1. Gases Chapter 5 Picture with cutout artistic effects (Intermediate)
To reproduce the picture effects on this slide, do the following:
On the Home tab, in the Slides group, click Layout and then click Blank.
On the Insert tab, in the Images group, click Picture.
In the Insert Picture dialog box, select a picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Format Picture dialog box launcher. In the Format Picture dialog box, resize or crop the image so that the height is set to 4.42” and the width is set to 10”. To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
On the Home tab, in the Drawing group, click Arrange, point to Align, and then do the following:
Click Align Top.
Click Align Center.
Under Picture Tools, on the Format tab, in the Adjust group, click Artistic Effects, and then click Cutout (fifth row, first option from the left).
Also under Picture Tools, on the Format tab, in the Adjust group, click Color, and then under Recolor click Washout.
In the Insert Picture dialog box, select the same picture and then click Insert.
Select the picture. Under Picture Tools, on the Format tab, in the Size group, click the Format Picture dialog box launcher. In the Format Picture dialog box, resize or crop the image to focus on the main subject in the picture. (Example is set to 4.5” and the width is set to 4.5”). To crop the picture, click Crop in the left pane, and in the right pane, under Crop position, enter values into the Height, Width, Left, and Top boxes. To resize the picture, click Size in the left pane, and in the right pane, under Size and rotate, enter values into the Height and Width boxes.
Also in the Format Picture dialog box, click Artistic Effects in the left pane, in the Artistic Effects pane, click the button next to Artistic Effect, and then click Cutout (fifth row, first option from the left).
Also in the Format Picture dialog box, in the Line Style tab, do the following:
In the Width box, enter 15 pt.
In the Cap type list, select Square.
In the Join type list, select Miter.
Also in the Format Picture dialog box, in the Line Color tab, click the button next to Color and click More Colors. In the Colors dialog box, on the Custom tab, enter values for Red: 35, Green: 36, and Blue: 22.
Also in the Format Picture dialog box, in the Shadow tab, click the button next to Presets, and then under Inner click Inside Center.
Also in the Format Picture dialog box, in the Glow and Soft Edges tab, under Glow, do the following:
In the Size box, enter 11 pt.
Click the button next to color and click More Colors. In the Color dialog box, on the Custom tab, on the Custom tab, enter values for Red: 158, Green: 152, and Blue: 38 (or any lighter color that compliments your picture).
Position the second picture over the matching area in the first picture.
To reproduce the shape effects on this slide, do the following:
On the Home tab, in the Drawing group, click Rectangle.
On the slide, drag to draw a rectangle.
Select the rectangle. Also on the Home tab, in the Drawing group, click the Format Shape dialog box launcher.
In the Format Shape dialog box, in the Size tab, enter 1.8” into the Height box and enter 10” into the Width box.
Also in the Format Shape dialog box, in the Fill tab, select Gradient fill, and then do the following:
In the Type list, select Linear.
In the Angle box, enter 90°.
Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.
Also under Gradient stops, customize the gradient stops as follows:
Select the first stop from the left in the slider, and then do the following:
In the Position box, enter 0%.
Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).
In the Transparency box, enter 100%.
Select the second stop from the left in the slider, and then do the following:
In the Position box, enter 100%.
In the Transparency box, enter 0%.
Also in the Format Shape dialog box, in the Line Color tab, select No Line.
Press and hold CTRL, and then select picture and rectangle. On the Home tab, in the Drawing group, click Arrange, and point to Align, and then do the following:
Click Align to Slide.
Click Align Selected Objects.
Click Align Bottom.
Also on the Home tab, in the Drawing group, click Rectangle.
Select the rectangle. Under Drawing Tools, on the Format tab, in the Size group, enter 2.82” into the Height box and enter 10” into the Width box.
Also under Drawing Tools, on the Format tab, in the Shape Styles group, click Shape Fill, point to Gradients, and then click More Gradients. In the Format Shape dialog box, click Fill in the right pane, select Gradient fill in the Fill pane, and then do the following:
In the Angle box, enter 90.
Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.
Select the first stop from left in the slider, and then do the following:
In the Position box, enter 0.
In the Transparency box, enter 0.
Select the second stop from left in the slider, and then do the following:
In the Position box, enter 30.
Click the button next to Color, and then click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 158, Green: 152, and Blue: 38.
In the Transparency box, enter 46%.
Select the third stop from left in the slider, and then do the following:
In the Position box, enter 100.
Also in the Format Shape dialog box, click Line Color in the left pane, and in the right pane click No Line.
Position the second rectangle below the first rectangle, about 1/3 from the bottom of the slide.
Select the second, color picture. On the Home tab, in the Drawing group, click Arrange, and then click Bring to Front.
To reproduce the text effects on this slide, do the following:
On the Insert tab, in the Text group, click Text Box, and then on the slide drag to draw your text box.
Enter text in the text box, and then select the text. On the Home tab, in the Font group, select Segoe Print from the Font list, and then select 36 pt. from the Font Size list.
Position the text box to the right of the second, smaller picture.

