are somewhat similar.
Windows provides tools for troubleshooting installation problems.
Additional tasks are required after installation is complete.