1. NS1000 V3.0 - System Resource and Peripheral Incensement -
Rev July, 2013

2. Table of Contents
1. Overview
2. What is enhancement
3. How to program

3. Chapter 1
Overview 3

4. Features and Benefits >>
1. Overview
Solution
Selectable System capacity (flexibility configuration)
Features and Benefits >>
* Features New for V3
3 types of system capacity patterns
When you want to increase NT-phone capacity or H.323 capacity, you can change
the system capacity on customer demand.
NS1000 supports TDA100D via Stacking card.
TDA100D is added for Legacy Gateway of NS1000.

5. 1. Overview NS1000 adds new 2 types of system capacity patterns.
System capacity can be selectable based on customer demand.
Type-1: Standard Type (same as version 1.x & 2.x)
Same as current System resource.
This type will be used for the user who satisfy current system
configuration.
Type-2: IP Extension Type
Increase number of IP terminal and decrease number of SIP terminal
This type may be used for the user who want to increase NT phone.
Type-3: System Resource Type
Increase Tenant and H323 expanding
This type may be used for the user who want to increase more
Tennant and/or Q-Sig node
Note: This selection must be set when proceeding Easy Setup Wizard
TDA100D Cabinet can be Legacy GW for NS1000.
Add supported optional cards for Legacy GW.

6. Chapter 2
What is enhancement

7. 2-1 Selectable System capacity
Selectable Extension capacity
When select Type2 mode, IP-PT extension capacity will be increased up to 640.
In Type3 mode, SIP extension capacity will be changed.
Type
Stand alone
One Look
Type1
Extension Capacity
640
1000
IP-PT (KX-NT series)
256
SIP
SIP Phone
KX-UT series
Type 2
Type 3
384

8. 2-1 Selectable System capacity
Selectable IP-GW Capacity
When select Type3 mode, IP-GW (H323) capacity will be increased up to 96
Type
Stand alone
One Look
Type1
IP GW
256
H323 48 96
SIP
Type2
IP GW
Type3
128
160

9. 2-1 Selectable System capacity
Selectable Tenant Group capacity
When select Type3 mode Tenant Group capacity will be increased up to 128
Type
Stand alone
One Look
Type1 - Tenant
Tenant Group 32
Time Table
System Speed Dial
1000/Tenant
Type2 - Tenant
Type3 - Tenant
128
300/Tenant

10. 2-1 Selectable System capacity
Increase COS and Carrier for each Unit
Other resources will be increased
Resource　
Before (V1,V2)
After (V3)
Type1
ARS Carrier 48
128
No. of COS Group 64
512
User Group 96
256
Type2
Type3
COS 512, Carrier 128 per standalone unit

11. 2-2 Add TDA100D as Legacy GW Legacy Gateway by KX-TDA100D
Cabinet of KX-TDA100D can be used as Legacy Gateway to expand legacy trunks and phones. NS1000 can have stacking connection with TDA100D by changing MPR card to STACK-S card in TDA100D same as TDE series (KX-NS0132).
Remove MPR card
Insert
STACK-S card
Stack-S card S/W Version
should be or later
TDA100D
KX-TDA100D is allowed to be set with another KX-TDA100D on a NS1000 as
Legacy Gateway.
TDA100D add as additional GW category.
- Category1: NCP500 /NCP1000
- Category2: TDE100/200, TDA100/200
- Category3: TDE600/620, TDA600/620
- Category4: TDA100D

12. 2-2 Add TDA100D as Legacy GW Legacy Gateway by KX-TDA100D
The maximum number of Legacy Trunk and Extension
Stand-alone
Stacking system
One Look
Networking
Main
1NCP500
1NCP1000
1TDE/TDA100
1TDA100D
1TDE/TDA 200
1TDE/TDA 600
2NCP500
2NCP1000
2TDE/TDA 100
2TDA100D
2TDE/TDA 200
2TDE/TDA 600
Trunk(ch)
256
600
Legacy 30
64/64/120/120/128/160
128/128/240/240/256/256
LCOT 2
12/16/96/112/128/160
24/32/192/224/256/256
BRI 8
PRI23 23
46/46/92/92/92/115
92/92/184/184/184/230
PRI30
60/60/120/120/120/150
120/120/240/240/240/256 T1
48/48/96/96/96/120
96/96/192/192/192/240 E1
Extension(ch)
640
1000
Legacy*1
44/44/128/120/168/240
88/88/256/240/336/480
SLT
36/36/96/120/128/240
72/72/192/240/336/480
DPT
40/40/96/112/128/160
80/80/192/224/256/320
*1 : The maximum number with DXDP

13. 2-3 Add Optional cards Optional cards for Legacy Gateway
Following cards are supported for Legacy Gateways
For TDE100/200, TDA100D
Model
Symbol
Description
KX-TDA1176
MCSLC16
16-Port Single Line Telephone Card with Message Lamp
Interface
KX-TDA1178
MCSLC24
24-Port Single Line Telephone Card with Message Lamp
For TDE600/620
Model
Symbol
Description
KX-TDA6179
EMCSLC24
24-Port Single Line Telephone Card with CID & Message
Lamp Interface
For TDA100D
Model
Symbol
Description
KX-TDA1180
CLCOT8
8-Port Analogue Trunk Card with CID
KX-TDA1186
CLCOT8E
8-Port Analogue Trunk with Caller ID daughter Card

14. Chapter 3
How to Program

15. 3. Howe to Program System Initialize > Easy Setup Wizard
It is necessary to select the type while proceeding Easy Setup Wizard,
when you want to change System Capacity Type.
System Capacity Type can’t be changed while system running unless initialize NS1000.
Note: You can not select System Capacity Type when you upgrade
software from Version 2 to Version 3 without Off-Line Tool.

16. END

17. Appendix

18. Appendix System capacity
When you select type 2 or type 3 system capacity, V-SIPEXT capacity is
changed at each type.
Default : <Type 1> 20 cards (640 ports)
System Capacity Type 2
SIPEXT : 8 cards (256 ports)
System Capacity Type 3
SIPEXT : 12 cards (384 ports)

19. Modification
NS1000 V3.0 System Resource and Perifperal_Rev1.0_30Jul2013.pptx
- 1st release
Modified page 5 ‘overview’ and page 13 ‘Description for card’ .
- Revision 1.1