1. P09233 Flight Parameter Measurements Michael Skube & James Hunt P09233 http://www.sensors.goodrich.com/prodo.shtml

2. Measurements Mission Statement The mission of the Measurements group is to provide a means for measuring and calculating all the necessary parameters for the flight of Unmanned Aerial Vehicles, primarily through the use of superior measuring devices and accurate dynamic characterizations. We strive to provide accurate data from our measurement systems for in-flight control and monitoring. We strive to exceed engineering standards while encouraging a environment for intellectual growth. The Measurements group will purchase and test a variety of pressure, temperature, and acceleration sensors. Focus will be not only on calibration and implementation of the sensors with a data acquisition system but also decide, with input from the Airframe and Controls groups, the locations for the sensors so they can provide the necessary information to control the airframe. Additional monitoring and measurements will be done on additional onboard airframe properties.

3. Preliminary Work Breakdown Structure StudentRoleWeek 0-1Week 1-2Week 2-3 Michael Skube Team Lead & Fluidics Engineer Organize team, introduce team to project and expectations, arrange meetings with R09230 Research measurement device supplier options Place order for initial measurement devices James Hunt Team Lead & Fluidics Engineer Organize team, introduce team to project and expectations, arrange meetings with R09230 Begin specifying desired measurement devices and range of measurements Finalize initial measurement device request John Isely Aeronautical Engineer Attend meetings, share expertise with parameter measurement Begin specifying desired measurement devices and range of measurements Finalize initial measurement device request William Atkinson Dynamics Engineer Attend meetings, share expertise with parameter measurement Begin specifying desired measurement devices and range of measurements Finalize initial measurement device request Heidi Morgan Electrical Engineer Attend meetings, share expertise with data collection Begin specifying required materials and Power Supply Finalize initial material requirements Joseph Peters Electrical Engineer Attend meetings, share expertise with data processing/storage Begin specifying required DAQ and other materials Finalize initial equipment requirements Kevin Li Electrical Engineer Attend meetings, share expertise with data processing Begin specifying required DAQ and other materials Finalize initial equipment requirements P09233

4. Target Deliverables Measure required parameters to characterize a test frame’s surrounding conditions as well as its internal conditions Provide accurate, relevant and continuous data for the Roadmap Project Additional measurements of onboard systems that require continuous measuring/monitoring Wireless communication between a fixed test stand and the test platform GPS tracking of the test platform Documentation on the sensors used and their implementation Exact design number and type of measurements, as well as the expected range of this data is still undetermined, but has been rudimentarily discussed P09233

5. Challenges Reliable and Repeatable Measurement Wireless Range Ordering and Receiving Parts Fundamental Understanding of Project Technologies Resources P09233