Download presentation
Presentation is loading. Please wait.
1
Linda R. Coney – 24th April 2009 MOM Update Linda R. Coney 7 September, 2009
2
Linda R. Coney – 7 Sept 2009 Outline Target Taking Data/Operations Documentation Electrical Continued Run Plan …..
3
Linda R. Coney – 7 Sept 2009 Target Operations & Data Taking See information by Paul Hodgson, Chris Booth, Paul Smith Many congratulations on a very well done job! Thanks to Malcolm for getting everything ready to run! Ran 12 hours Saturday & 16 hours Sunday Used 11,803 target pulses Target operation studies u Searching for ideal timing wrt ISIS cycle u Searching for ideal depth into beam u Found edge of beam at injection for purposes of understanding what we need to avoid on the outswing of our target u Took data with modified voltages Beam loss vs Particle Rate study u Fix target timing and adjust dip depth u Take data at 100 mV, 200 mV, 300 mV, 400 mV, 500 mV beam losses Pion beam at 333 MeV/c Proton beam at 333 MeV/c Muon beam at 252 MeV/c with Decay Solenoid and w/o
4
Linda R. Coney – 7 Sept 2009 Weekend Data Run 945 Sept 06 2009 pion beam 333 MeV/c with 400mV losses protons
5
Linda R. Coney – 7 Sept 2009 Weekend Data Run947_Sept062009_piBeam333MeVc_D2up5percent
6
Linda R. Coney – 7 Sept 2009 Weekend Data Run950_Sept062009_protonBeam333MeVc_D2nominal
7
Linda R. Coney – 7 Sept 2009 Decay Solenoid Muon Beam Run956_Sept062009_muBeam252MeVc_DS_ON_200pulses (L) Run957_Sept062009_muBeam252MeVc_DS_OFF_200pulses (R)
8
Linda R. Coney – 7 Sept 2009 Preliminary: Beam Loss vs Particle Rate Study first draft, means of distributions judged by eye, no error calcs, etc full analysis is to follow rates of beam loss seem very high because not yet been calibrated to nominals u last time the reduction factor was about 0.4, PH thinks more this time. unsure at present as to what units have for the GVA1 (why are no units for them, again to be sorted out for full analysis)
9
Linda R. Coney – 7 Sept 2009 Operations Rehearsal of running good idea Updated documentation very helpful u Still need a few updates Some trips of beamline magnets DAQ having some trouble with new fADCs u Working to sort this out now “invalid” alarms constantly going off on alarm handler extremely taxing/annoying
10
Linda R. Coney – 7 Sept 2009 Other Documentation DAQ Electrical in hall Installation of PID detectors u Would like TOF1 u KL What is our run plan for Machine Physics given all that was done this weekend??
Similar presentations
© 2024 SlidePlayer.com Inc.
All rights reserved.