2. 5.1 Substances that exist as gases

3. Elements that exist as gases at 250C and 1 atmosphere

5. Physical Characteristics of Gases
Gases assume the volume and shape of their containers.
Gases are the most compressible state of matter.
Gases will mix evenly and completely when confined to the same container.
Gases have much lower densities than liquids and solids.
NO2 gas

6. 5.2 pressure of a gas

7. (force = mass x acceleration)
Area
Pressure =
(force = mass x acceleration)
Units of Pressure
1 pascal (Pa) = 1 N/m2
1 atm = 760 mmHg = 760 torr
1 atm = 101,325 Pa

8. 10 miles
0.2 atm
4 miles
0.5 atm
Sea level
1 atm

9. 5.1
Page 177
The pressure outside a jet plane flying at high altitude falls considerably below standard atmospheric pressure. Therefore, the air inside the cabin must be pressurized to protect the passengers.
What is the pressure in atmospheres in the cabin if the barometer reading is 688 mmHg?

10. Manometers Used to Measure Gas Pressures
closed-tube
open-tube

12. 5.3 The gas laws

13. Apparatus for Studying the Relationship Between
Pressure and Volume of a Gas
As P (h) increases
V decreases

14. Boyle’s Law P a 1/V Constant temperature P x V = constant
Constant amount of gas
P x V = constant
P1 x V1 = P2 x V2

15. A scientific research helium balloon.
5.5
Page 187
An inflated helium balloon with a volume of 0.55 L at sea level (1.0 atm) is allowed to rise to a height of 6.5 km, where the pressure is about 0.40 atm.
Assuming that the temperature remains constant, what is the final volume of the balloon?
A scientific research helium balloon.

16. Variation in Gas Volume with Temperature at Constant Pressure
As T increases
V increases

17. Variation of Gas Volume with Temperature at Constant Pressure
Charles’s & Gay-Lussac’s Law
V a T
**Temperature must be
in Kelvin
V = constant x T
V1/T1 = V2 /T2
T (K) = t (0C)

18. Variation
P a T
P = constant x T
P1/T1 = P2 /T2

19. Electric lightbulbs are usually filled with argon.
5.6
Page 188
Argon is an inert gas used in lightbulbs to prevent the vaporization of the tungsten filament.
A certain lightbulb containing argon at 1.20 atm and 18°C is heated to 85°C at constant volume.
Calculate its final pressure (in atm).
Electric lightbulbs are usually filled with argon.

20. Avogadro’s Law V a number of moles (n) V = constant x n
Constant temperature
Constant pressure
V a number of moles (n)
V = constant x n
V1 / n1 = V2 / n2

21. Summary of Gas Laws
Boyle’s Law

22. Charles’s Law

23. Avogadro’s Law

24. Ideal Gas Equation 1 Boyle’s law: P a (at constant n and T) V
Charles’s law: V a T (at constant n and P)
Avogadro’s law: V a n (at constant P and T)
V a nT P
V = constant x = R nT P
R is the gas constant
PV = nRT

25. PV = nRT PV (1 atm)(22.414L) R = = nT (1 mol)(273.15 K)
The conditions 0 0C and 1 atm are called standard temperature and pressure (STP).
Experiments show that at STP, 1 mole of an ideal gas occupies L.
PV = nRT
R = PV nT =
(1 atm)(22.414L)
(1 mol)( K)
R = L • atm / (mol • K)

26. 5.3
Page 186
Sulfur hexafluoride (SF6) is a colorless and odorless gas.
Due to its lack of chemical reactivity, it is used as an insulator in electronic equipment.
Calculate the pressure (in atm) exerted by 1.82 moles of the gas in a steel vessel of volume 5.43 L at 69.5°C.

27. Combined Gas Law
Ideal gas law is useful when P, V, n, T are not changing, but at times we need to deal with changes in P, V, n, T
Since, n1 = n2

28. 5.7
Page 189
A small bubble rises from the bottom of a lake, where the temperature and pressure are 8°C and 6.4 atm, to the water’s surface, where the temperature is 25°C and the pressure
is 1.0 atm.
Calculate the final volume (in mL) of the bubble if its initial volume was 2.1 mL.

