1. Power Generation Group
Sustainable Solutions in
Energy and Environment
Power Generation Group

2. Businesses THERMAX Boilers & Heaters Cooling & Heating
Power Generation
Chemicals & Water
Air Pollution Control
Renewable
Boiler & Heater
Large capacity
power boilers
Thermal oil / water heaters
Package boilers
Energy recovery
systems
Cooling
Exhaust & Multi-energy fired chillers
Steam fired chillers
Hot water fired chillers
Direct fired chillers
Turnkey Power Plants
Solid fuel based
Gas based combined cycle
Waste heat recovery based
RE based incl. Biomass, Bagasse, solar, etc.
O&M of power plants
Chemicals
Ion exchange resins
Cooling water chemicals
Fireside chemicals
Polyelectrolyte
Water and wastewater
Wastewater & Effluent water treatment systems
Water recycling
Waste management
Enviro
ESP & Bag filters
Scrubbers
Air purification
Retrofit & Revamp
Solar
Heating
Cooling
Heating
Steam/Hot water power plants
Packaged solid/oil/gas fired boilers
Fired thermic fluid heaters
Exhaust waste heat recovery boilers

3. At Power Generation Group
Effluents: 35+ years in effluent treatment plants, ASTP, CTBD, etc
Water: Over 35 years in supplying water treatment plants
…set up Power Plants. . .
Input
Output
Air pollution: 32+ years in supplying ESPs, bag filters, etc
Fuel combustion: 40+ years experience in firing over 100+ fuels
Output
Input
Operation &
Maintenance
services
including
manpower,
consumables
spares, etc
….to generate Power
Thermax in-house
manufacturing

4. Setting up power plants on Turnkey (EPC) basis
Design
Detailed Engineering
Supply
Project Management
O&M Management
Erection & Commissioning
Performance Guarantee
On Site Training
RISK MITIGATION
WORLD CLASS EQUIPMENTS & SERVICES
SINGLE POINT CONTACT
Manufacture

5. Our offerings (contd..)
1.Turnkey/ EPC (Engineer–Procure–Construct) solutions
Fossil fuel fired power plants
Solid fuel (coal/ peat/ lignite/ petroleum coke/washery rejects, etc) using pulverized (PC)/ fluidized bed (AFBC/ CFBC) boilers
Liquid/ Gaseous (Natural gas/ Naphtha)
Power plants based on waste heat recovered from
Sponge Iron (DRI) kilns
Cement manufacturing process
Coke oven battery
Blast furnace
Smelters
Biomass based power plants using grate (Traveling Grate/ Dumping Grate/Pin Hole Grate)/ bubbling bed boilers
Open cycle to closed cycle conversion through heat recovery steam generators (HRSG)
Solar PV/ CPV and solar thermal power plants

6. Our offerings (..contd)
2. Power projects on BOOT (Build–Own–Operate–Transfer) basis for
Biomass
Waste heat recovery
Distillery spent wash
3. FEED (Front End Engineering & Design) for power plants
4. Operation & Maintenance (O&M) of power plants and guarantee on:
Efficiency
Heat rate
Availability
Gross Power
Aux Consumption

7. Our strengths ENGINEERING PROJECT MANAGEMENT MANUFACTURING PROCUREMENT
*Manufacturing in
conformation
to international standards
& codes like ISO 9001 :
2000, ISO:14001, ASME,
DIN
*Shop floor approved by
reputed third party
engineering organizations
*Equipped with latest
software for GT Pro, ST
Pro, STAAD, Smart
Plant
*Projects designed to
meet international
standards
*Experience of working
with all major power
project consultants
*Advanced project
management tools &
satellite based
communication system for
on-site progress monitoring.
*Strong focus on
health, safety &
environment (OSHAS)
*Highest record of bonuses
for on time completion
PROCUREMENT
TECHNOLOGY
KNOW HOW
*Strong working
relationship with tier- 1
vendors of critical
packages
*Wide database of
domestic and overseas
vendors having
undergone our
stringent approval
processes
*Partnerships and
strategic alliances
like B&W, SPX,
Taiheiyo Engineering
*Dedicated R&D lab

