1. About the company The JSC Elcon company was founded in 1998. Today the enterprise is one of the leading developers and producers of silicone coatings in Russia. Among our clients are the largest producers of the oven equipment, construction and oil-extracting companies:

2. Heat-resistant enamel Elcon Operating temperature range from - 60° to +800° c Possibility of drawing at negative temperatures The system of drawing doesn't demand preliminary priming Cold and hot curing coatings after drawing Drying time to "tack"-30 min The warranty period of service - not less than 15 years

3. Weatherproof enamel KO-174, KO-198, OS-12-03 Possibility of drawing at negative temperatures The system of drawing doesn't demand preliminary priming Cold curing coatings after drawing Drying time to "tack"-30 min

4. Auxiliary materials Rust solvent "Elcon P" Paint Remover “Elcon S” Composition for removal of insulating coatings during repair of electric motors "Elcon Electricity”

5. On December 25, 2009 the project on production of silicone coatings for protection of wood of JSC Elcon was recognized as priority innovative project of the Chuvash Republic. As a result of competition the contract with Ministry of Industry and Energy of the Chuvash Republic on implementation of this project had been signed. Decorative coatings

6. Wood means of protection on a silicone basis combine the best properties of impregnations on alkyd and acrylic bases - possess a unique combination of water-repellent properties and high vapor permeability Why our products are unique? impregnation on an alkyd basis impregnation on an acrylic basis

7. Field of application

8. 1) Elcon Bio Silicone impregnation Elcon Bio is intended for processing of wooden designs of residential and industrial buildings as well as outside, and indoor for the purpose of protection against rotting, a mold, insects- woodborers and atmospheric effects.

9. Impregnation prevents wet surfaces even in case of intensive atmospheric effects, thus vapor permeability of a surface remains (wood "breathes"). Coating on an acrylic dispersion Coating on an alkyd basis

10. 2) Elcon SealTech Silicone impregnation Elcon SealTech is intended for protection of end faces of wood against cracking, rotting, a mold, insects-woodborers and atmospheric effects. Impregnation effectively prevents the formation and development of cracks during natural drying of wood

11. The сomposition deeply penetrates along wood fibers, forming on a face surface the special air-permeable water-repellent covering normalizing process of evaporation of excess moisture from wood. Traditional covering

12. 3) Elcon Sauna Silicone impregnation Elcon Sauna is intended for complex protection of wood inside the baths and saunas. The composition protects wood from rotting, a mold, insects- woodborers in the conditions of high temperatures and plentiful cyclic moistening.

13. Impregnation deeply penetrates into the wood, forming on its surface transparent vapor-water-resistant coating Traditional covering

14. 4) Elcon Aqwell Hydrophobizator (waterproofing agent) Elcon Aqwell is intended for superficial protection of concrete, foam concrete, a brick, a stone against moisture penetration. Impregnation prevents development of fungi, a mold, a moss, keeping vapor permeability of a surface, considerably increasing resistance to temperature extremes.

15. Impregnation penetrates deeply into material, forming on its surface a vapor- permeable water-repellent covering. Traditional hydrophobizator 30% admissible humidity of a surface before processing up to 20 mm up to 5-7 mm

16. 5) Elcon Heat-resistant enamel Elcon is intended for protective coating of metal and other surfaces which are affected in use by temperatures from -60 to +800 о С (heat resistance varies depending on the color of a covering).

17. The palette of standard colors Silver grey up to 800'C/up to 650'C Black up to 750'C/up to 600'C Green up to 600'C Red-brown up to 500'C Grey up to 500'C Brown up to 500'C Red up to 400'C Yellow up to 400'C Dark blue up to 400'C Blue up to 400'C Beige up to 400'C Orange up to 400'C

18. 6) Elcon The heat-resistant varnish Elcon is intended for protective processing of the brick, concrete, ferroconcrete, metal, asbestos- cement and other surfaces which are affected in use by temperatures from-60 to +250 о С.

19. Thank you for your attention!