Presentation is loading. Please wait.

Presentation is loading. Please wait.

Tektronix Confidential1 Introducing the TDS6000C Best Real-time Oscilloscope.

Similar presentations


Presentation on theme: "Tektronix Confidential1 Introducing the TDS6000C Best Real-time Oscilloscope."— Presentation transcript:

1 Tektronix Confidential1 Introducing the TDS6000C Best Real-time Oscilloscope

2 Tektronix Confidential2 Agenda  Industry, Applications, Measurements  Are there common requirements for your applications?  Introducing the New TDS6000C Series DSOs  What is the technology behind these products

3 Tektronix Confidential3 Customer Needs – Increasing signal speeds  Next generation serial data standards 1394b (400 Mbps) OC12/ST3 Optical Electrical 0.01 0.1 1.0 10.0 100.0 1990199219941996199820002002200420062008 Physical Signaling Gbps CEI Long reach - h SATA III (6 Gb) PCI Express II (5Gb) OC768 2G FibreChannel Rambus 800MhzRSL Rapid IO XAUI CEI Short XFI PCI Express SXI, TFI SATA II (3 SATA II (1.5Gb) 1394b InfiniBand HyperTransport GbE (1000 ) 10 GbE OC192 2G FibreChannel Rambus 800MhzRSL Rapid IO XAUI Reach XFI PCI Express SXI, TFI SATA II (3 Gb) SATA II (1.5Gb) 1394b InfiniBand HyperTransport BaseT 10 GbE 4G FibreChannel OC192 OC48 100 BaseT 1394b (400 Mbps) OC12/ST3 OC48 100 BaseT 1394b (400 Mbps) OC12/ST3  Testing and signal integrity challenges are growing as chips and boards increase in operating speeds and densities

4 Tektronix Confidential4 Customer Needs - Increasing Complexity  Compare PCI, PCI Express activity over the same time interval...  Traditional voltage vs. time display is insufficient for insight into signaling activity ► Verify clean transitions ► Measure setup and hold times ► 300 bits in same interval ► Recover spread spectrum clock embedded in data ► Sort transition, non-transition bits for mask test ► Jitter <30 ps >7ns >0ns CLK Input Input valid

5 Tektronix Confidential5 Business Challenges from Serial Data Implementation  Myriad of standards organizations and working groups to track –Requires time and expertise  End user products often contain multiple new standards –Integration and testing are of paramount importance  Design and debug efficiency are critical to meet Time to Market pressures –Never before has technology of this magnitude flowed so rapidly into consumer level products PCI Express (16x) USB 2.0 10/100/1000 Ethernet FBDIMM Serial ATA

6 Tektronix Confidential6 Introducing the TDS6000C DSO Series Introducing the 12GHz TDS6124C Uncompromised Performance for Demanding Applications  Fast  And Fastest Introducing the record breaking 15GHz TDS6154C

7 Tektronix Confidential7  World’s best performing oscilloscope and probing solution –A superior solution in every way –Leverages highest performing SiGe from IBM  Uncompromised performance for fast serial data standards  Nearly 90% faster than previous generation and 15% faster than any other oscilloscope  Pinpoint™  Pinpoint™ Trigger System with 3.125 Gb/s serial pattern, protocol trigger and data decode  Serial data/jitter analysis for next generation standards  Differential Probing with fast rise-time, high bandwidth and best signal fidelity Addressing Customer Needs for High Speed Serial Data Design, Debug and Compliance15 GHz BW Selectable DSP 40 40 GS/s on 2ch 20GS/s all 4 ch 64 64 M RL on 2ch 32M RL all 4 ch

8 Tektronix Confidential8 An Entirely New Front-End, SiGe at Heart  Partner with IBM, world leading technology company  Most advanced production qualified SiGe capabilities  Optimized for high-data rate and high frequency response  0.18-micron BiCMOS SiGe technology (3 rd generation) –High-performance SiGe combined with CMOS –Higher level of integration improving overall signal integrity  New Pre-Amp –High bandwidth –Improved signal integrity  New Track-and-Hold –Achieving 40 GS/s –Time base stability  ADC Interleaving –Flexible architecture –Longer effective record length

9 Tektronix Confidential9 Best of Analog, Best of Digital 15 GHz Bandwidth with User Selectable DSP  Highest bandwidth at 15 GHz with DSP –True analog bandwidth 12 GHz –Guarantee both analog (12 GHz) and DSP (15 GHz)  Benefits of DSP enhancement –Extended bandwidth and faster rise-time (15 GHz) –More accurate measurements with calibrated magnitude and phase response (12 GHz & 15 GHz) –Matched channels: channel-channel, unit-unit (12 GHz & 15 GHz)  User selectable –Independent On/Off control on each channel

10 Tektronix Confidential10 Acquisition Capability  Need simultaneous long record length and high sample rate at 40GS/s –Capture necessary long PRBS patterns: 2 23 -1 requires ~1.4ms @ 6 Gb/s –Analyze spread spectrum clock (SSC) modulation –Get the time resolution for low frequency noise measurements Required Time Window

11 Tektronix Confidential11 Why is Jitter Noise Floor important?  JNF establishes the lower limit of jitter measurements you can make using the oscilloscope.  Includes effects of noise, aperture uncertainty, time base stability, and interleaving error.  High Performance Real Time oscilloscopes have software that extracts the clock from serial data post-capture –JIT3v2, RT-Eye™v2  Time Interval Error (T.I.E.) measures the timing of all edges captured in the memory.  How is JNF measured on a real signal? A very stable clock is acquired. The T.I.E of all edges is measured. The standard deviation of this TIE is the JNF, the lower limit of jitter measurements on this scope.  Like any real measurement, the characteristics of the device measured effect the results.  High speed clock directly from the BERT is used. –Sine waves are not valid because they do not represent fast edges. –Data signals are not valid because they include data-dependent jitter.

12 Tektronix Confidential12 TDS6000C has the industry’s lowest Jitter Noise Floor Competitors have >2X-3X higher Jitter Noise Floor  Measure Low jitter 2.5GHz clock  TIE measured using JIT3 v2  400ns record Tek  40GS/s  Both differential and single ended measured Time Interval Error Std Dev TDS6154C Ch1-Ch3 224 fs TDS6154C Ch1 346 fs Tek’s superior aperture uncertainty and time base stability are increasingly important at higher speeds.

13 Tektronix Confidential13 Amplitude flatness and E.N.O.B. Typical ENOB with DSP ON Input FrequencyTDS6154CTDS6124C 10MHz5.55.7 1GHz5.35.5 2GHz5.35.5 3GHz5.15.4 4GHz5.15.3 5GHz5.15.3 6GHz4.95.2 7GHz4.75.2 8GHz4.55.2 9GHz4.55.2 10GHz4.55.2 11GHz4.35.2 12GHz4.35.2 13GHz4.5 14GHz4.5 15GHz4.5

14 Tektronix Confidential14 Linear Phase: Generator Phase error not corrected.. Phase response all four channels with BW+ OFF. The vertical axis is phase in radians and the horizontal axis is frequency in GHz. Phase response all four channels with BW+ on indicates high degree of channel match. The vertical axis is phase in radians and the horizontal axis is frequency in GHz.

15 Tektronix Confidential15 Triggering  Powerful triggering for fast, extensive debugging  Extended Pinpoint Trigger System - fastest, most complete trigger system available  SiGe technology –Highest performance in all trigger modes  Edge mode sensitivity to 9GHz (typical)  Glitch/Pulse Widths to ~100ps  RMS jitter <1.1ps (typical) –New: 3.125Gb/s serial pattern triggering Pinpoint: 1445 combinations Typical Triggering Systems: 17 combinations

16 Tektronix Confidential16 Why do Customers Need High Bandwidth?  Providing the accurate measurements required for next generation standards  TDS6154C is able to measure rise times of 30ps (20%-80%) within 5% accuracy Risetime error TDS6150C. Also risetime error of 15GHz Gausian  Actual measurement 30 ps within 5% accuracy

17 Tektronix Confidential17 Protocol Trigger for Serial Data – Option PTD  Efficiently Debug Serial Implementations –Trigger on protocol primitives and characters in real-time –Select patterns from a list of standard-specific primitives –Specify 8b/10b encoded characters and sequences for trigger –Trigger on 8b/10b coding errors (e.g. disparity or character error) –True triggering, not merely pattern search post acquisition Only oscilloscope in the world with real-time protocol triggering

18 Tektronix Confidential18 Live Demo:UWB WiMedia Power Spectral Density channel power mask test  Power Spectral Density  Channel power  UWB WiMedia identifies RF signal as TFC6 This prototype radio has a spur at 4.5GHz. Note circles on PSD plot and line on spectrogram at 4.5GHz Radio is operating in FFI mode.

19 Tektronix Confidential19 PROBING DEBUG ACQUISITION ANALYSIS & COMPLIANCE Questions?

20 Tektronix Confidential20


Download ppt "Tektronix Confidential1 Introducing the TDS6000C Best Real-time Oscilloscope."

Similar presentations


Ads by Google