1. Op-Amps (2)

2. Non-Inverting Amplifier

3. Design Problem Design a non-inverting op-amp with a gain of 6. What is the approximate power supply if Vin must be kept between -1.5 V to 1.5 V ?

4. Annotation

5. Non-Inverting Amplifier VCC=9V VEE=-9 V VIN=0.5 V VOUT=3 V

6. Set Up the Simulator for DC Sweep

7. Probe Plot Right Click on the line, copy to the clip board, Paste data to an editor Add a port before running the DC Sweep

8. Data exported to a file Saturation Gain of 6!

9. Difference Amplifier

10. Design Problem Design this amplifier for a gain of 8 If VA is fixed at 1V and that power supply is +- 9V, what is the range of input voltage ?

11. Difference Amplifier

12. Vout Versus VB VA is held at 1 V

13. Vout Versus VB What is the gain of this amplifier?

14. Instrumentation Amplifier

15. Application: ECG Circuits Power line noise at 60 Hz.

16. ECG Signal on Oscilloscope

17. 3 Bit Digital to Analog Converter 741 Op-Amp Chapter 5

18. Thevenin Equivalent Circuit