1. 04013 Micro Turbine Senior Design Micro Turbine Senior Design CDR – May 14 th, 2004 Project 04013

2. 04013 Micro Turbine Senior Design Meet The Team

3. 04013 Micro Turbine Senior Design Meet The Team Donald Slate (ISE) Lucas Lessa (ISE) Ream Kidane (EE) Simien Lin (ME) – Project Manager Chuck Daze (ME) – Lead Engineer Matthew Davis (ME) Meg LaRochelle (ME) Thomas Cague (ME) Dr. Kozak – Faculty Advisor Dr. Hensel – Faculty Coordinator

4. 04013 Micro Turbine Senior Design Presentation Layout Overview Design Objectives Final Design and Setup Test Results Future Recommendations Closing Remarks

5. 04013 Micro Turbine Senior Design OVERVIEW

6. 04013 Micro Turbine Senior Design Purpose Micro Air Vehicle  Surveillance purpose  Approx. 90 grams. Use of batteries for electrical power. Search for lighter power source.

7. 04013 Micro Turbine Senior Design Background Micro Turbine Project Overall Scope  Replace Batteries  Mount onto MAV Last year’s design – Proof of concept was successful  18 watts of power  100 grams

8. 04013 Micro Turbine Senior Design Design Objectives

9. 04013 Micro Turbine Senior Design Design Objectives Produce 5 watts of electrical power Weight reduced to under 40 grams Ease of assembly and disassembly Design team’s own turbine Automate testing

10. 04013 Micro Turbine Senior Design Objectives Achieved Produced 5.5 watts  80 ohms resistance and 95 psig Max power output 14.7 watts  100 ohms resistance and 90 psig Mass of housing 36 grams Housing was reassembled/retested Designed turbine was fabricated Automation of testing through Labview

11. 04013 Micro Turbine Senior Design Final Design and Setup

12. 04013 Micro Turbine Senior Design Mechanical Design

13. 04013 Micro Turbine Senior Design Mechanical Design

14. 04013 Micro Turbine Senior Design Mechanical Design

15. 04013 Micro Turbine Senior Design Test Setup

16. 04013 Micro Turbine Senior Design Test Setup

17. 04013 Micro Turbine Senior Design Diagram of Delta Connection Orange Wire (Phase I) Brown Wire (Phase II)Yellow Wire (Phase III)

18. 04013 Micro Turbine Senior Design Labview System Diagram

19. 04013 Micro Turbine Senior Design Testing Results

20. 04013 Micro Turbine Senior Design Testing Results - Unflitered

21. 04013 Micro Turbine Senior Design Testing Results – Flitered

22. 04013 Micro Turbine Senior Design Future Recommendations

23. 04013 Micro Turbine Senior Design Future Recommendations Design to run off of compressed air cartridges Obtain RPM of generator Rigid coupling Machinability of materials (less burrs) Generator designed specifically for this purpose

24. 04013 Micro Turbine Senior Design Closing Remarks

25. 04013 Micro Turbine Senior Design Schedule

26. 04013 Micro Turbine Senior Design Budget

27. 04013 Thank You QUESTIONS?

28. 04013 Micro Turbine Senior Design Difficulties Encountered

29. 04013 Micro Turbine Senior Design Budget Assumed budget was $2,000.00, actual budget granted $1,000.00. $600.00 left to purchase a flow sensor ranging from $500.00 ~ $800.00 No extra funding left over for emergency usage. Talked to RIT to increase funding. Increased to $1200.00 with $100.00 as contingency.

30. 04013 Micro Turbine Senior Design Housing Pre-Fabrication Timing during Spring Break  Contacted vendors prior to spring break  Files did not work properly  Had to work through difficulties away from school during spring break Promising Vendors did not come through  Tight tolerances hard to achieve  Not used to fabricating nylon CIMS at RIT fabricated housing

31. 04013 Micro Turbine Senior Design Housing Post-Fabrication Main Housing  Lots of burrs located in hard to reach places  Clean up burrs without affecting tolerances Cap for housing  Could not fit at first  Designed lip was in the way of turbine  Leaks around the cap

32. 04013 Micro Turbine Senior Design Motor Issues 3 Phase Motor  Little knowledge concerning 3 phase motor  Acts like a AC motor  Labview not reading the output Delta Connection  To induce a load on motor  Allowed Labview to pick up voltage output

33. 04013 Micro Turbine Senior Design Labview Learning Labview Using right connections  SCXI 1102: Registers lower voltage  SCXI 1104: Registers higher voltage source Chassis burned out  Approval to switch chassis  Trouble shoot with NI tech support