1. GDC Workshop Session 2 - DVR System 2003/11

2. Agenda DVR Product Overview (5 min) DVR Hardware Installation (30 min) System Major Functions Setup (50 min) Disassembly (20 min) Troubleshooting (10 min) Q & A

3. DVR Product Overview Team Members -James, Toby, Jam, Ralph, Sharon IEI DVR Series Product Line -VioGate-100/120, VioCard-100 Workshop Environment Introduction -Network DVR System

4. Workshop Introduction Network DVR System

5. DVR Hardware Installation

6. Install PTZ Camera Connector Install Emergency Button Input 1 Ground 1 Input 2 Ground 2 Input 3 Ground 3 Input 4 Ground 4 Input Connector POWER Ground DC 0.5~24V GroundInput NCNOCOM VioGate GPI Sensor

7. DVR Software Installation Use VioGate Finder to Search VioGate Support several types of network setting DHCP, Static IP, Broadband PPPoE Protocol Quick configuration Only 9 Steps, Easy to Setup

8. System Major Functions Setup User Management Basic/advance settings Monitoring, Playback, PTZ Camera Control, User Authority PTZ Camera Protocol Setting Recording Setting Continuous, Schedule Recording Primary/secondary storage Snapshot Setting Event Handling Motion detection-area setting, sensitivity, detection mode

9. System Major Functions Setup The warning system demo Motion detection trigger GPO Emergency button trigger GPO VioGate Master Software demo PTZ Camera Pre-Set Function Alarm Handling + E-map

10. Disassembly VioGate 100/120 Open top cover Capture card and GPIO daughter board Front fan Flash disk - IFM-401-16 RS-422/485 connector Main board - SBC Backplane Remove drive tray Remove power supply

11. Troubleshooting

12. Q & A