Download presentation
Presentation is loading. Please wait.
Published byJane Short Modified over 9 years ago
1
INDUCTION MACHINES M ODULE 1 Prepared by: Aswathy Mohandas P
2
I NTRODUCTION Three-phase induction motors are the most common and frequently encountered machines in industry simple design, rugged, low-price, easy maintenance run essentially as constant speed from no-load to full load called as asynchronous motors described as ―transformer type a.c machine in which electrical energy is converted into mechanical energy. Its speed depends on the frequency of the power source not easy to have variable speed control requires a variable-frequency power-electronic drive for optimal speed control 2
3
Advantages It has simple and rugged construction. It is relatively cheap. It requires little maintenance. It has high efficiency, good speed regulation and reasonably good power factor. It has self starting torque. Disadvantages It is essentially a constant speed motor and its speed cannot be changed easily. Its starting torque is inferior to d.c motors. 3
4
P ARTS OF INDUCTION MOTOR 4
5
C ONSTRUCTION Frame: It is the outer body of the motor. Its function are to support the stator core and winding, to protect the inner parts of the machine and serve as a ventilating housing or means of guiding the coolant into effective channels. Stator: It consists of a steel frame which encloses a hollow, cylindrical core made up of thin laminations of silicon steel. A number of evenly spaced slots are provided on the inner periphery of the laminations. 5
6
Rotor: The rotor consists of a laminated core, with slots cut on its outer periphery where windings are placed. The windings may be either of squirrel cage type or wound rotor type. The core is mounted on a steel shaft, provided with bearings on both sides and is supported on end covers attached to the main frame of the motor Shaft and bearings: The rotor shaft is supported by bearings housed in the end shield. 6
7
T YPES OF ROTOR 7
8
Squirrel cage rotorWound rotor 8
9
R OTATING M AGNETIC F IELD D UE TO 3-P HASE C URRENTS 9
10
At instant 1, ωt = 0°. Therefore, the three fluxes are given by, 10
11
At instant 2, ωt = 30°. Therefore, the three fluxes are given by, 11
12
At instant 3, ωt = 60°. Therefore, the three fluxes are given by, 12
13
At instant 4, ωt = 90°. Therefore, the three fluxes are given by, 13
14
SLIP 14
15
ROTOR CURRENT FREQUENCY 15
16
EQUATION FOR STATOR AND ROTOR EMF S 16
17
ROTOR CURRENT 17
18
18
19
19
20
ROTOR TORQUE 20
21
STARTING TORQUE 21
22
22
23
CONDITION FOR MAXIMUM STARTING TORQUE 23
24
TORQUE UNDER RUNNING CONDITION 24
25
25
26
26
27
MAXIMUM TORQUE UNDER RUNNING CONDITION 27
28
28
29
FULL LOAD, S TARTING AND M AXIMUM TORQUES 29
30
T ORQUE - SLIP CHARACTERISTICS 30
31
31
32
TORQUE – SPEED CHARACTERISTICS 32
33
EFFECT OF ROTOR RESISTANCE UPON TORQUE - SLIP OR TORQUE - SPEED CHARACTERISTIC 33
34
EFFECT OF CHANGE IN SUPPLY VOLTAGE ON TORQUE – SPEED CHARACTERISTIC 34
35
35
36
POWER STAGES IN AN INDUCTION MOTOR 36
37
37
38
38
39
I NDUCTION M OTOR T ORQUE 39
40
R OTOR O UTPUT 40
41
41
42
I NDUCTION M OTOR T ORQUE E QUATION 42
43
43
44
44
45
45
46
P HASOR D IAGRAM 46
47
47
48
48
49
49
50
50
51
C IRCLE D IAGRAM 51
52
52
53
53
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.