1. Review of Sketching, Lettering, and Text
Chapter 5 Jeopardy
Review of Sketching, Lettering, and Text

2. Lettering Technicalities
Sketching Techniques
Lettering Specs
Basics of Sketching
Lettering Technicalities
Text in CAD
Title Blocks
100
200
300
400
500

3. Sketching Techniques – 100
When sketching straight lines, what should you keep your eye on?
The termination point of the line.

4. Sketching Techniques – 200
Vertical lines should be sketch from ____________ to ___________.
From top to bottom.

5. Sketching Techniques – 300
All straight lines that are not horizontal or vertical are called what?
Inclined lines.

6. Sketching Techniques – 400
What technique might drafters use to obtain good proportions from a “real life” object?
The pencil-sight method.

7. Sketching Techniques – 500
When sketching an irregular curve, how many points should be included in each stroke?
Three.

8. Lettering Specs – 100
What is the standard style of lettering on drawings?
Gothic.

9. Lettering Specs – 200 b. HB, F, or H
Which is the most appropriate hardness of lead to be used for lettering?
4B, B, or HB
HB, F, or H
H, 2H, or 4H 4H
b. HB, F, or H

10. Lettering Specs – 300
Inclined Gothic letters should be sloped at an angle between…
68° and 75°.

11. Lettering Specs – 400
How many letters should equate the space between words within a note? How many between sentences?
One letter space between words.
Two letter spaces between sentences.

12. Lettering Specs – 500
What is the recommended overall height of fractions in freehand lettering?
Twice the height of the whole number.

13. Basics of Sketching – 100 b. Compass method
Which of the following is not considered a freehand sketching method for circles and arcs?
Free-circle method
Compass method
Centerline method
Enclosing square method
b. Compass method

14. Basics of Sketching – 200
What is the aim of freehand technical sketching?
To develop the ability to construct technical sketches without the use of aids.

15. Basics of Sketching – 300 d. Proportion
In order to covey an accurate description, the most important element in a technical sketch is…
Correct line weight
Straightness of lines
Curvature of lines
Proportion
d. Proportion

16. Basics of Sketching – 400
Which method for sketching an ellipse is similar to the enclosing square method for sketching a circle?
The enclosing rectangle method.

17. Basics of Sketching – 500
What shape does the trammel method help one draw? How does it work?
It helps draw an ellipse.
Half of the major and minor axis must be drawn on the trammel and it must be rotate along the established major and minor axis.

18. Lettering Technicalities – 100
Yes or No: A lettering guide is a useful device in constructing freehand lettering.
Yes.

19. Lettering Technicalities – 200
What is the minimum height of lettering on drawings?
1/8”

20. Lettering Technicalities – 300
Spacing between lines of lettering in notes should be ______ the height of letter on the drawing.
Two thirds (2/3”).

21. Lettering Technicalities – 400
Yes or No: Can one alternate between vertical and inclined text on a drawing?
No.

22. Lettering Technicalities – 500
These items are adhesive-backed sheets that “lay over” a drawing and can be used for title blocks and borders. What are these items called?
Overlays

23. Text in CAD – 100
What is the lettering on a CAD drawing called?
Text

24. Text in CAD – 200 Which command is used to place text on a drawing?
The Text Command.

25. Text in CAD – 300
To check spelling on a CAD drawing, which command should you use?
The Spell Command.

26. Text in CAD – 400
What determines how the text string will be placed in relation to a selected insertion point?
The justification.

27. Text in CAD – 500
What does one call the angle of each character in a string of inclined text?
The obliquing angle.

28. Title Blocks – 100
Should one use uppercase or lowercase letters on machine drawings?
Uppercase.

29. Title Blocks – 200 What are guidelines? How should they be drawn?
Guidelines are lines drawn to help keep lettering at a consistent height and angle.
Guidelines should be drawn lightly so that they won’t reproduce.

30. Title Blocks – 300
Yes or No: One can use different texts within a CAD drawing, for example, one style for the title block and another for dimensions.
Yes.

31. Title Blocks – 400
What is the importance of title blocks? Why must they be included in technical drawings?
Title blocks provide necessary information about the drawing.

32. Title Blocks – 500
On what types of drawings are lowercase letters generally used?
Maps and topographical drawings.