1. RADWIN 2000 Release 2.3 & WinLink 1000 Release 1.9 & BDU Release 6.2
Product Management

2. Main New Features Feature RADWIN 2000 WinLink 1000 HSS V
Monitored Hot Standby (MHS 1+1)
Diversity
Spectrum View

3. Hub Site Synchronization
No more limitations
HSS between
RADWIN 2000 radios
WinLink 1000 radios
RADWIN 2000 and WinLink 1000 radios
HSS up to 16 radios in a site
Fully supported by RADWIN Manager
Supported by software upgrade to RADWIN install base
All RADWIN 2000 radios in the field are HW ready for HSS

4. HSS Applications Access and Corporate Connectivity Backhaul
Where any links originate from a common hub site
With HSS by RADWIN 2000 such applications now support high capacity connectivity
Backhaul
HSS is needed in installations where a RADWIN 2000 link is the backhaul for many lower capacity access links
The backhaul link can be synchronized to the access links to mitigate potential mutual interference
Attack Plan
Identify existing customers with mixed network of WinLink and RADWIN 2000
Propose the HSS solution for mixed deployment

5. Monitored Hot Standby (MHS) 1+1
Providing redundancy and backup to TDM services
Targeted for Cellular backhaul
Providing protection against
Equipment failure (ODU and IDU)
Loss of air interface
Using a primary link and a secondary link:
Two RADWIN 2000 links
A RADWIN 2000 link and a WinLink link with new IDU-C
Two WinLink 1000 links with new IDU-C (single dual-pol antenna can be used)

6. MHS Applications
Provide high reliability high-capacity Point-to-Point links
Provide redundancy and high reliability for carrier class operators
Optimized for high capacity links operating in license-free bands
Additional values:
Each link can use a different band for maximum protection to the air interface
Affordable SLA can be offered by protecting part of the RADWIN 2000 trunks with WinLink 1000
Go To Market
Present the capability to Cellular Operators

7. MHS Spec
Supported in RADWIN 2000 by software upgrade to the install base
TDM service cut-over from the primary to the secondary link is completely automatic, less than 50 ms
Automatic restore to primary link as soon as it becomes available
Supports up to 16 TDM services for RADWIN 2000 and 4 TDM services for WinLink 1000
HSS is used between the links
Install both sites with HSS cables for additional protection
Ethernet services
No Ethernet 1+1
Ethernet traffic is always “on” on both links, while the TDM service is running only on one link
Each link carries different Ethernet traffic

8. Diversity Antenna diversity
Capacity 25 Mbps
MIMO
Capacity 50 Mbps
Antenna diversity
Uses two antennas
Each antenna experiences a different interference environment
The system chooses the best received signal providing enhanced robustness
Antenna diversity requires antenna separation, possible by two methods:
Polarization Diversity - combines a pair of antennas with orthogonal polarizations
Spatial Diversity - employs antennas that are physically separated from one another

9. Diversity – Receive Combining

10. Diversity – When to Use MIMO
Use MIMO Mode to get the highest capacity, up to 50 Mbps full duplex
Use MIMO when the air conditions are similar between the antennas
Use Diversity instead of MIMO in the following cases:
When the system cannot operate in MIMO Mode due to link conditions
When you get higher capacity in Diversity Mode than in MIMO Mode
Note that Diversity Mode requires understanding of the nature of interference and of the correct solution to deploy. Advise PS.
Remember that the capacity in Diversity is ½ than that of MIMO

11. Spectrum View An RF survey tool
Support link installation before service activation
Activated by the installer
Helps selecting the best channel during installation
Supports quick and easy installation

12. Spectrum View – Display Information
Spectral measurement for each of the 4 receivers that make the link
Spectral power measurements in 5MHz channel granularity
Current, average and maximum power per channel
Channels free from radars, with radars and barred (for DFS bands)
Scanned and un-scanned channels
Channels selected for ACS
Current operational channel
Time stamp of the last spectrum scan
Zoom, selective view of antennas and sites and detail level

13. Spectrum View – Tool Capabilities
Save and restore – save the spectral information and also view retrieved spectral information from historical spectrum scans
Diagnostics - the Spectrum View information is logged as part of the Diagnostics Information to improve link and system diagnostics and remote support. It can be retrieved from the RADWIN Manager menu with Help  Get Diagnostic Information
Management Integration - Spectrum view information is supported in RADWIN’s MIB and can be used by external Network Management applications
Designed for Unlicensed Spectrum – the spectrum measurement algorithms are designed to show accurate information while accommodating with variances in frequency, temperature and interference power and overcoming anomalies that tend to occur in high interference environments
Scanning Time – ~10 seconds for an entire band scan. It is recommended to scan for a few minutes for accurate results.

14. RADWIN 2000 products

15. 4.8 GHz Radio Motivation Product description
4.8 GHz is a licensed band
It is used mainly for security applications being part of the 4.4 – 4.9 GHz spectrum
It is used also for broadband applications
Product description
The only RADWIN product that supports the 4.8 GHz band
Connectorized only
Supported bands:
5.9 GHz Universal
5.8 GHz FCC/IC, 5.8 GHz MII China, 5.8 GHz WPC India
5.4 GHz FCC, 5.4 GHz IC, 5.4 GHz Universal
5.3 GHz FCC/IC, 5.3 GHz Universal
4.9 GHz FCC, 4.9 GHz Universal
4.8 GHz Universal (factory default)
2.4 GHz FCC/IC
4.8 GHz Universal band:
4.800 to GHz (occupied spectrum. Center frequencies to GHz)
Default channel GHz
Channel BW 20 MHz
Part number RW

