1. Individual Subsystem Testing Report Team Name University/Institution Team Members Date

2. User notes: –This template shall be followed as closely as possible. –Deviations from this template will make it hard to assess your flight readiness. Without an understanding of your level of flight readiness, your chances of being awarded a primary position will be decreased.

3. Mission Overview –Briefly remind everyone what your mission is.

4. Functional Block Diagrams -A Functional block diagram of the entire system should be presented here. -By now, your payload should have excellent block diagrams after CDR completion.

5. Changes Since CDR –Has your system design changed significantly since CDR?

6. Program Management/Team Updates –Did anyone switch roles? –Were new team members added? –Has your schedule changed?

7. Schedule Update –Are you on budget? –What is your projected budget? –If you have budget issues, how will you resolve them?

8. Subsystem Overview -What subsystems do you have?: -Power (EPS) -Software -Command and Data Handling (C&DH) -Structures -Electrical -Science -… -Who will cover each?

9. Subsystem 1 -Status? -What is complete? -What isn’t (be honest)? -Pictures of subsystem -What tests were completed? -What were the results? -Failures? -Cause and solution to failure(s) -Each subsystem may take a few slides…

10. Subsystem 2 -Status? -What is complete? -What isn’t (be honest)? -Pictures of subsystem -What tests were completed? -What were the results? -Failures? -Cause and solution to failure(s) -Each subsystem may take a few slides…

11. Subsystem 3 -Status? -What is complete? -What isn’t (be honest)? -Pictures of subsystem -What tests were completed? -What were the results? -Failures? -Cause and solution to failure(s) -Each subsystem may take a few slides…

12. Subsystem n… -Status? -What is complete? -What isn’t (be honest)? -Pictures of subsystem -What tests were completed? -What were the results? -Failures? -Cause and solution to failure(s) -Each subsystem may take a few slides…

13. Plan to Subsystem Integration Report –You know where you are at… how will you ensure that your are integrated by the Subsystem Integration Report? –Do you foresee any issues?

14. Lessons Learned –What have you learned about larger engineering projects thus far? –What would you do differently next time? –What has worked that you will incorporate in your next large engineering project?

15. Conclusions –Issues and concerns –Closing remarks

16. Appendix –Additional data not immediately relevant to the presentation