1. Fall Protection TRAINING FOR THE COMPETENT, QUALIFIED AND AUTHORIZED PERSONS

2. SAFETY CULTURE

4. Compliance & Consultation

5. AZ RESIDENTIAL FALL PROTECTION TIME LINE *June 16, 2011ADOSH STD 03-11-2002 *June 17, 2011Industrial Commission of Arizona stayed enforcement *November 30, 2011ICA lifted the stay, effective Jan. 1, 2012 *March 3, 2012SB 1441 Signed by Gov. Brewer *March 19, 2014Federal OSHA sent letter to show cause *May 1, 2014SB 1307 passed with revisions *August 21, 2014Fed OSHA proposed rejection *February 7, 2015Fed OSHA rejected the State plan, enforcing 1926 sub M

6. FALL PROTECTION PROGRAMS

7. ANSI Z359.1Update

10. Body Belts – Restraint ONLY

11. C.A.Z.Controlled Access Zone

12. Holes & Openings

13. SKYLIGHTS

14. ROOF HATCH OPENINGS

15. SHARP EDGE & LEADING EDGE WORK

16. ANSI Z359.14 LEADING EDGE WORK a) The test weight is increased by roughly 30% to 282 pounds (128kg). b) The test edge material is very sharp metal with an edge radius of.005 inches (.13mm) or less. c) An energy absorber is required and must not be separable from the SRD device or lifeline. d) Testing is expanded to include “offset” testing that tests sliding of the lifeline along the edge. e) Specific testing includes a check on retraction when used horizontally to confirm no slack can develop. f) Markings on the device and use instructions have been expanded to provide advice to equipment users about leading edge work.

17. SELF RETRACTING DEVICES, LEADING EDGE (SRL-LE)

18. Competent & Qualified Persons

19. Engineering out the Hazard

20. HANDRAILS

21. Know Your ABC’s

22. ANCHOR POINTS

23. Engineered Anchor Point

24. Overhead Anchors

25. BODY HARNESS

26. Proper Fitting Harness

27. CONNECTORS

28. VERTICAL LIFELINES

29. Calculating Fall Clearance

30. SWING RADIUS

31. DECENT & RESCUE

32. Suspension Trauma

33. Rescue

34. AERIAL LIFTS

35. Overhead Obstructions

36. Manufacture’s Guidelines

37. Additional Fall Protection Systems

38. Lift Safety

39. Video

40. Housekeeping

41. ENGINEERED WORK PLATFORMS

42. Rolling Ladders / Stairs

43. WORKING SAFELY AT HEIGHTS

45. THANK YOU!