1. 1erColloque International sur Hydrocarbures, Energies et Environnement (HCEE) Ouargla les 23 et/24 Novembre 2014 Efficiency analysis of different photovoltaic module technologies under semi-humid climate conditions L AZHAR L ALOUI 1, M OHAMED B OUAFIA 1 1 Laboratory of Applied Optics, Optics and Precision Mechanics Institute, University Sétif 1 E-mail: Lalaoui_lazhar@hotmail.com, Bouafia_med@yahoo.fr ABSTRACT - In-situ analysis have been realized in order to investigate the efficiency of photovoltaic modules made by different technologies. The photovoltaic modules have been submitted to characterization tests (Flasher, and electroluminescence). The outdoor exposure of photovoltaic modules has allowed us to submit modules to semi- humid climatic conditions involving a complex combination of factors (solar radiation, wind, rain, heat…) causing degradation over time. Therefore, this combination of factors has an impact on the analyzed photovoltaic module efficiency. Using the measuring device PVPM 1000C100, different electrical characteristic of the photovoltaic module during exposure in natural site have been determined. Equipment and techniques Pve Photovoltaik Engineering (PVPM/1000C100) - Photovoltaic modules PV Bosch Solar Sc-Si M 60 m-Si PVTEC LLC-PV MU 235 pc-Si Electrical performance under standard test conditions STC 1000w/m² et 25°C P mpp [Wp]240 (–0/+4,99)235 (–0/+3%) V mpp [V]30.0028.9 I mpp [A]8.108.16 V oc [V]37.4037.2 I sc [A]8.608.68 η [%]15.7714.47 Dimension[mm]1660 x 990 x501680 x 1030 x 30 weight [Kg] 21 ConnectorMC4 Technique Flasher & Testing electroluminescence - Results & Discussion Flasher under STC 1000 W/m² AM1.5G T=25°C Modulem-Si M60 EU 30117p-Si LLC-PV MU 235 Reference#062#787#677#08#10#11 P mpp [Wc]239.51238.89239.50226.29229.58229.86 V mpp [V]29.5129.7029.5928.6528.7528.76 I mpp [A]8.128.048.097.907.99 V oc [V]36.7736.7836.8036.2936.2836.33 I sc [A]8.658.688.628.438.528.51 FF [%]75.3374.8775.4973.9774.2774.34 η [%]14.5714.5414.5713.6113.8013.82 Conclusion – The global objective of this work is the demonstration effect of the environment on the efficiency of PV modules, and analysis of various parameters that can contribute to the optimization of the energy efficiency. Depending on the environment, each technology has advantages and disadvantages, so to optimize PV performance, it is necessary to make a meteorological analysis on the geographical location. Through techniques of electrical and optical characterization of PV modules (Flasher, electroluminescence), we can determine actual electrical and mechanical faults located in solar cells, which may explain any decrease in photovoltaic efficiency. perspective in order to develop a standardization of photovoltaic modules working in arid and semi-arid conditions, and by in-situ analysis of photovoltaic efficiency, it’s necessary to install in arid site, to make a comparison between the influence of the two sites (semi- humid, arid). Results electroluminescence - Exposure test in semi-humid Site (PVPM/1000C100) - Module PV Bosch m-Si M60 EU 30117 (#677)Module PVTEC POLSKA LLC-PV MU 235 (#11) References: [1] Anne Labouret, Michel Villoz, " Energie solaire photovoltaïque ; Le manuel du professionnel " Edition DUNOD, Paris, 2003. [2] Wagner A. " Peak Power and Internal Series Resistance Measurement under Natural Ambient Conditions. " EuroSun Copenh. 2000. [3] Honsberg C. Bowden, Photovoltaics: Devices, Systems and Applications; Sydney (Aus) Univ. of New South Wales, 1998. [4] M. C. Alonso-Garcia, J. M. Ruiz, F. Chenlo, " Experimental study of mismatch and shading effects in the I-V characteristic of a photovoltaic module ", Solar Energy Materials & Solar Cells Volume 90, Issue 3, 15 February 2006, Pages 329-340. [5] Schulte K.M., Wagner A, « Die Effektive Solarzellenkennlinie. - Anwendung Teillast- Berechnung » ; Staffelstein, 2002