Presentation is loading. Please wait.

Presentation is loading. Please wait.

DRAFTING TECHNIQUES II 155. Auxiliary Views Auxiliary Views are easily made. When more specific detail of a part is needed, go to the VIEWS toolbar, then.

Published byMeaghan Pearce Modified over 9 years ago

Similar presentations

Presentation on theme: "DRAFTING TECHNIQUES II 155. Auxiliary Views Auxiliary Views are easily made. When more specific detail of a part is needed, go to the VIEWS toolbar, then."— Presentation transcript:

1 DRAFTING TECHNIQUES II 155

2 Auxiliary Views Auxiliary Views are easily made. When more specific detail of a part is needed, go to the VIEWS toolbar, then click auxiliary view. Auxiliary View 156

3 To make the view, click once to start your view plane, and again to end it. Once this is done, you will see a full colour, solid auxiliary view that you may move within limitations. Move the auxiliary view to where you want it and then click one more time to set it in place. Click once here to start Click again here to finish 157

4 After you set it in place, the auxiliary view will become a line drawing like the rest of the drafting, and can be manipulated as such. 158

5 If you want to change the properties of a line, click once on the line to activate it and then right click and pick properties. 159

6 Now you can change any of the lines properties. You can manipulate the lines colour, weight and style. By putting the cursor on WEIGHT, CATIA will show you what weight the line currently is. 160

7 Text can be manipulated in the same way. Just click on the word you want to manipulate, and under FONT you can change the words font, style and size. 161

8 Under FRAME AND POSITION you can change lines, anchor points, justification, reference, orientation and the angle of words, 162

9 Under GRAPHICS, as mentioned earlier, you can change the graphical representation of underlining. 163

10 To make a proper TITLE BLOCK, you can add proper line spacing as found in any drafting text. Once the lines are in, you can begin to fill it in by going to INSERT, ANNOTATIONS, TEXT STYLES, and then TEXT. 164

11 Click where you want the text to start, and a TEXT EDITOR box will appear. What you type there will appear in your title block. If it doesn’t end up right where you want it, the text can easily be moved. 165

12 If the text needs to be moved, as seen here, you can click on the edge of the displayed box, and by holding down the left mouse button, you will grab the edge of the box and manually move it by moving the mouse. 166

13 Here we have a finished title block. If there are changes that you wish to make at this point, just left click once on the word, go to edit (or right click) and enter properties to make the changes. 167

Download ppt "DRAFTING TECHNIQUES II 155. Auxiliary Views Auxiliary Views are easily made. When more specific detail of a part is needed, go to the VIEWS toolbar, then."

Similar presentations

Introducing Macromedia FreeHand MX

Introducing Macromedia FreeHand MX
Microsoft Excel. Click on “Start,” then “Microsoft Office Excel.”

Microsoft Excel. Click on “Start,” then “Microsoft Office Excel.”
MODULE 5 B WORD PROCESSING. cont How to Add Colour to Your Microsoft Word Logo To add a coloured background to your shape, do the following: Make sure.

MODULE 5 B WORD PROCESSING. cont How to Add Colour to Your Microsoft Word Logo To add a coloured background to your shape, do the following: Make sure.
Chapter 5 Creating and Editing Drawing Views. After completing this chapter, you will be able to – Understand drawing options – Create and edit drawing.

Chapter 5 Creating and Editing Drawing Views. After completing this chapter, you will be able to – Understand drawing options – Create and edit drawing.
DRAFTING and DIMENSIONING 98. A properly dimensioned drawing of a part is very important to the manufacturing outcome. With CATIA, it can be a very simple.

DRAFTING and DIMENSIONING 98. A properly dimensioned drawing of a part is very important to the manufacturing outcome. With CATIA, it can be a very simple.
Sean Dalton www.itsligo.ie/staff/sdalton. Solid Edge Draft Solid Edge draft is an environment which allows the creation engineering drawings directly.

Sean Dalton Solid Edge Draft Solid Edge draft is an environment which allows the creation engineering drawings directly.
Slide Transitions Slide Show, Slide Transition opens Slide Transition task pane Practice each option setting to select the transition style, its speed,

Slide Transitions Slide Show, Slide Transition opens Slide Transition task pane Practice each option setting to select the transition style, its speed,
Back to Table of Contents Advanced PowerPoint Techniques Prepared by Pat Samuel WS 445/545 - Feb. 2007.

Back to Table of Contents Advanced PowerPoint Techniques Prepared by Pat Samuel WS 445/545 - Feb
Microsoft Office © Copyright William Rowan 2007. Objective By the end of this you will have being given a brief introduction to: Microsoft Word Microsoft.

Microsoft Office © Copyright William Rowan Objective By the end of this you will have being given a brief introduction to: Microsoft Word Microsoft.
EDU 271 Using Microsoft Word.

EDU 271 Using Microsoft Word.
Text Boxes and WordArt Guided Lesson.

Text Boxes and WordArt Guided Lesson.
ESL PowerPoint Demonstration The Effective Use of Presentation Software in the ESL Classroom By Daniel Craig University of Illinois ESL 401 J.

ESL PowerPoint Demonstration The Effective Use of Presentation Software in the ESL Classroom By Daniel Craig University of Illinois ESL 401 J.
SolidWorks Teacher Guide Lesson6 School’s Name Teacher’s Name Date.

SolidWorks Teacher Guide Lesson6 School’s Name Teacher’s Name Date.
Training 1 FrontPage Creating Web Pages. 2 Objectives 1. Open FrontPage. 2. Create Web pages. 3. Insert pictures 4. Create a hyperlink from a picture.

Training 1 FrontPage Creating Web Pages. 2 Objectives 1. Open FrontPage. 2. Create Web pages. 3. Insert pictures 4. Create a hyperlink from a picture.
1 Exercise Two The Digital Camera Helpful Notes 2004.

1 Exercise Two The Digital Camera Helpful Notes 2004.
Customizing forms and writing QuickBooks Letters Lesson 15.

Customizing forms and writing QuickBooks Letters Lesson 15.
DRAFTING TECHNIQUES I 136. Here is a basic shape. From here, we will do some advanced drafting once we put this shape on a sheet as a drawing. Select.

DRAFTING TECHNIQUES I 136. Here is a basic shape. From here, we will do some advanced drafting once we put this shape on a sheet as a drawing. Select.
PowerPoint. Basic Vocabulary Slide - Presentation - Slide layout – ► ► ► ► a single page in PowerPoint all the slides for a speech all the slides for.

PowerPoint. Basic Vocabulary Slide - Presentation - Slide layout – ► ► ► ► a single page in PowerPoint all the slides for a speech all the slides for.
Just Enough AutoCAD Chapter 9 Creating Text Adding and Formatting Text in AutoCAD Understanding Text and Scale Using Styles to Organize Your Fonts Adding.

Just Enough AutoCAD Chapter 9 Creating Text Adding and Formatting Text in AutoCAD Understanding Text and Scale Using Styles to Organize Your Fonts Adding.
MICROSOFT WORD GETTING STARTED WITH WORD. CONTENTS 1.STARTING THE PROGRAMSTARTING THE PROGRAM 2.BASIC TEXT EDITINGBASIC TEXT EDITING 3.SAVING A DOCUMENTSAVING.

MICROSOFT WORD GETTING STARTED WITH WORD. CONTENTS 1.STARTING THE PROGRAMSTARTING THE PROGRAM 2.BASIC TEXT EDITINGBASIC TEXT EDITING 3.SAVING A DOCUMENTSAVING.

Similar presentations

Ads by Google