1. Motor Vehicle Level 3 Hydraulic Components Resource 3

2. Motor Vehicle Level 3 Resource 3 Aims Hydraulic Components To recognize the role of a hydraulic system within an ABS system

3. Objectives By the end of the session you will be able to: Identify Hydraulic ABS components Recognize the various channel set ups available for ABS systems Identify basic maintenance procedures for hydraulic systems. Describe the operation of hydraulic components and their need. Motor Vehicle Level 3 Resource 3 Hydraulic Components

4. Revision ABS prevents wheel lock up under heavy braking, it also gives the driver steering control under a skid Without ABS the brakes can be applied with enough force to lock the wheels making the vehicle uncontrollable (no traction between the tires and the road surface. ABS controls each wheel separately by fluctuating the brake pressure when the wheel is deemed to be near locking. If ABS fails, normal braking will not be affected. Motor Vehicle Level 3 Resource 3 Hydraulic Components

5. Hydraulic ABS components ABS Actuator Controls the hydraulic brake pressure to each disc brake calliper or cylinder This is based upon information received from sensors, so that the wheel speed can be controlled. Motor Vehicle Level 3 Resource 3 Hydraulic Components

6. Hydraulic ABS Components The actuator provides three operating modes to control the wheel speed Pressure Holding Pressure Reduction Pressure Increase Motor Vehicle Level 3 Resource 1 Hydraulic Components

7. Toyota ABS set up Motor Vehicle Level 3 Resource 1 Hydraulic Components

8. Actuator positions-pressure reduction Pressure reduction- the inlet valve is closed, this opens the return valve. Thus, decreasing the brake pressure, reducing the risk of locking. Any left over fluid will return to the reservoir. Motor Vehicle Level 3 Resource 3 Hydraulic Components

9. Actuator positions- pressure holding When the ECU (Electronic Control Unit) senses there is an enough drop in pressure to prevent wheel locking the return valve and the pressure is maintained. Motor Vehicle Level 3 Resource 3 Hydraulic Components

10. Actuator positions-pressure increase If the wheel speed sensors indicates that the wheel is spinning freely, the input valve will be open, causing pressure increase to slow down/stop the vehicle. Motor Vehicle Level 3 Resource 3 Hydraulic Components

11. ABS channel set ups Depending on the vehicle, will depend on what channel set up there is, the most common ones are:- Motor Vehicle Level 3 Resource 3 Hydraulic Components

12. Four-channel, four-sensor ABS Speed sensor on all four wheels Separate valve for all four wheels. With this setup, the controller monitors each wheel individually to make sure it is achieving maximum braking force. Motor Vehicle Level 3 Resource 3 Hydraulic Components

13. Three-channel, three-sensor ABS Speed sensor and a valve for each of the front wheels one valve and one sensor for both rear wheels. Rear wheel speed sensor is located on the axle. This system provides individual control of the front wheels, so they can both achieve maximum braking force. The rear wheels, however, are monitored together; they both have to start to lock up before the ABS will activate on the rear. Therefore, it is not as effective Motor Vehicle Level 3 Resource 3 Hydraulic Components

14. One-channel, one-sensor ABS One valve, which controls both rear wheels, and one speed sensor, located in the rear axle. The rear wheels are monitored together and they both have to start to lock up before ABS operation. Motor Vehicle Level 3 Resource 3 Hydraulic Components

15. Basic Maintenance It is important to change the brake fluid at the correct intervals, if not the brake fluid will lose it’s properties and will be less effective. Investigation Investigate what other basic maintenance is needed on ABS systems. Motor Vehicle Level 3 Resource 3 Hydraulic Components

16. Summary We have today.... Identified Hydraulic ABS components Recognized the various channel set ups available for ABS systems Identified basic maintenance procedures for hydraulic systems. Described the operation of hydraulic components and their need. Motor Vehicle Level 3 Resource 3 Hydraulic Components