1. TRiiAGE Review
Amy Wang
RCM
Jan 22, 2013

2. Agenda
Removed SPS
Faulted Disk
Single-pathed Host

3. Removed SPS:
Relative SP fault LED will be lit

4. Removed SPS:
Relative DPE/SPE will display a fault

5. Removed SPS:
Excessive log entries in TRiiAGE_Splog.txt

6. Removed SPS:
Relative Part Number can be located in SPx_cfg_info.txt

7. Faulted Disk:
SP fault LED will be lit on from both SP

8. Faulted Disk:
Relative DAE will display a fault

9. Faulted Disk:
Array Issue Summary will display multiple failures

10. Faulted Disk:
Coherency check will display the disk removal information

11. Faulted Disk:
Rebuild flag will be set on relative LUNs sit on the disk

12. Faulted Disk:
SPx’s view information will display disk swap information
SPx’s view information will display the rebuild progress
LUN will fall in DEG mode before the rebuild is 100% complete

13. Faulted Disk:
Look for disk TLA number from detailed disk information

14. Single Pathed Host:
Array Issue Summary will display a failure in SGInfo Check

15. Single Pathed Host:
Storage Group and Initiator information will list the single pathed host:
C1. paths belong to another SP is not logged in

16. Single Pathed Host:
Storage Group and Initiator information will list the single pathed host:
c2. only see paths from a particular SP ( lab )

17. Single Pathed Host:
Storage Group and Initiator information will list the single pathed host:
c2. only see paths from a particular SP ( lab )

18. Single Pathed Host:
C3. the single path host belongs to SANCopy session