29. 5.4
Page 186
Calculate the volume (in L) occupied by 7.40 g of NH3 at STP.

30. Density (d) Calculations d = PM RT n V = P RT m MV = P RTso
n = m M
m is the mass of the gas in g
d = m V
M is the molar mass of the gas
Molar Mass (M ) of a Gaseous Substance
dRT P
M =
d is the density of the gas in g/L

31. 5.8
Page 190
Calculate the density of carbon dioxide (CO2) in grams per liter (g/L) at atm and 55°C.

32. 5.9
A chemist has synthesized a greenish-yellow gaseous compound of chlorine and oxygen and finds that its density is 7.71 g/L at 36°C and 2.88 atm.
Calculate the molar mass of the compound and determine its molecular formula.

33. Gas Stoichiometry

34. 5.11
Page 193
Calculate the volume of O2 (in liters) required for the complete combustion of 7.64 L of acetylene (C2H2) measured at the same temperature and pressure.
The reaction of calcium carbide (CaC2) with water produces acetylene (C2H2), a flammable gas.

35. Dalton’s Law of Partial Pressures
V and T are constant P2
Ptotal = P1 + P2 P1

36. PA = nART V PB = nBRT V XA = nA nA + nB XB = nB nA + nB PT = PA + PB
Consider a case in which two gases, A and B, are in a container of volume V.
PA =
nART V
nA is the number of moles of A
PB =
nBRT V
nB is the number of moles of B
XA = nA
nA + nB
XB = nB
nA + nB
PT = PA + PB
PA = XA PT
PB = XB PT
Pi = Xi PT
mole fraction (Xi ) = ni nT

37. 5.14
Page 198
A mixture of gases contains 4.46 moles of neon (Ne), 0.74 mole of argon (Ar), and 2.15 moles of xenon (Xe).
Calculate the partial pressures of the gases if the total pressure is 2.00 atm at a certain temperature.

38. Kinetic Molecular Theory of Gases
A gas is composed of molecules that are separated from each other by distances far greater than their own dimensions. The molecules can be considered to be points; that is, they possess mass but have negligible volume.
Gas molecules are in constant motion in random directions, and they frequently collide with one another. Collisions among molecules are perfectly elastic.
Gas molecules exert neither attractive nor repulsive forces on one another.
The average kinetic energy of the molecules is proportional to the temperature of the gas in kelvins. Any two gases at the same temperature will have the same average kinetic energy
SI unit = joule (J) = 1 kgm2/s2 = 1Nm
KE = ½ mu2

39. KE α T
½mu2 α T
KE = ½mu2 = CT

40. Distribution of Molecular Speeds
The distribution of speeds for nitrogen gas molecules at three different temperatures

41. The distribution of speeds
of three different gases
at the same temperature

42. Root-mean-square speed
Average molecular speed
KE = 3/2RT
NA(1/2mu2) = 3/2RT
NAm = M
u2 = 3RT/M
√u2 = urms =
3RT M 

43. 5.16
Calculate the root-mean-square speeds of helium atoms and nitrogen molecules in m/s at 25°C.

44.  M2 M1 NH4Cl NH3 17 g/mol HCl 36 g/mol
Gas diffusion is the gradual mixing of molecules of one gas with molecules of another by virtue of their kinetic properties. r1 r2 M2 M1  =
molecular path
NH4Cl
NH3
17 g/mol
HCl
36 g/mol

45. Gas effusion is the process by which gas under pressure escapes from one compartment of a container to another by passing through a small opening. = r1 r2 t2 t1 M2 M1 

46. 5.17
A flammable gas made up only of carbon and hydrogen is found to effuse through a porous barrier in 1.50 min.
Under the same conditions of temperature and pressure, it takes an equal volume of bromine vapor 4.73 min to effuse through the same barrier.
Calculate the molar mass of the unknown gas, and suggest what this gas might be.
Gas effusion. Gas molecules move from a high-pressure
region (left) to a low-pressure
one through a pinhole.

48. Deviations from Ideal Behavior
1 mole of ideal gas
Repulsive Forces
PV = nRT
n = PV RT
= 1.0
Attractive Forces

49. Effect of intermolecular forces on the pressure exerted by a gas.

50. ( ) } } Van der Waals equation nonideal gas an2 P + (V – nb) = nRT V2
corrected
volume }
corrected
pressure

51. 5.18
Given that 3.50 moles of NH3 occupy 5.20 L at 47°C, calculate the pressure of the gas (in atm) using
the ideal gas equation and
the van der Waals equation.