1. KELDRICK W. APRIL-20-11

2. Power plant  Prevent blackouts by inspecting power plant equipment and ordering repairs when necessary What do they do?

3. Power plant  Bus and truck mechanics and diesel engine specialists  Computer-controlled machine tool operators, metal and plastic  Stationary engineers and boiler operators  Gas plant operators  Petroleum pump system operators, refinery operators, and gaugers  Gas compressor and gas pumping station operators

4. Power plant  Operators who work in control rooms generally sit or stand at a control station. This work is not physically strenuous, but it does require constant attention. Operators who work outside the control room may be exposed to danger from electric shock, falls, and burns.  Nuclear power plant operators are subject to random drug and alcohol tests, as are most workers at such plants. Additionally, they have to pass a medical examination every two years and may be exposed to small amounts of ionizing radiation as part of their jobs.  Because electricity is provided around the clock, operators, distributors, and dispatchers usually work one of three 8-hour shifts or one of two 12- hour shifts on a rotating basis. Shift assignments may change periodically, so that all operators share less desirable shifts. Work on rotating shifts can be stressful and fatiguing because of the constant change in living and sleeping patterns.

5. Education and Training  Employers often seek recent high school graduates for entry- level operator positions. Workers with college or vocational school degrees will have more advancement opportunities, especially in nuclear power plants. Although it is not a prerequisite, many senior reactor operators have a bachelor’s degree in engineering or in the physical sciences.  Workers selected for training as power plant operators undergo extensive on-the-job and classroom instruction. Several years of training and experience are required for a worker to become a fully qualified control room operator.  In addition to receiving initial training to become fully qualified as a power plant operator, most workers are given periodic refresher training, especially the nuclear power plant operators. Refresher training usually is taken on plant simulators designed specifically to replicate procedures and situations that might be encountered at the trainee’s plant.

6. On the Job power plant  Monitor and inspect power plant equipment and indicators to detect evidence of operating problems.  Adjust controls to generate specified electrical power, or to regulate the flow of power between generating stations and substations.  Operate or control power-generating equipment, including boilers, turbines, generators, and reactors, using control boards or semi- automatic equipment.  Regulate equipment operations and conditions, such as water levels, based on data from recording and indicating instruments or from computers.

7. Power plant Work  Collect oil, water, and electrolyte samples for laboratory analysis.  Make adjustments or minor repairs, such as tightening leaking gland and pipe joints; report any needs for major repairs.  Control generator output to match the phase, frequency, and voltage of electricity supplied to panels.  Place standby emergency electrical generators online in emergencies and monitor the temperature, output, and lubrication of the system.  Receive outage calls and call in necessary personnel during power outages and emergencies.  Examine and test electrical power distribution machinery and equipment, using testing devices.  Replenish electrolytes in batteries and oil in voltage transformers, and reset tripped electric relays.  Source: BLS