16. RADWIN 2000 FCC Products Frequency 5.8GHz FCC/IC Integrated Ant.RW
5.8GHz FCC/IC Connectorized RW
2.4GHz FCC/IC Integrated Ant. RW
4.9GHz FCC Integrated Ant. RW
4.9GHz FCC Connectorized RW
5.9GHz Universal V -
5.8GHz FCC/IC
Factory Default
5.8GHz MII China
5.8GHz WPC India
5.4GHz FCC
5.4GHz IC
5.4GHz Universal
5.3GHz FCC/IC
5.3GHz Universal
4.9GHz FCC
4.9GHz Universal
2.4GHz FCC/IC

17. 2.4GHz FCC/IC Integrated Ant.
RADWIN 2000 Products for India
Frequency
5.8GHz WPC Integrated Ant. RW
5.8GHz WPC Connectorized RW
2.4GHz FCC/IC Integrated Ant. RW
5.8GHz WPC India
Factory Default -
2.4GHz FCC/IC V

18. 5.XGHz ETSI Connectorized
RADWIN 2000 Products for ETSI
Frequency
5.X GHz ETSI
Integrated Ant. RW
5.XGHz ETSI Connectorized RW
5.8GHz ETSI V
5.4GHz ETSI
Factory Default
5.3GHz ETSI

19. RADWIN 2000 Additional Products
Frequency
4.8GHz
Connectorized RW
6.0GHz Universal -
5.9GHz Universal V
5.8GHz FCC/IC
5.8GHz MII China
5.8GHz WPC India
5.4GHz FCC
5.4GHz IC
5.4GHz Universal
5.3GHz FCC/IC
5.3GHz Universal
4.9GHz FCC
4.9GHz Universal
4.8GHz Universal
Factory Default
2.4GHz FCC/IC

20. RADWIN 2000 Antennas Part Number Description RW-9611-4958
Flat panel, 1.2ft, dual polarization, gain 23dBi, GHz RW
Dish, 2ft, dual polarization, gain 28dBi, GHz RW
Flat panel, 1.2ft, dual polarization, gain 23dBi, GHz RW
Flat panel, 1.2ft, dual polarization, gain 22dBi, GHz RW
Flat panel, 1.2ft, dual polarization, gain 19dBi, GHz

21. WinLink 1000 Products

22. Solar Power Applications
WinLink 1000 New Products
Product
Freq. Channel
Tx Power
Region
Application
WL1000-ODU-VS/F24/FCC/CMB/EXT
2.312 – GHz
18dBm
Worldwide
Video Surveillance
WL1000-ODU-VS/F24/FCC/CMB/INT
WL1000-ODU-VS/F54/ETSI/CMB/EXT
5.140 – GHz
8dBm
Europe
WL1000-ODU-VS/F54/ETSI/CMB/INT
WL1000-ODU-VS/F58/FCC/CMB/EXT
4.940 – GHz
16dBm
WL1000-ODU-VS/F58/FCC/CMB/INT
WL1000-ODU-HE/F27/HP/EXT
2.700 – GHz
23dBm
India
Access, Backhaul
External FP Antenna for GHz
17dBi
WL1000-ODU-HE/F24/HP/EXT
Russia and Worldwide
WL1000-ODU-HE/F24/HP/INT
DC-PoE 12VDC-24VDC
Solar Power Applications
BDU AC Power Adaptor
MPtP

23. WinLink 1000 Modified Products
Frequency Range
Center Frequency Resolution
Product
Previous
New
Tx Power
WL1000-ODU/F54/HP/INT
5.500 – GHz
5.475 – GHz
20 MHz
5 MHz
18dBm
WL1000-ODU/F54/HP/EXT
WL1000-ODU/F54/HP/INT/PoE
WL1000-ODU/F54/HP/EXT/PoE
WL1000-ODU-HE/F54/HP/INT
23dBm
WL1000-ODU-HE/F54/HP/EXT

24. WinLink 1000 VS - Overview Video surveillance application requires:
High Capacity - Mega-Pixel cameras consuming high bandwidth
High robustness and reliability
Real Time - Focused alerts, maximum information for manned patrols
Mission-critical - No tolerance for system downtime or quality degradation
New WinLink 1000 VS Family - for Video Surveillance applications
Asymmetric Ethernet throughput 2/5Mbps, depends on product & distance
Up to 20Km distance
5, 10 & 20MHz channel BW
Multi-band support for all products
HSS support for all products

25. Video Surveillance - Project Types
Low-end
High-end
City surveillance (low scale)
Enterprise
Campuses
Plants
Gas stations
ATMs
City surveillance (high scale)
Border control
Railways security
Gas/Oil pipeline security
Facilities
Airports, seaports
Traffic surveillance 25

26. WinLink 1000 VS - Bands = Factory Default Band Band Con. Int.
VS/F58/FCC/CMB/EXT
VS/F58/FCC/CMB/INT
VS/F54/ETSI/CMB/EXT
VS/F54/ETSI/CMB/INT
VS/F24/FCC/CMB/EXT
VS/F24/FCC/CMB/INT
5.9 GHz Universal V
5.8 GHz FCC/IC
5.8 GHz WPC India
5.4 GHz Universal
5.3 GHz Universal
4.9 GHz Universal
5.8 GHz ETSI
5.4 GHz ETSI
2.4 GHz FCC/IC
2.4 GHz Universal
= Factory Default Band

27. Base Distribution Unit (BDU)

28. BDU Now GA New enhancement Release 6.2 replaces Release 6.1 beta
Each of the 8 ports can be set to either ODU or 802.3af PoE

29. Applications
BDU is part of RADWIN’s Multiple Point-to-Point (MPtP) architecture, providing a complete Hub solution for communication networks.
Typical applications include: Corporate Access by Service Providers, WiFi/WiMAX Backhaul and Video Surveillance projects.
Uplink - Ethernet / TDM 1

30. Thank You