2. The 3.6m Yurt kit construction Manual/Photos Please be advised that Goulburn Yurtworks will not be held responsible for any mishaps that may happen to persons during the construction of a Yurt kit supplied by Goulburn Yurtworks.

3. Foundations Definitely something to get right! Levelling piers and concreting them in. Placing ant caps on.

4. Floor frames Placing the two floor frames down and bolting them together.

5. Tie down Attaching the chain the pier and the hardwood floor frame

6. Flooring Nailing down the Pyneboard sheets to hardwood frames

7. Wall frames Wall frames 1 by 1 are positioned and helped by a prop at the back to stand up. Then you start screwing them down

8. Wall frames Screwing down the wall frames

9. Wall Frames ½ way there!! Positioning walls where you want them, remember HAVE FUN!

10. Wall frames Wall frames up and hammering in the gang nails

11. Wall frames Gang nails hammered in to tops of Yurt walls

12. Roof Frames The use of the prop!

13. Roof Frames With the use the prop supplied by us, position your roof frames and bolt together

14. Roof Frames All bolted together

15. Roof frames Foundations in, floor frames down, floor sheets on, Walls up and roof frames bolted together in position, then attach your cable

16. Tension Cable Now you are ready to place your cable in and tension it up.

17. Tension Cable A good example of how your cable and roof frames should look!

18. Roof sandwiches Attach the first part of your sandwiches to the frame

19. Roof Sandwiches Mind yourself they can be heavy, attach as above

20. Roof Sandwiches Attach second part of the sandwich to the roof

21. Roof Sandwiches Make sure the bottom flaps and the over flaps are positioned properly

22. Roof Flashings Be sure the waterproof material is slid up

25. Cupola Lastly place your cupola on top and then your cover strips and fascias, Your Yurt is now………..

26. Your Finished Yurt FINISHED……….Now you are ready to deck out your little Yurt to suit your needs.