1. INTEGRATED CIRCUITS EE 2303

2. OVERVIEW  Introduction  What are Op-Amps?  Circuit symbol and Pin- Configuration  Inverting and Non-inverting modes..  Gain of an Op-Amp..  REFERENCES..

3. Introduction Amplifier is a device which senses an input and produces a larger version of it. Amplifiers are used to boost electrical signals in devices (radio, televisions..) Op-Amp: Class of High gain DC Amplifiers with two inputs and Single output

4. Symbol & Pin Configuration Inverting Input Non-inverting Input Output

5. Inverting and Non-Inverting Inverting Amplifier: Non- Inverting input is grounded. Signal is applied to the Inverting input. Output is 180 o out of Phase. http://www.national.com/onlineseminar/2003/opamps_basics/090303_Opamp_Trivia_Notes.pdf

6. Non-Inverting Amplifier Inverting input is grounded. Signal is applied to the Non-Inverting input. Output is in Phase.

7. Closed Loop Connection  “Output is applied back in to the Inverting Input.”  Used in both Inverting and Non- inverting modes of Operation. http://www.national.com/onlineseminar/2003/opamps_basics/090303_Opamp_Trivia_Notes.pdf

8. What is Gain?? Gain = Output / Input Gain of Op-Amp (Inverting Mode)=-R f /R 1 Gain of Op-Amp (Non-inverting Mode)=1+R f /R 1

9. Inverting Summing Amplifier VOUT=V1+V2

10. Op-amp as Oscillator

11. Differential and Common mode  Common Mode: When both inputs of the signal have the same common voltage..  Output will be zero in the common mode.

12. Pre-lab 1.Copy of LM741 Data Sheet ?? 2. What Is CMRR ?? 3. What is Slew Rate ??

13. REFERENCES http://www.national.com/onlineseminar/2003/opamps_ba sics/090303_Opamp_Trivia_Notes.pdf http://hyperphysics.phy- astr.gsu.edu/hbase/electronic/opamp.html#c4