Basics (pcmag.com) Definition of: Ethernet The standard local area network (LAN) access method. A reference to "LAN," "LAN connection" or "network card" automatically implies Ethernet. Most new computers come network ready with Ethernet built in. For machines without a network connection, Ethernet adapters can be added via USB or PC Card or by plugging an Ethernet card into a free PCI bus slot inside the case.
Basics Megabits Per Second: 10, 100, 1,000 and 10,000 A 10/100 Ethernet port supports two speeds: 10 Mbps (10Base-T) and 100 Mbps (100Base-T). Computers also come with 10/100/1000 ports, which includes Gigabit Ethernet at 1 Gbps (1,000 megabits). Ethernet devices negotiate with each other and transmit at the highest speed possible. For high-speed backbones in metropolitan and wide area networks, 10 Gigabit Ethernet (10,000 megabits), the fastest Ethernet, is also used (see 10 Gigabit Ethernet). Shared or Switched Ethernet is wired in a star configuration with a hub or switch in the middle. Hubs, which predated switches, are shared media devices. All stations attached to the hub share the total bandwidth. Switches provide each sender and receiver pair with the full bandwidth and are significantly faster than hubs (see switched Ethernet). Like the client machines, Ethernet switches and hubs also support 10/100 and 10/100/1000 speeds. Collision Detection Ethernet uses the CSMA/CD technology to broadcast each frame onto the physical medium (wire, fiber, etc.). All stations attached to the Ethernet are "listening," and the station with the matching destination address accepts the frame and checks for errors. Ethernet is a data link protocol (MAC layer protocol) and functions at layers 1 and 2 of the OSI model.10 Gigabit Ethernetswitched Ethernet
Basic Equipments “SWITCH” and a “HUB”? A 10/100 mbps is a good choice these days for basic home networks. This kind of hub will allow you to hook up 10Mbps and 100Mbps devices and network cards on the same network. Furthermore, even if the devices communicate at different speeds, the hub will allow them to talk. Now that the prices have come down to under $50.00, the versatility and speed of these hubs can not be beat. 10/100 Ethernet Hubs are only half duplex - each client can only send OR receive data at a particular time. To take full advantage of your 10/100 Ethernet cards, look into an Ethernet Switch. A switch can operate at full duplex allowing your computers to send and receive at the same time. Ethernet switches allow your Ethernet cards to operate in Full Duplex mode instead of Half Duplex. Full Duplex means that you can be sending and receiving data at the same time. Switches also route traffic directly between ports instead of broadcasting traffic across all ports. This basically means that each port on a switch gets dedicated bandwidth instead of shared bandwidth. When transferring large files between multiple computers, this can make a big difference in how well your lan operates.
Routers A device that forwards data packets along networks. A router is connected to at least two networks, commonly two LANs or WANs or a LAN and its ISP’s network. Routers are located at gateways, the places where two or more networks connect.devicepackets networksLANsWANsISP’sgateways
ISPs, WAN, LAN ISP – Internet Service Provider – Verizon FIOS, DSL, Cable Internet, AOL WAN – Wide Area Network – The Internet, Two or more networks LAN – Local Area Network – Small local area, a home network for example
IP Address An IP address (or Internet Protocol address) is a unique address that certain electronic devices use in order to identify and communicate with each other on a computer network utilizing the Internet Protocol standard (IP)—in simpler terms, a computer address. Any participating network device—including routers, switches, computers, printers, Internet fax machines, and some telephones—can have its own address that is unique within the scope of the specific network. Some IP addresses are intended to be unique within the scope of the global Internet, while others need to be unique only within the scope of an enterprise.addresscomputer networkInternet Protocoladdressroutersswitchescomputersprinters Internetfaxtelephones
Connecting a network Order Internet from an ISP Wait for ISP order/service date – DSL, Cable, FIOS 1-2 weeks Self Install (DSL package) – DSL modem, CAT 5 cable, phone filters Professional Install (Cable, FIOS) – Modem, CAT 5 cable Connect to a computer to test the connection
Connecting a network Turn off computer, modem Connect all the computers to the router Turn on computers, modem, router Test Internet connect on computers Setup wireless network – Choose name – Choose security format – Connect wireless devices to Internet
What to set ? On/Off (Off if 1 PC or all device wired) SSID (name) (on or off) Channel – Use Auto or NOT 1, 6, 11 Security – WEP 64bit, 128bit (10 or 20 character long) Key 1-4 – WPA-PSK More secure, bit more work MAC-based access ? (both wired and wireless) – Use ipconfig to lookup – Stickers on the device
WAN Settings WAN – provided by ISP – Static / Dynamic Service – Static – always the same IP address More expensive Business, Organizations – Dynamic – changes IP address Standard Service Most home uses