8. Our experience More than 35% equipments are manufactured in-house
Over 70 projects on EPC basis
25 projects under long term O&M contracts
8000+ MW equivalent cumulative generation from boilers commissioned by us
Over 300 WTP’s treating water for power plants
More than 500 ESP’s for power generation serving over 5000 MW of power generation capacity

9. Our IT enablers State of the art software such as 3D Modeling,
GT Pro, ST Pro etc to simulate data.
Software such as CEASAR II & STAAD PRO
are used for piping stress & structural analysis.
Advanced project management
tools such as Primavera, MS Projects.
International engineering standards of ASME,
IBR,PED, AGA, Gost adopted.
Software such as Smart Plant are utilized to
simulate real time conditions.

10. Our sub-groups -Contracted 2 projects Large Power Plants Group
-EPC of BOP upto 1200 MW
Large Power Plants Group
350 MW
(Unit size)
Medium Power Plants Group
Contracted over 56 projects
POWER
DIVISION 3 MW
(Unit size)
Small Power Plants Group
Contracted projects
O&M Group
Contracted over 25 projects
Team of experts focused on addressing wide range of capacity requirements

11. Thermax advantage Over 70 Projects on EPC Recipient of many bullet
bonuses
Over 70 Projects on EPC
Wrap Around Guarantees
Ability To attract and mobilize resources
Fixed Cost
& Schedule
35% Equipments manufactured
In house
Alliance with
reputed
vendors

12. Profile of some of our projects
Meenakshi Energy Private Limited (2 x 150 MW)
CFBC boiler based power plant

13. Profile of some of our projects
Madras Cement Limited (2 x 36 MW)
AFBC boiler based power plant

14. Profile of some of our projects
Arvind Mills Limited (55 MW)
Gas/ Naphtha based cogeneration/ trigeneration plants

15. Breakthrough projects
Tata Sponge Iron Limited – One of the first plants in India to earn benefits from carbon credits
Kalpataru Power Transmission Limited – First biomass project in the world and the first project from India to be registered for CDM benefits
JK Cement Works, Nimbahera – Amongst the first projects in India to utilize the low temperature cement waste flue gas for power generation and eligible for CDM benefits
National Cement Company, Yemen – First solid fuel based plant in Yemen for the cement industry

16. Other prestigious projects
ONGC Mangalore Petrochemicals Limited – 72 MW
Grasim Industries – 96 MW
Indian Metals & Ferro Alloys – 120 MW
Steel Authority of India Limited – 42.5 MW
Madras Cement Limited – 157 MW
Number of projects handled by Power Generation Group*
Projects commissioned
(45 projects)
985 MW
Projects under execution
(27 Projects) MW
* As on 1st of April 2011

17. International experience
Client
Configuration
Sector
Offering
Status
Bataan 2020, Philippines
1 x 12.5 Cogen
Paper
EPC
Commissioned in 2009
Under Thermax O &M
Lamsan Inc., Philippines
1 x 3.5 Cogen
Corn Starch
Supply + Supervision
Under Execution (Thermax has completed 100% supply)
National Cement Co., Yemen
1 x 28
( 2 Boilers + 1 Turbine)
Cement
Under Execution
Yemen Co for Sugar Refining, Yemen
1 x 13.5 Cogen
Sugar

18. Power Generation Group offers O&M services to 26 projects (1873MW) *
O&M experience
Nuclear Power Corporation of India Limited (NPCIL)
Bharat Oman Refineries Limited
Hindustan Zinc Limited
Gupta Energy Limited
Philippine Trade Center,
Inc.
Power Generation Group offers O&M services to 26 projects (1873MW) *
*As on 1st of Sept 2011

19. Think Power Plants Think Thermax Contact Mr. Vivek Taneja
(Head – Business Development)
Contact No.: