1. 90 Degree Haircut (Uniform Layers)

2. Preparation Gather Supplies and Disinfect Station
Sanitize Hands & Drape Manikin

3. Procedure Create a four section parting
Established the guideline length around back perimeter
Established the guideline length around front perimeter
Connect both guidelines over the ears

4. Procedure Continued
Establish the interior guide at top of head (near the apex)
Continued cutting guideline to front hairline above the forehead
Continued cutting guideline from crown to nape of the neck

5. Use VERTICAL partings to connect and blend top guide to bottom guideline
Start at the front, working around the head to the front on the opposite side of the head, cut from top guideline to the bottom guideline (Stand behind your cutting area)
Maintained a 90 degree elevation throughout procedure
Use a traveling guideline to maintain uniformly layered lengths

6. Performed cross check of procedure for accuracy by rotating around the head in the opposite direction and this time if cutting is needed, cut from bottom guideline towards the top guideline

7. Apply styling products & Blow-dry

8. Completion Use finishing products if desired Sweep up the floor
Clean and disinfect station

9. Finished Style