2. Connect To Success

3. Selection & Proper Installation of Coax Connectors

4. A CONNECTOR is an extension of the coax cable and provides a means to connect the cable to an electronic device at the cable termination side …

9. Impedance 50 Ohm BNC 75 Ohm BNC

10. Twist-On GEM Part # 302-4TP

11. Cable’s vary from.195OD to.245OD.245 OD..195 OD

12. ¼” 9/16” Twist-On GEM Part # 302-4TP

13. Twist-On GEM Part # 302-4TP

14. Universal Crimp-On GEM Part Number 301-00TP

15. Universal Crimp-On GEM Part Number 301-00TP Not Vulnerable to Fluctuating Cable O.D.’s

16. Universal Crimp-On GEM Part Number 301-00TP RG6 PVC RG59 PVC RG6 Plenum RG58 PVC RG59 Plenum

17. Universal Crimp-On GEM Part Number 301-00TP

18. Universal Crimp-On GEM Part Number 301-00TP 7/16”

19. Crimp Ferrule Universal Crimp-On GEM Part Number 301-00TP Fold Braid 1/16” 1/4”

20. Universal Crimp-On GEM Part Number 301-00TP

21. Universal Crimp-On GEM Part Number 301-00TP.320 Hex Cable Support Hex Choices for Cable Support :.264 RG6 PVC,.250 RG59 PVC, RG6 TFE,.212 RG59 TFE, RG58 PVC

22. Crimp-Crimp GEM Part Number 305-4TP

23. Crimp-Crimp GEM Part Number 305-4TP Used for Higher Frequency Applications above 2 GHz Center Contact more closely matched to Center Contact of cable

24. Crimp-Crimp GEM Part Number 305-4TP Crimped or soldered contact provide Lower VSWR up to 4 GHz

25. Crimp-Crimp GEM Part Number 305-4TP Use 75 OHM Connector For High Frequency Systems above 1.2 GHz

26. Crimp-Crimp GEM Part Number 305-4TP 19/32” 5/16” 3/16” 3/32”

27. Crimp-Crimp GEM Part Number 305-4TP Dialectric Support Bushing

28. Crimp-Crimp GEM Part Number 305-4TP

29. Crimp-Crimp GEM Part Number 305-4TP

30. Crimp-Crimp GEM Part Number 305-4TP

31. Uni-Crimp GEM Part Number 301-75-2TP

32. Uni-Crimp GEM Part Number 301-75-2TP Cost Effective Compression Seal Type Connector

33. Uni-Crimp GEM Part Number 301-75-2TP Internal Cone Design Identical to the Compression Seal

34. Uni-Crimp GEM Part Number 301-75-2TP.320 HEX

35. Uni-Crimp GEM Part Number 301-75-2TP

36. Uni-Crimp GEM Part Number 301-75-2TP Cone Slides Between Dielectric and Inner Braid

37. Uni-Crimp GEM Part Number 301-75-2TP

38. Uni-Crimp GEM Part Number 301-75-2TP 1/4”

39. Uni-Crimp GEM Part Number 301-75-2TP 3/4”

40. Uni-Crimp GEM Part Number 301-75-2TP

41. Uni-Crimp GEM Part Number 301-75-2TP BENEFITS include EASY ASSEMBLY and SIMILAR PERFORMANCE AS COMPRESSION but at LOWER COST

42. Compression GEM Part Number 302-N2CSTP

43. Compression GEM Part Number 302-N2CSTP Accepts RG 59 Cable Range of.195 -.245

44. Compression GEM Part Number 302-N2CSTP Completely Captures Inside Components

45. Compression GEM Part Number 302-N2CSTP Mechanical Superiority Over Other Connector Styles

46. Compression Seal Will Not Pull Off EVER ! O Ring Prevents Water Wicking Up the Cable

47. F Connectors Are Completely Waterproof

49. 1 Assembly Procedure 1 Crimp Tool for F RCA and BNC Connectors And…will terminate the following cables: RG59 PVC, RG59 Plenum, RG6 PVC, RG6 Plenum, RG6 Dual/Tri/Quad, RG6 Quad Plenum Hand Tool GET-CS

50. NO CONNECTOR FAILURES EVER!

51. Compression GEM Part Number 302-N2CSTP 1/4”

52. Compression GEM Part Number 302-N2CSTP Fold Back Braid Mark Cable 1-1/8”

53. Compression GEM Part Number 302-N2CSTP Mark Cable

54. Compression GEM Part Number 302-N2CSTP BNC Die Head

55. Compression GEM Part Number 302-N2CSTP

56. Compression GEM Part Number 302-N2CSTP

57. Electrical Mechanical Cost Summary

59. www.GemElec.com