1. DEPT OF LABOR OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION OSHA STANDARDS

2. ALWAYS CONSULT BEFORE LOOKING FOR OSHA CODES OR CONSENSUS STANDARDS! APPLIES TO MILITARY, CIVIL SERVICE, AND NON-APPROPRIATED FUND (MCCS) CIVILIANS DISCUSSES: –UNIT RESPONSIBILITIES –COUNCILS & COMMITTEES –TRAINING REQUIREMENTS –INSPECTIONS –GUIDELINES FOR INSPECTIONS BY FEDERAL OSHA

3. HAS PROGRAM GUIDANCE FOR: LOCKOUT/TAGOUT ENERGY CONTROL LITHIUM BATTERY SAFETY ASBESTOS SAFETY HAZARDOUS MATERIALS CONTROL FALL PROTECTION ERGONOMICS BLOODBORNE PATHOGENS OFFICE SAFTY

4. Located within the Department of LaborLocated within the Department of Labor OSHA REGULATIONS –laws set forth by the Department of Labor Two general industry categories most applicable for Marine CorpsTwo general industry categories most applicable for Marine Corps –GENERAL INDUSTRY –CONSTRUCTION

5. PARAGRAPH NUMBERING SYSTEM 29 CFR 1910.110(b)(13)(ii)(b) liquefied petroleum code that discusses allowing temporary gas lines in buildings

6. OSHA STANDARDS BREAKDOWN Title - 29 Code of Federal Registration - CFR Part - 1910 Section -.110 First Digit - Lower Case Alpha (b) Second Digit - Arabic Number (13) Third Digit -Lower Case Roman (ii) Italicized-(b)

7. OSHA STANDARS PARAGRAPH NUMBERING SYSTEM Code of TitleFed RegPart Section 29CFR1910.110 Within the Section it is broken down into paragraphs

8. SECTION BREAKDOWN PARTSECTION 1910.110 (b) Lower Case Alphabetical First Tier of Paragraphs Beneath Section Level will be numbered in parentheses

9. SECTION BREAKDOWN 29 CFR 1910.110(b)(13)(ii)(b)(7)(iii) 1910.110(b) (13) Arabic Number The Second Tier of Numbering involves Arabic numbers between subheadings.

10. SECTION BREAKDOWN 1910.110 (b) (13)(ii) Lower Case Roman The Next Level uses the Lower Case Roman Numeral

11. SECTION BREAKDOWN 1910.110(b)(13)(ii) (b) Italicized Repeat the same paragraph numbering system, only italicize them.

12. OSHA CODE TERMINOLOGY Mandatory compliance –SHALL –WILL –MUST Recommended Compliance –SHOULD Optional Compliance –MAY –CAN

13. 29 CFR PART 1910 GENERAL INDUSTRY Applies to Most Industrial and Office Environments Excluding Construction Activities

14. GENERAL INDUSTRY STANDARDS Portable Welding MachinesPortable Welding Machines –29 CFR 1910.255 Walking & Working SurfacesWalking & Working Surfaces –29 CFR 1910.21 -.22 Overhead Gantry CranesOverhead Gantry Cranes –29 CFR 1910.179 Fire ExtinguishersFire Extinguishers –29 CFR 1910.157 ForktrucksForktrucks –29 CFR 1910.178

15. 29 CFR 1926 CONSTRUCTION Construction of buildings, roads, utilities Demolition of structures Excavation

16. CONSTRUCTION STANDARDS Excavation & TrenchingExcavation & Trenching –29 CFR 1926.651-652 Tools, Hand & PoweredTools, Hand & Powered –29 CFR 1926.300 -.305 &.951 Welding & CuttingWelding & Cutting –29 CFR 1926.350-.354 Chain SlingsChain Slings –29 CFR 1926.251 Earthmoving EquipmentEarthmoving Equipment –29 CFR 1926.602

17. WILLIAM STEIGER ACT PUBLIC LAW 91-596 OSHA ACT 1970 GENERAL DUTY CLAUSE EMPLOYER AGREES TO KEEP THE WORKPLACE FREE FROM RECOGNIZED HAZARDS

18. LET’S LOOK-UP SOME STANDARDS!