1. System General Corp. AP350

2. AP350 Product Highlights
Achieving the highest throughput … With the least operator intervention !
An 4 sites (4 to 16 sockets) pick-and-place Automated programming Workstation, up to 16 sockets accommodated !
Throughput up to 1000UPH with zero programming time
Optional CCD inspection for marking, orientation, pin lead……
An Media Conversion Workstation to automate device media change between any two among Tray, tube and tape & Reel.
An Fully Integrated one-piece-flow Workstation for all the above operations.

3. The Programmer inside – Model 9600 – Key Features
Universal device programmer for EPROM, NOR- and NAND- type Flash memory, MCU and logic devices.
Multi-linkable up to 20 sites gang programming through USB or RS232
Synchronous and asynchronous operation modes available
112 pin truly universal and state-of-the-art pin drivers, expandable to 448 pins.
Universal adapter of most device packages up to 112 pins.
High speed programming - 64 Mbits Flash in 26 seconds !
High speed data download through USB interface – download 128 Mbits in less than 60 seconds from PC.
512 Mbits RAM buffer standard, expandable to 4 Gigabits.
Low voltage device support down to 1.2V
Fully configurable programming parameters for engineers

4. Model 9600 Accessories Single SKB for MCU , PLD , MPU
G2/G4 SKB for Flash Memory , Serial EE

5. AP350 Optional Advantages of AP350 – Automatic Tray Stacker
20 Trays at a time !

6. Tape In/Out

7. Tube In/Out

8. Label feeder

9. Comparison with Competitions – The Programming module
System General AP350
Competitor Px388
Comparisons of Programming module
Orientation
High-speed, universal
High speed for Flash only
No. of independent Pin Drivers
112 Pins
84 Pins
Future expandability
Up to 448 PINs
Not expandable
Devices supported
All memory, micro-controllers, logic and anti-fuses devices
Flash memory only
Support of NOR FLASH
NOR/MirrorBit/Strata/Stacked/MCP, Nand.
NOR/MirrorBit/Strata/Stacked/
MCP, Nand.
Support of NAND FLASH
Samsung, Toshiba, Micron, Hynix….
Samsung, Toshiba, Micron, Hynix
Programming speed (128Mbit)
Fast
Model
Items

10. Comparison with Competitions – The Handler configuration
System General AP350
Competitor Px388
Comparisons of the Handler
Number of sites
1 to 4 sites
4 sites
Expandability
Up to 16 socket
16 socket top
Automated Tray stacker
Holding 20 trays, optional
Optional TF20
Optical position alignment
In-place CCD
Off-site CCD only
64Mbit Flash throughput
750 Units/Hour
700 Unit/Hour
Automatic Teaching
~10 minutes, Automatic
30+ minutes, manual
Non-FLASH device support
Already included
Need to buy and change
New device support service
Free
Charge
Yield rate fine-tuning
Strategic Support Team
Slow response time
Model
Item

11. Online Free Device Driver Update

12. Thank you !!